od uc tio n pr re No tf or DR owner’s manual AF T Tracking System P/N 012-01097-00 Receiver P/N 012-01113-00 Transmitter Tracking System Owner's Manual F1 1 1/16/2007 1:51:36 PM
© 2007 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Tel. 913/397.8200 or 800/800.1020 Fax 913/397.8282 Garmin (Europe) Ltd. Garmin Corporation Unit 5, The Quadrangle, Abbey Park No. 68, Jangshu 2nd Road, Shijr, Taipei Industrial Estate, Romsey, SO51 9DL, County, Taiwan U.K. Tel. 886/2.2642.9199 Tel. 44/0870.8501241 Fax 886/2.2642.9099 Fax 44/0870.8501251 All rights reserved.
Introduction > Introduction Thank you for choosing the Garmin® 010-00109700 Receiver/010-01113-00 Transmitter Tracking System. This system uses the proven performance of Garmin GPS and full-featured mapping to create an unsurpassed portable GPS receiver. When the receiver is in communication with the transmitter it becomes a highly accurate tracking device, capable of monitoring up to ten transmitters at a time. Compare the contents of this package with the packing list on the box.
Introduction > Table of Contents Introduction........................................................ i Manual Conventions................................................. i Software License Agreement............................. v Product Registration........................................... v Contact Garmin.........................................................v Caring for the Tracking System...................... viii Cleaning the Cases ..............................................
Introduction > Finding a City.........................................................16 Finding an Interstate Exit.......................................16 Finding an Address.................................................17 Finding an Intersection...........................................17 Searching for a Point of Interest.............................17 Custom Points of Interest.......................................17 Using Tracks......................................................
Introduction > Map Page Setup .....................................................35 Routing Setup.........................................................35 Geocache Setup......................................................36 Marine Setup...........................................................36 Time Setup..............................................................37 Units Setup.............................................................37 Heading Setup...........................................
Introduction > Software License Agreement Product Registration BY USING THE 010-01097-00/010-01113-00 TRACKING SYSTEM, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Help us better support you by completing our online registration today! Have the serial number of your Receiver handy and connect to our Web site (http:// www.garmin.com). Look for the Product Registration link on our Home page.
Introduction > IMPORTANT: READ THIS INFORMATION BEFORE USING YOUR 010-01097-00/010-01113-00 System: Exposure to Radio Frequency Signals—Your wireless handheld tracking system is a low power radio transmitter and receiver. When it is on, it receives and also sends out radio frequency (RF) signals. In August 1996, The Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless radios.
Introduction > Other Medical Devices—If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your radio OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Introduction > Caring for the Tracking System Storage The cases are constructed of high-quality materials and does not require user maintenance except cleaning. Do not store the Tracking System where prolonged exposure to temperature extremes may occur (such as in the trunk of a car) as permanent damage may result. User information, such as waypoints and routes, are retained in the unit’s memory without the need for external power.
Introduction > Warning Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury. When installing the Receiver in a vehicle, place the unit securely so that it does not interfere with vehicle operating controls or obstruct the driver’s view of the road (see diagram). Do not mount where driver’s field of vision is blocked. Do not place unsecured on the vehicle dash. Do not mount in front of an airbag field of deployment.
Introduction > Caution Failure to avoid the following potentially hazardous situations may result in injury or property damage. Use the GPS functionality of the Receiver only as a navigational aid. Do not attempt to use the Receiver for any purpose requiring precise measurement of direction, distance, location, or topography. This product should not be used to determine ground proximity for aircraft navigation.
Getting Started > Getting Started Receiver Overview Radio Receiver Antenna Power key LCD display screen Internal GPS antenna USB External Data/ Auxilary Power Port (under weather cap) Carry lanyard attachment slot Battery compartment locking D-Ring Battery compartment cover Keypad Tracking System Owner’s Manual - Draft Tracking System Owner's Manual F1 1 1/16/2007 1:51:39 PM
Getting Started > Installing the Batteries The Receiver operates on two AA batteries (not included), which are located in the back of the unit. You can use Alkaline or NiMH batteries. See page 67 for information on setting the battery type. 1. Place the loop of the Lanyard through the slot at the at the upper left side on the back of the unit. 2 Route the strap through the loop and pull tight. Belt Clip Button attaches here.
