User’s Guide For GTM-56KM6 Faxmodem NOTICE Information furnished by Garnet Systems Coporation is believed to be accurate and reliable. However, no responsibility is assumed by Garnet Systems Corporation for its use, nor any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent rights of Garnet Systems Corporation other than for circuitry embodied in Garnet Systems products.
GTM-56KM6 User's Guide INTRODUCTION FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. N ote: This equipment has been tested and found to comply w ith the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
GTM-56KM6 User's Guide INTRODUCTION - Reorient or relocate the receiving antenna. - Increase the separation betw een the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to w hich the receiver is connected. - Consult the dealer or an experienced radio/ TV technician for help.
GTM-56KM6 User's Guide INTRODUCTION Table of Contents 1. INTRODUCTION. ……………………………..………………………3 2. INSTALLATION………………………………………………….…….5 2.1 INSTALLINGT THE MODEM…………………………………5 2.2 PLUG AND PLAY FUNCTION……………………………….7 2.3 DRIVER INSTALLATION IN WINDOWS 95/98/98SE……..7 2.4 HOW TO VERIFY MODEM INSTALLATION………………10 2.5 REMOVAL OF THE MODEM DRIVER……………………..12 3. MODEM COMMAND AND S-RESISTER…………………………..13 3.1 AT COMMAND…………………………………………………13 3.2 S-REGISTER………………..……………………………….
GTM-56KM6 User's Guide INTRODUCTION 1. INTRODUCTION The Garnet Systems GTM-56KM6 Host Software Processed V.90/K56flex Modem Device Family supports high speed analog data, high speed fax operation over the PSTN world-wide and is offered in several device models. Modem data pump and controller functions, traditionally enabled using dedicated hardware, are processed in a Pentium MMX-compatible CPU using host-signal processing modem software which is included in the SoftK56 modem.
GTM-56KM6 User's Guide FEATURES FEATURES • Data modem - ITU-T V.90, K56flex, V.34 (33.6 kbps), V.32 bis, V.32, V.22 bis, V.22, V.23, and V.21; Bell 212A and 103 - V.42 LAPM and MNP 2-4 error correction - V.42 bis and MNP 5 data compression - V.25 ter (Annex A) and EIA/TIA 602 command set • Fax modem - V.17, V.29, V.27 ter, and V.21 ch 2 - EIA/TIA 578 Class 1 and T.31 Class 1.0 commands • System compatibilities - Windows 95, Windows 95 OSR2, Windows 98, Windows NT 4.
GTM-56KM6 User's Guide MODEM INSTALLING THE 2. INSTALLATION 2.1 Installing the Modem Please follow instructions as follows in order to install modem. - Turn off your computer and all attached peripheral devices (printer, monitor, etc.) and unplug them from the electrical outlet. CAUTION: To avoid risk of electric shock, make sure your computer and all peripheral devices are turned off and unplugged. - Remove the cover of your computer.
GTM-56KM6 User's Guide MODEM INSTALLING THE d. If you want to use a telephone on the same line, plug the cord from the telephone into the modem's jack, marked as . - Plug in the power cables for the computer and all peripherals. - Turn ON your computer and verify everything has been reconnected properly. - Install modem driver provided and test your modem according to the following section. WARNING THIS CARD MUST BE USED WITH THE PC SCREW DOWN LID.
GTM-56KM6 User's Guide DRIVER INSTALLATION WIN9X 2.2 Plug and Play Function PnP(Plug and Play) Function is designed to easily install modem by a user not to pay any additional care about difficult network compositions such as jumper setting. The PC and installed cards automatically co-work its way to provide and allocate necessary resources for appropriate networking once the card is plugged into the main board of the computer and the power is on. 2.
GTM-56KM6 User's Guide DRIVER INSTALLATION WIN9X 3. Select and click in the following picture. 4. Select , direct the path of the CD-ROM inserted and click in the following picture.
GTM-56KM6 User's Guide DRIVER INSTALLATION WIN9X 9 Garnet systems
GTM-56KM6 User's Guide DRIVER INSTALLATION WIN9X 5. Click in the following picture. 6. Click to finish the driver installation.
GTM-56KM6 User's Guide - HOW TO VERIFY MODEM 2.4 How to verify the modem is successfully installed 1. You will see the following picture at the last step by clicking the buttons- . At this picture, select the COM Port to which Garnet GTM-56KM6 is set and click button.
GTM-56KM6 User's Guide - HOW TO VERIFY MODEM 2. The following picture showing the appropriate response to each ATI command verifies that the modem is successfully installed and in normal operating condition. Click to finish.
GTM-56KM6 User's Guide DRIVER REMOVAL OF THE MODEM 2.5 Removal of the Modem driver 1. Click the buttons in sequence - .
GTM-56KM6 User's Guide AT COMMAND AND S-REGISTER 2. Select and click button in the following picture to remove the modem driver. 3. MODEM COMMAND AND S-REGISTER *** indicates the factory default setting. 3.1 AT Command A/ A *** B0 Repeat the execution of the previous command line Answer promptly Operate in ITU-T V.21, V.22 Standard Dn Dial “n" ( n = Calling phone no.
GTM-56KM6 User's Guide AT COMMAND AND S-REGISTER P Select Pulse Dialing Sn Dial automatically stored phone no. W Waiting for the tone , Delay in calling L Re-call last phone no.
GTM-56KM6 User's Guide AT COMMAND AND S-REGISTER &Zn=S Save phone no. in the location n of NVRAM(n=0 - 3) &Zn? Display phone no. in the location n &ZL? Display the last executed phone no. 3.2 S-Register The modem is structured to control and manage its operations employing Sregister. Followings are frequently-used functions.
GTM-56KM6 User's Guide 0.1S AT COMMAND AND S-REGISTER S10 1 -255 Carrier Loss Disconnect Time S11 50 -255 0.
