530 2-way radio & personal navigator ® owner’s manual PRELIMINARY Rino520_530_prelim.
© Copyright 2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street Olathe, Kansas 66062, U.S.A. Tel. 913/397.8200 or 800/800.1020 Fax 913/397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle Abbey Park Industrial Estate Romsey, SO51 9DL, U.K. Tel. 44/0870.8501241 Fax 44/0870.8501251 Garmin Corporation No. 68, Jangshu 2nd Road Shijr, Taipei County, Taiwan Tel. 886/2.2642.9199 Fax 886/2.2642.9099 All rights reserved.
P R E L I M I N A R Y INTRODUCTION Thank you for choosing the Garmin® Rino® 530 (Radio Integrated with Navigation for the Outdoors). To get the most from your new Rino 530, read through the Quick Start Guide first, then this Owner’s Manual to understand all of the operating features. The Quick Start Guide describes the process of navigating the Main Pages and the Option Menus, along with some basic unit operations to familiarize you with your new Rino 530 right out of the box.
P R E L I M I N A R Y INTRODUCTION > TABLE OF CONTENTS Introduction.............................................................i Getting to Know Your Rino 530 ............................1 Front of the Rino 530 ............................................... 2 Back of the Rino 530 ................................................ 3 Main Display Pages .................................................. 4 Operating the Rino 530 ............................................ 5 Status Bar Overview ..............
P R E L I M I N A R IY NTRODUCTION Programming Data Fields ............................................ 41 Trip Computer Page ............................................... 42 Trip Computer Page Options ....................................... 42 Main Menu Page ..................................................... 43 Using the Main Menu .................................................. 43 Main Menu Options ..................................................... 45 Shortcuts Menu ...........................
P R E L I M I N A R Y INTRODUCTION > TABLE OF CONTENTS System Setup Page....................................................... 87 Calendar .................................................................. 88 Alarm Clock ............................................................ 90 Calculator ................................................................ 91 Stopwatch ............................................................... 92 Stopwatch Lap Options ..............................................
P R E L I M I NG A S R >YG ETTING GETTING TO KNOW YOUR RINO 530 The Rino 530 (Radio Integrated with Navigation for the Outdoors) is a 7.6 ounce, 12 channel GPS-enabled handheld device. It has integrated radio functionality to provide two-way communications for up to two miles using 14 FRS (Family Radio Service) channels. The Rino 530 also provides 8 high-performance GMRS (General Mobile Radio Service) channels and 8 GMRS repeater channels (U.S. versions only) for up to five miles.
P R E L I M I N A R Y GETTING STARTED > FRONT OF THE RINO 530 Front of the Rino 530 LCD Display Power button: • Press and hold to turn the unit On/Off • Press to adjust contrast and backlighting Call button: • Press to send out Call Tone • Sends position when released (if enabled) Talk button: • Press and hold to talk • Sends position when released (if enabled) Page/Quit button: • Press to cycle through main pages • Used to quit or escape menu items Volume (V) button: • Press to open volume contr
P R E L I M I N A GR YS ETTING TARTED > BACK OF THE RINO 530 Back of the Rino 530 2-way FRS/GMRS Antenna GPS Antenna Belt Clip Connector Mount External Power And Data Connector with Weather cap Headset Connector with Weather cap Battery Compartment D-Ring Battery Compartment Cover Mount Alignment Notches Rino 530 Owner’s Manual ® Rino520_530_prelim.
P R E L I M I N A R Y GETTING STARTED > MAIN DISPLAY PAGES Main Display Pages All of the information you need to operate the Rino 530 can be found on six default main pages (or display screens). Simply press and release the Page button to cycle through the Radio Page, Map Page, Navigation Page, Altimeter Page, Trip Computer, and Main Menu Page. You can also access the Main Pages by pressing the on-screen Main Page button . Customize the Main Page sequence through the Main Menu (see page 45).