Getting Started > Using the Keypad POWER Key • Press and hold to turn the unit on or off. • Press and release to adjust the backlighting. IN/OUT Zoom Keys • Press to zoom in or out on the Map Page. • Press to scroll up or down a list on any other page. Track Key • Press and release at any time to view the Tracker Page. MARK Key • Press and release at any time to mark your current location.
Getting Started > Transmitter Overview Radio Transmitter Antenna Charging the Transmitter battery The Transmitter operates on a rechargeable Lithiumion battery, which is located in the unit. The battery can be charged using either the AC or DC charging accessory. The battery has been partially charged at the factory, but should be fully charged before use. To charge the battery: 1. Insert the small plug on the charger into the charging port on the Transmitter. 2.
Getting Started > Turning on the Receiver Adjusting the Backlight When the Receiver is turned on, the Introduction Page appears, followed by the Satellite Page. The unit must collect satellite data and establish its current location. You may want to adjust the backlight to see the display better. To turn the Receiver on and off: 1. Press and hold the POWER key. When the unit turns on, a tone sounds and the Introduction Page appears, followed by the Satellite Page. 2.
Getting Started > Initializing the GPS Receiver The first time you turn on your Receiver, the GPS receiver must collect satellite data and establish its current location. To ensure proper initialization, the GPS receiver is shipped from the factory in AutoLocate mode, which allows the receiver to “find itself” anywhere on Earth. To receive satellite signals, you must be outdoors and have a clear view of the sky. To initialize your Receiver: 1. Press and hold the POWER key to turn on the Receiver. 2.
Getting Started > Using the Receiver This section explains how to enter and select information with the Receiver. Understanding Terms As you progress through this owner’s manual, you are directed to press a specific key or highlight a field on the screen. When you are directed to press a key, you should press and quickly release the key. A key may need to be held down for a period of time to start a secondary function, when the instructions tell you to, do so.
Getting Started > Selecting Options and Entering Data To enter data and select options, use the ROCKER to highlight, select, or choose an item in a list or a field on the screen. To select and activate an option: 1. From any page, press MENU. An Options Menu appears with a list of additional options for that page. 2. Use the ROCKER to move the highlight up, down, right, or left on the menu to highlight the option you want, and press ENTER to select it.
Getting Started > On-Screen Messages When a significant event in the operation of the unit occurs, an on-screen message appears to advise you of the occurrence. In each case the condition is described and often a remedy provided. Press ENTER to acknowledge the message and close the window. On-Screen Messages In some instances the message may indicate a temporary condition such as the “Calculating Route” message and close as soon as calculation is completed.
Getting Started > Transferring Data to a microSD Card Some units are equipped with a pre-installed microSD card. To install or remove the microSD card: 1. Remove the Battery Compartment Cover from the back of the unit and remove the two batteries. 2. Locate the card tray at the center of the battery tray and check to be certain the card is installed in the tray. 3. If you desire to remove the card, slide the tray cover up, then lift it toward you to remove the card from the tray. 4.
Basic Operation > Overview of the Main Pages The Receiver has three main pages: the Home Page (Main Menu), the Map Page and the Tracker Page. You can cycle through these pages by pressing the Back key. An Active Route Page appears only when you are navigating a route. Each page (except the Home Page) has an options menu, which contains the page setup options and features that apply to that page.
Basic Operation > The Setup Menu This Setup Menu provides a method for customizing the Tracking System to meet your personal needs. You can setup the System, Display, Alert Tones, the page sequence, the Map Page, Routes, Time, Units of Measure, etc. The Navigation Utilities Page This page allows to access utilities used to enhance navigation capabilities. They include; Trip Computer, Compass, Altimeter, Tracks, Routes, Highway, Proximity Alarms, Turn Previews, and Active Routes.
