Operating Instructions Electric Sausage Cutter Automatic Art.-Nr.
Carefully read all provided instructions before you start running the appliance and pay regard to the warnings mentioned in these instructions.
Features of your Electric Sausage Cutter Automatic Funnel tube On / Off button Knurled nut Flang ring Casing Ejection port Automatic button Panel of the bottom On / Off button Double sickle knife Strut Knurled nut 15
Important instructions Always IMMEDIATELY unplug the appliance after use and before assembling or dismantling the blending tool and before laying down the appliance. Always ensure that the appliance is assembled correctly before connecting the appliance to the mains power supply. The appliance has a safety device which ensures that the motor is unable to operate if the appliance is not correctly assembled. The blade of the Sausage Cutter is extremely sharp. Do not touch the blade.
motor housing or to repair the power cord. Check the entire appliance regularly for proper operation. The appliance is likely to be damaged if the appliance is subject to inadmissible strain (i.e. overheating, mechanical or electric shock) or if there are any cracks, excessively frayed parts, distortions or the gear stalls or sticks. In this case, immediately unplug the appliance and return the entire appliance (including all parts and accessories) to an authorised service centre for examination and repair.
Important safeguards for all electrical appliances • Ensure that the voltage rating of your mains power supply corresponds to the voltage requirements of the appliance (220/230 V, 50 Hz, AC). Always connect the appliance directly to a mains power supply wall socket with protective conductor (earth) connected properly. The installation of a residual current safety switch with a maximum rated residual operating current of 30 mA in the supplying electrical circuit is strongly recommended.
Usage WARNING: Operate the appliance on a well accessible, stable, level, dry, and suitable surface. Do not place any tissues or towels underneath the appliance to avoid risk of electric shock or fire. Before use and before connecting the appliance to the power outlet, always make sure that the appliance is properly and completely assembled. • Place a plate on the bottom panel underneath the ejection port, so it touches the automatic button.
1. Release the nuts that are attached to the cover turning them anticlockwise in order to remove the cover. Lift the cover straight across the nuts and then towards your body across the chevron. CAUTION: The blade is laying open. Beware not to cut yourself. 2. Wipe the motor housing and power cord with a damp soft cloth. Take care not to spill or drip water or any other liquids on the motor housing. 3. Disassemble the blade and the chevron for cleaning.
Cutting width adjuster Take off the cover. Release the nuts that are attached to the cover turning them anticlockwise. Lift the cover straight across the nuts and then towards your body across the chevron. CAUTION: The blade is laying open. Be aware not to cut yourself. There is a chevron in the front of the motorblock which is connected to the motorblock with two nuts. The chevron defines the width of the slices. Loosen the nuts of the device cover panel.
Warranty We guarantee that all our products are free of defects at the time of purchase. Any demonstrable manufacturing or material defects will be to the exclusion of any further claim and within 2 years after purchasing the appliance free of charge repaired or substituted. There is no Warranty claim of the purchaser if the damage or defect of the appliance is caused by inappropriate treatment, over loading or installation mistakes.
Gastroback GmbH Gewerbestraße 20 D-21279 Hollenstedt/Germany www.gastroback.de • www.tee.gastroback.de info@gastroback.