P R E L I M I N A G R SY ETTING TARTED > OPERATING THE RINO 530 Operating the Rino 530 To use the page Option Menu: For best results, you should initialize the GPS receiver in your Rino 530 unit before you use it the first time. See page 7 for instructions on initializing the unit. For most accurate results, the compass and altimeter should also be calibrated. Refer to the “Calibrating the Compass” and “Calibrating the Altimeter” sections for complete information. 1.
P R E L I M I N A R Y GETTING STARTED > STATUS BAR OVERVIEW Status Bar Overview The Status Bar at the top of the screen displays on all the available Main Pages. As you move around any of the Main Pages, the current page’s title briefly displays (3 seconds) and then is replaced by the Status Bar. The current settings and operational icons on the Status Bar are displayed as you operate the unit.
P R E L I M I N A R Y UNIT OPERATION Radio Page The Radio Page is the first of the default Main Pages. This page provides the user interface for FRS (Family Radio Service) and GMRS (General Mobile Radio Service) radio operations. Garmin Rino units work with 3rd party FRS/GMRS radios, provided the other radios use standard FRS/GMRS frequencies. To take full advantage of the Rino features, communicate with other Rino users.
UNIT OPERATION > RADIO PAGE P R E L I M I N A R Y To initialize the unit: 1. Take the Rino 530 outside where it has an unobstructed view of the sky and turn it on. 2. The unit begins to search for satellite signals. “Tracking Satellites” is displayed while the unit is initializing. 3. Initialization should take no more than five minutes. When the GPS is initialized and ready for navigation, the message “3D Accuracy” is displayed on the Radio Page.
P R E L I M I N A R Y Entering a name with the on-screen keyboard 4. When you have entered your new ID, use the Thumb Stick to highlight OK and then press the Thumb Stick In. To change the user symbol: 1. Using the Thumb Stick, highlight the face symbol to the right of the My ID field. Press the Thumb Stick In to show a list of available face icons. 2. Move the Thumb Stick Up or Down to scroll through the selections.
UNIT OPERATION > RADIO PAGE P R E L I M I N A R Y Setting the Channel and Squelch Code The Rino 530 has a total of 22 channels (not including GMRS repeater channels) and 38 squelch codes to select from using the Channel and Code fields. Channels 1–7 and 15-22 GMRS channels, 8-14 are FRS channels, and 15R–22R are for GMRS repeater channels (repeater channels are available U.S. units only and are disabled by default).
P R E L I M I N A R Y UNIT OPERATION > RADIO PAGE Setting the squelch code to 0 (squelch code off) allows you to hear all activity on the selected channel, but you must be set to the same squelch code as the other person(s) to transmit back. See the “Appendix” for a table listing all of the 38 Squelch Codes and their frequencies. As you change the main channels, the Rino 530 remembers the last channel/squelch code combination that you were using.
UNIT OPERATION > RADIO PAGE P R E L I M I N A R Y Scanning and Monitoring The Scan option allows you to scan through the available channels for voice activity. As the unit scans and receives a signal (or if you transmit), it stops on that channel/squelch code for a few seconds, then continues scanning. When the Rino 530 is scanning and it receives an incoming signal, the Rino 530 automatically decodes the Squelch Code used by the incoming signal.
P R E L I M I N A R Y UNIT OPERATION > RADIO PAGE 4. To Scan Current Codes, highlight the Option Menu and press the Thumb Stick In. Choose the desired setting and press the Thumb Stick In. The Code field is blank when the unit is scanning or monitoring channels. To setup a Scanlist: 1. Using the Thumb Stick, highlight the Option Menu on-screen button and press In. Highlight Setup Scanlist and press the Thumb Stick In. 2.
UNIT OPERATION > RADIO PAGE P R E L I M I N A R Y Radio Page Option Menu The Radio Page Option Menu allows you to customize aspects of your Rino 530, such as setting up the radio, programming call and ring tones, and setting up a scanlist. Setup Radio The Setup Radio option displays the Radio Setup Page. This page determines how the radio functions and enables you to adjust the radio operation to your needs. The following options are available: Radio Page Option Menu 14 Rino520_530_prelim.