Basic Operation > The Tracker Page The Tracker Page provides distance and direction information for each transmitter being tracked. Up to three transmitters can be displayed on the Tracker page at one time with a compass indicating the direction of each and a scrollable list indicating the distance from the receiver. The first time you use the Receiver and Transmitter together you must setup the Tracker Page. The Tracking System uses a low-power, 2.4 GHz, wireless link for short range (approx.
Basic Operation > GPS Operation This section explains some of the more common operations you can perform with your Receiver including creating and using waypoints, using the Find Menu, and how to create and use tracks and routes. Creating and Using Waypoints Waypoints are locations or landmarks you record and store in your GPS. They are locations you might want to return to later. You can add waypoints to routes and even create a Go To directly to the selected waypoint.
Basic Operation > Note: You must have a GPS Satellite fix before you can average a waypoint’s location. You cannot average a waypoint after it has been saved to the waypoints list and Mark Waypoint page closed. press ENTER to mark it as a waypoint. Continue placing boundary markers (waypoints) until you have defined a perimeter. Use the Set Proximity option from each waypoint to activate the boundary alarm.
Basic Operation > Recent Finds The Recent Finds Page shows a list of the last 50 items you have searched for or gone to recently. Using the Find Item Information Page When you select an item from the Find item list and press ENTER, an information page shows detailed information about the item. Each information page contains three on-screen buttons. Different buttons appear depending on whether you are selecting a Find item to navigate to or adding a Find item to a route list.
Basic Operation > Finding an Address If you downloaded detailed mapping data, use the Addresses icon on the Find Menu to find an address. When you enter the street number, street name, and city, the find feature matches that data with addresses in the map database. Finding an Intersection If you downloaded detailed mapping data, use the Intersections icon on the Find Menu to search for an intersection.
Basic Operation > Track Profiles After you save a track, you have a record of the path you traveled and a track altitude profile. You can create a Track Elevation Profile from Digital Elevation Models (DEM) maps (MapSource U.S. Topo 24K), which include elevation data contained in the map. When these types of maps are available, a Use Map Data - Use Track Data option menu appears when you select Profile. Refer to the Garmin Web site, www.garmin.
Basic Operation > Page, the Receiver creates a route composed of several user waypoints or Find Menu items, with the last being your destination. It navigates directly from point to point. Before each turn in the route, a turn page shows a guidance message and graphic of the turn. You can view the turns at any time by pressing up or down on the ROCKER while the route is active. • Both navigation methods change when you select the Follow Roads option on the Routing Setup Page.
Main Pages > Using the Route Page Options The Route Page shows all points stored in memory for the route selected on the Routes Page. Press MENU to open the Route Page Options Menu. • Remove All—removes all waypoints from the saved route. • Route—reverses the order of the route points in the saved route. • Profile—creates a vertical profile of the route when MapSource U.S. Topo 24k map data is used. • Copy Route—makes a copy of the saved route with the same name followed by a number.
Main Pages > Using the Satellite Page Options Menu- using MapSource or BlueChart data. Press MENU to open the Options Menu. Use With GPS Off/On—enables you to turn the GPS receiver on or off. Two map operating modes, position mode and pan mode, determine what cartography is shown on the map display. Position mode pans the map to keep your present location in the display area. The position marker shows your travel on the Map Page.
Main Pages > You can add and configure up to four optional data fields to the top of the page to provide a variety of travel and navigational information. Using Additional Map Data Optional MapSource mapping data disks enhance the versatility of your Tracking System. With MapSource data, you can view listings of nearby restaurants, lodging, shopping centers, attractions, and entertainment, and you can retrieve addresses and phone numbers for any listed location.
Main Pages > Map Orientation There are two map orientation options: North Up orients the map like a paper map. Track Up orients the map in the direction of travel. When using Track Up, the North arrow indicates the orientation. Set the map orientation using the Setup Map option. • • Map Page Options Use the Map Page Options Menu to customize the Map Page. With the Map Page open, press MENU. To select an option, highlight it, and press ENTER.
