IndoorManagertm Owners Manual
FCC RF Exposure Statement To satisfy RF exposure requirements, this device and its antenna must operate with a separation distance of at least 20 centimeters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
INSTRUCTION TO THE USER This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a typical installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
The Gatekeeper Systems IndoorManagertm (IM) is a general purpose transmitter used to communicate with the Gatekeeper Systems SmartWheeltm family of wheels. Installation and configuration of the IM should only be performed by qualified Gatekeeper Systems personnel. To power on the IM, open the cover and press the power switch down. See figure 1. The status of the IM may be determined by the status LEDs located on the side of the IM. See figure 2 and Table 1 for details.
Power Switch Location Figure 1
Figure 2 Status LEDs Status LED Summary LED Meaning Solid Green Unit is powered up (either by AC or from the internal battery) Solid Yellow Unit is operating from internal battery – check AC power Flashing Yellow Internal battery fault or disconnected – Contact Gatekeeper Systems Flashing Red Unit is misconfigured – Contact Gatekeeper Systems Solid Red Hardware fault – Contact Gatekeeper Systems Table 1
Contacting Gatekeeper Systems For more information about the Indoor Manager and troubleshooting, to order parts or report an issue, contact the Gatekeeper Systems Inc. regional Customer Support office nearest to your location. USA Gatekeeper Systems, Inc. 8 Studebaker Irvine, CA 92618 (888) 808-9433 Canada Gatekeeper Systems Canada, Ltd.