P R E L I M I N A R Y NOTE: When Scramble is set to On, in order for peer-to-peer and Send Location features to work, the receiving radio must have Scramble enabled also. GMRS Radio—Use this option to turn On/Off GMRS channels 15–22. When you turn GMRS channels off, channels 15–22 will be disabled and channels 1–7 will become FRS channels (GMRS interstitial). Remember, you must obtain a license to operate GMRS channels in the U.S.
UNIT OPERATION > RADIO PAGE P R E L I M I N A R Y Setup Tones Call Tone—When the Call button is pressed, an attention tone is transmitted. This option allows you to choose one of ten tones. Roger Tone—When the Talk button is released, a tone is sent to signify the end of the transmission. This option allows you to choose one of four tones, or set the tone to Off. Ring Tone—When an incoming transmission is received, an attention tone will sound.
P R E L I M I N A R Y Use Weather Radio The Weather Radio provides a constant update of the weather conditions, which is helpful while outdoors or planning a road trip. The Weather Alert further enhances the Weather Radio by automatically broadcasting any weather alerts if you are not actively transmitting or receiving on the radio. Select the Radio Page Option Menu button . Press the Thumb Stick In when Use Weather Radio is highlighted to turn on the weather radio.
UNIT OPERATION > RADIO PAGE P R E L I M I N A R Y When a Weather Alert tone is detected, the Rino 530 automatically turns on the Weather Radio and broadcasts the Weather Alert if you are not actively transmitting or receiving on the radio. The volume changes to 3/4 the maximum when a Weather Alert is broadcast. Select Disable Weather Alert to turn off this feature. To turn the weather radio off, press the Thumb Stick In when Use FRS/GMRS Radio is highlighted.
P R E L I M I N A R Y UNIT OPERATION > RADIO PAGE Mark Waypoint’s Indicators The Mark Waypoint figure displays several different icons, depending on what you are doing. See the following illustrations for more information. GPS and FRS/GMRS Radio On; Ready to transmit Position GPS and FRS/GMRS Radio On; Ready to transmit Position; Receiving transmission GPS and Weather Radio On (FRS/GMRS Radio Off) GPS and FRS/GMRS Radio On; Ready to transmit Position; Activity on channel.
P R E L I M I N A R Y UNIT OPERATION > USING THE RINO 530 RADIO FEATURES Using the Rino 530 Radio Features Your Rino 530 unit provides many features to enhance your radio experience, such as transmitting your location or any location and receiving contact information. This section reviews some of the advanced radio features. Refer to the “Features” section for information on all of the features of the Rino 530.
P R E L I M I UN OA R> UY NIT The Rino 530 can manage up to 50 contacts at any time. Each time you receive a signal from a contact, your map is updated showing their new position. A Track Log of their movement is created and shown on your map (see the “Track Logs” section). After a contact has been established, a “ Updated” message briefly appears at the bottom of your display each time the contact updates.
P R E L I M I N A R Y UNIT OPERATION > USING THE RINO 530 RADIO FEATURES To review a contact and contact details: 1. From the Map Page, highlight the desired contact on the Contact Bar and press the Thumb Stick In. As you highlight the contacts on the Contact Bar, the Map page centers the map on that contact and display its name, direction and distance near the top of the screen. Or 1. Press the Thumb Stick In and hold it until the Shortcuts Menu is displayed.
P R E L I M I UN OA R> UY NIT Sending a Location Another feature is the ability to send a specific location to other Rino users. This comes in handy when you are trying to round-up the group or you just want to meet at a specific location. You may send any point found from the Find ‘N Go menu. If the unit needs to wait until 30 seconds have elapsed since the last position transmission, a “Waiting to send location...” message appears until the unit is able to transmit.
UNIT OPERATION > MAP PAGE P R E L I M I N A R Y Map Page The Map Page displays your present position and direction of movement using a triangular Position Icon that is centered on the map. As you travel the map display leaves a “trail” (track log) of your movements. The map displays geographic details such as rivers, lakes, highways, and towns. The map can display a higher level of detail than the basemap provided with the unit (i.e. residential streets, parks, etc.