Main Pages > If you select Always Show, a guidance message always appears whether or not you are navigating. If you select Show When Navigating, a guidance message appears until you select Stop Navigation from the Options Menu. Setting up the Map Page Use the Setup Map option to adjust how items are shown on the Map Page. Map Setup – General Page The Map Setup – General Page contains the settings for Orientation, Below, Auto Zoom, Detail, and Lock On Road. • Orientation—selects how the map is shown.
Main Pages > Map Setup – Points Page Us the Map Setup – Points Page to set the map scale at which Map Points, User Waypoints, Street Label, and Land Cover appear on the Map Page. Select Auto, Off, or a specific zoom level. Map Setup – Text Page Use the Map Setup – Text Page to select the text size for descriptions of map items on the Map Page. You can select from None, Small, Medium, or Large.
Main Pages > Restoring Defaults Use the Restore Defaults option to return the map settings to factory settings. Compass Page During active navigation, the Compass Page guides you to your destination with a graphic compass display and a bearing or course pointer. When navigating, the Compass Page provides navigation data and directions.
Main Pages > To turn the electronic compass on or off: 1. Press and hold the PAGE key to turn the electronic compass on or off. The Compass Icon appears in the status bar when the electronic compass is on. When you are not using the electronic compass, turn it off to conserve batteries. When it is turned off, the unit uses the GPS receiver for navigation. 2. Hold the Receiver level to get an accurate electronic compass reading. You can obtain the most accurate reading if it is calibrated.
Main Pages > Sight ‘N Go Navigation Sight ‘N Go allows you to set a course to a point you can see in the distance. Using the Course Pointer or Bearing Pointer The bearing pointer and course pointer work independently of each other. The bearing pointer indicates the direction to your destination, and the course pointer indicates your relationship to a course line leading to the destination. If the bearing pointer arrow is pointing straight up, for example, you are going directly to your destination.
Main Pages > You can configure the Profile field in the center of the page to show either elevation or ambient pressure plots as selected from the Altimeter Page Options Menu. Data fields at the top of the page are user selectable and show a variety of recorded or current data. Altimeter Page Options Use the Altimeter Page Options Menu to customize the Altimeter Page. With the Altimeter Page open, press MENU to open the Options Menu.
Main Pages > Plot to view a record of changes in barometric pressure for a set period of time. When one option is active, the other option is shown on the Options Menu. profile. When the red vertical and horizontal cross hairs are stopped at a location along the profile, the screen shows the elevation or pressure, time of day, and date when the point was recorded. Zoom Ranges View Points on Map You can set the zoom ranges for elevation, distance, or time when you show the View Elevation Plot.
Main Pages > Trip Computer Page The Trip Computer Page provides you with a wide variety of travel data that can be useful when navigating a long distance. It indicates your current speed, average speed, trip odometer, and many other helpful statistics useful for navigation. You can customize the trip computer screen to meet your personal requirements. Selecting the type of data to display is done in the same manner as for the similar data fields on the Map Page. (See page 40 for details.
Main Menu > Main Menu The Main Menu contains settings and features not found on the main pages and sub-menus. The time and date are shown at the bottom of this page. The Main Menu is accessible from any page by pressing MENU twice. To select an item on the Main Menu, highlight the menu item, and press ENTER. NOTE: If a page from the menu is added to the Main Page sequence, the icon does not appear on the Main Menu. (See page sequence setup).
Main Menu > Route Page Use the Routes page to create a route to a destination. For more information, see Routes on page 32. Setup Menu Page Use the Setup Menu Page to customize your Receiver to your personal preferences. Each feature is explained in the following pages. Highway Page When navigating a route, the Highway Page guides you to the destination using data fields and a graphic highway.
Main Menu > Off) when external power is removed from the unit. • Proximity Alarms—indicates whether custom points of interest (POI’s) proximity alarms are on or off. System Setup Menu The System Setup Menu contains Restore Defaults and Software Version. Use Restore Defaults to return the System Setup fields to their original values. Software Version shows the software version and unit identification number.
