Long Range Transmitter 2 (D-9670A) User Manual 1
INSTRUCTION TO THE USER This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a typical installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1. Long Range Transmitter 2: The Gatekeeper Systems D-9760A Long Range Transmitter 2 contains two 2.4GHz transceivers and it is used to send commands to and receive data from the Gatekeeper Systems wheels. 2. Long Range Transmitter 2 details: Green LED Screw Mounting Holes Connector Block DIP Switch Power up Long Range Transmitter 2, by providing +3.3V DC power supply or AC/DC adaptor (which do not included in the selling package) at connector block pin 1 and grounding at connector block pin 4.
DIP Switch Definition: 4
Contacting Gatekeeper Systems For more information about the Long Range Transmitter 2 and troubleshooting, to order parts or report an issue, contact the Gatekeeper Systems Inc. regional Customer Support office nearest to your location. Hong Kong Gatekeeper Systems (HK), Ltd. 36/F, Tower 2, Times Square 1 Matheson Street, Causeway Bay, Hong Kong USA Gatekeeper Systems, Inc. 8 Studebaker Irvine, CA 92618 (888) 808-9433 Canada Gatekeeper Systems Canada, Ltd.