Main Menu > • TEXT OUT—allows ASCII text output of location and velocity information. No input. • NONE—provides no interfacing capabilities. If you select NMEA In/NMEA Out or Text Out, additional fields appear. The baud rate for NMEA In/NMEA Out is locked at 4800. If selecting Text Out highlight the Baud Rate field, and press ENTER. Use the ROCKER key to highlight the desired setting and press ENTER. USB Mass Storage—allows the microSD card to be used as a USB Mass Storage device.
Main Menu > Faster Time—calculates routes that are faster to drive but might be longer in distance. Shorter Distance—calculates routes that are shorter in distance but take more time to drive. • Next Turn Pop-up—turns the Next Turn popup window on or off. Follow Road Options • Off Route Recalculation—allows you to set whether the unit prompts you when it is recalculating your route (Prompted) or recalculates automatically or Off.
Main Menu > • Off Course Alarm—sets an alarm to sound when you are off your chosen course. • Deep Water Alarm/Shallow Water Alarm— sets an alarm to sound when you enter an area of water that is too deep or too shallow. Time Setup Use the Time Setup Page to set the time format and zone and to set the unit to conform to Daylight Saving Time. The time and date appear at the base of the page. • Time Format—sets 12 or 24 hour format.
Main Menu > Heading Setup Altimeter Setup Use the Heading Setup Page to specify the type of heading display and the type of North reference used to calculate your heading. The Altimeter Setup Page allows you to setup the altimeter to self-calibrate each time you turn on the unit, to function as a barometer, or to manually calibrate when you have accurate elevation or pressure data.
Main Menu > Jumpmaster Jumpmaster is an accessory designed for experienced skydivers. A jumpmaster is the individual in charge of a group of skydivers coordinating a group or cargo drop. A list of abbreviations and acronyms for Jumpmaster settings can be found on page 81. The Jumpmaster follows military guidelines for calculating a jumpmaster’s high altitude release point (HARP).
Main Menu > The following is a list of abbreviations and acronyms commonly used and relate specifically to this feature: K values—defines the wind drag values for parachutes. AGL—(Above Ground Level) indicates the altitude measurement. HAHO—(High Altitude High Opening) describes a type of jump. CD—(Canopy Drift) measured while the parachute is open. HALO—(High Altitude Low Opening) describes a type of jump. DIP—(Desired Impact Point) describes the location where landing should occur.
Main Menu > Proximity Waypoints Stopwatch Use the Proximity Waypoints Page to define an alarm circle around a stored waypoint location. The alarm circle can help you avoid restricted locations. Select the Stopwatch icon to use the Receiver as a stopwatch, which includes a lap timer. You can also have the unit record the lap time based on distance. For more information on proximity waypoints, see the “Proximity Waypoints” section on page 15.
Main Menu > Appendix Appendix Hunt and Fish The Hunt and Fish Tables provide you with a listing of predicted best times for hunting and fishing for a chosen date and location. Radio Receiver Specifications Games Menu Size: 6.1" H x 2.4" W x 1.3" D Weight: 7.5 ounces (213 g) w/batteries installed. The Games Menu contains six games (Memory Race, Virtua Maze, GekoSmak, Nibbons, Gekoids, and Beast Hunt) for entertainment. Some games use GPS as a virtual component during play. Display:1.5" W x 2.
Appendix > Power Source: Two 1.5 volt AA batteries, USB Data Cable, 12 Volt DC Adapter Cable Battery Life: Up to 18 hours (typical use)* *Alkaline batteries lose a significant amount of their capacity as the temperature decreases. Use Lithium batteries when operating the Receiver in below-freezing conditions. Extensive use of screen backlighting, electronic compass, and audible tones significantly reduce battery life. Radio Transmitter Specifications Physical Size: 1.5" H x 3.5" W x 1.
Appendix > Interfacing USB port under weather cover The following formats are supported for connection of external devices. Garmin Proprietary Sentences—PGRME (estimated error), PGRMM (datum string), and PGRMZ (altitude). The NMEA 0183 version 3.01 interface format is supported by the Receiver and enables the unit to drive up to three NMEA devices. The following are the sentences for NMEA 0183, version 3.
Appendix > Data Field Definitions The following list provides a brief definition of each data field option. Accuracy Of GPS—the current accuracy of your GPSdetermined location. Ambient Pressure—the uncalibrated current pressure. Ascent - Average—the average vertical distance of ascent. Ascent - Maximum—the maximum rate in feet per minute. Ascent - Total—the total distance ascended. Barometer—the calibrated current pressure. Bearing—the compass direction from your current position to a destination point.
Appendix > Off Course—the distance off your direct course line. Pointer—the arrow that indicates the direction to travel to the next point on a route. Speed—your current vehicle speed measured in miles per hour, kilometers per hour, or knots. Trip Time - Moving—the length of time your vehicle has been in motion, since the trip computer was reset.
Appendix > Optional Accessories Several optional accessories are available to enhance the operation of the Tracking System. To obtain replacement parts and optional accessories, contact your Garmin Dealer, or Garmin Product Support in the U.S.A. at 800/800.1020, or Garmin Europe at 44/0870.8501241. Warning: Garmin accessories are designed and tested specifically for use with Garmin products. Accessories offered by other manufacturers have not been tested or approved for use with Garmin products.
Appendix > Connecting Your Receiver to a Computer You can connect your Receiver to your computer using either a serial port or USB connector cable. Note: Fully install the supplied MapSource Trip & Waypoint Manager software on your computer before connecting the USB cable to the computer. Follow the instructions for installation and operation provided with the software. To connect your Receiver to your computer: 1.
Appendix > What Is WAAS/EGNOS? The Wide Area Augmentation System (WAAS) is an FAA funded service to improve the overall integrity of the GPS signal for users in North America. The European Geostationary Navigation Overlay Service (EGNOS) is the European version of WAAS and operates in the same manner. WAAS is made up of satellites and ground reference stations positioned across the United States that monitor GPS satellite data.
appendIx > Map Datums and Location Formats of those commonly used. If you are navigating and comparing the GPS coordinates to a map, chart, or other reference, set the map datum in the GPS unit to the same datum as the map to ensure the most accurate navigation. What Is a Location Format? Map Datums are based on a mathematical model of the Earth.
Appendix > FCC Compliance This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions.
Appendix > Limited Warranty This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Garmin will at its sole option repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost.
Appendix > Garmin International, Inc. 1200 E 151st Street, Olathe, Kansas 66062 U.S.A. Tel. 913/397.8200 Fax. 913/397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL U.K. Tel. 44/0870.8501241 Fax 44/0870.8501251 Online Auction Purchases: Products sold through online auctions are not eligible for rebates or other special offers from Garmin. Online auction confirmations are not accepted for warranty verification.
Index Index A accessories 46 altimeter 28–32 altimeter page 28 calibration 30 data fields 30 options menu 29 pressure/elevation plots 29 reset options 30 view points 30 zoom ranges 30 altitude 28–32 appendix 43 compass calibration 27 compass page 26 electronic compass 26 options menu 27 Course Deviation Indicator (CDI) 28 course pointer 28 creating and using waypoints 14 creating a waypoint using coordinates 14 creating waypoints using the map 14 B D backlight 5 battery installation 2, 4 bearing pointe
Index marine setup 36 N page sequence setup 35 north up/track up 21 system setup 33 O time setup 37 on-screen messages 9 tones setup 35 units setup 37 P sun and moon 41 PAGE/COMPASS key 3 tracks page 32 page sequence setup 35 main pages 20 POWER key 3, 5 manual conventions i pressure plots, view 29 MapSource 48 product registration v map datums 50 profile field 29 map page 21 proximity waypoints 41 additional map data 22 declutter 25 Q options menu 23 QUIT key 3 orientation 23 setup 24 R zoom range 22 ROCK
Tracking System Owner's Manual F56 56 1/16/2007 1:51:50 PM
Tracking System Owner's Manual F57 57 1/16/2007 1:51:51 PM
For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. © 2007 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K. Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan www.garmin.