P R E L I M I N A R Y To view a Contact from the Map Page: 1. Highlight the Contact icon using the Thumb Stick. As you highlight the contacts on the Contact Bar, the Map page centers the map on that contact and displays its name, direction, and distance near the top of the screen. 2. Press the Thumb Stick In to view the details of the Contact. 3. Press the Thumb Stick to the Left or Right to recenter the map on your current position. The scale can be changed from 20 feet to 500 miles.
UNIT OPERATION > MAP PAGE P R E L I M I N A R Y Map Page Options Map Page options allow a variety of operating and custom features for your Rino 530. The Map Page options are: Highlight an option then press the Thumb Stick In to select. Show...—Allows you to choose to show either the Contact Bar, four programmable Data Fields or show the Map Only. Choosing either Contact Bar or Data Fields reduces the map area.
P R E L I M I N A R Y Using the Pan Map Option The Map Page pan function allows you to display an arrow used to point at and identify items on the map, and to move the map in order to view areas beyond the current viewing area on the display. The map panning function is activated from the Option Menu on the Map Page. Use the Thumb Stick to move the panning arrow (also referred to as the map pointer) in the desired direction.
UNIT OPERATION > MAP PAGE P R E L I M I N A R Y Programming the Data Fields Select Show... Data Fields to view four optional Data Fields on the right side of the screen that can be programmed to provide a variety of travel and navigation information. A list of the choices is shown to the right. Not all data types are available on every page. To program a data field: 1. Use the Thumb Stick to highlight the data field and then press In to display the list of data options. 2.
P R E L I M I N A R Y Setting up the Map The Setup Map option displays the five Map Setup Pages, each accessed by an on-screen button. Setup Items Options Sub-Page Buttons General Setup Lines Setup Points Setup Text Setup Map Data Setup UNIT OPERATION > MAP PAGE 3. Press Left, then Up or Down on the Thumb Stick to highlight an item on the list. Press Right to return to the sub-page buttons. 5. Use the Thumb Stick to highlight the desired option and then press it In to activate. 6.
UNIT OPERATION > MAP PAGE P R E L I M I N A R Y General Setup Orientation—Track Up or North Up; fixes the top of the map display to the current track heading or to a north heading. Auto Zoom—On or Off; automatically scales the map to display both your current location and the next point to which you are navigating. Detail—Most, More, Normal, Less, or Least; controls how much map detail you see. This setting only applies to a map feature set to Auto.
P R E L I M I N A R Y Text Setup Points of Interest, Waypoints, Street Label, and Land Cover—None, Small, Medium, or Large; control the screen size of the name. Map Data Setup Show—Check box; check mark determines if map data is used or not. Option Menu allows you to choose to show all, show none, or show specific MapSource Data. See also the “Appendix.” UNIT OPERATION > MAP PAGE 2. Use the Thumb Stick to move about on the Map Page until you reach the point to which you want to measure.
P R E L I M I N A R Y UNIT OPERATION > NAVIGATION PAGE Navigation Page The Navigation Page provides active guidance with a rotating compass ring that shows your course (track) while you are moving and a bearing pointer to indicate the current direction to your destination (bearing) relative to the course. The Data Field at the top of the page, by default shows you the name of your destination. All five Data Fields can be programmed to display a variety of navigation data.
P R E L I M I N A R Y U NIT While you are navigating a route, the pointer indicates the direction (a bent arrow) of the turn to the next point in the route as well as the direction to the current point when you get within 15 seconds Estimated Time of Arrival of the current point. For example, if the arrow is pointing straight up, you are going directly to your destination.
P R E L I M I N A R Y UNIT OPERATION > NAVIGATION PAGE Navigation Page Options Sight ‘N Go—Use the Sight ‘N Go feature to locate a landmark visually and then lock in a magnetic heading to it. Stop Navigation—Cancels navigation (“Grayed out” or disabled unless you are navigating on a Goto, Track, or Route.
P R E L I M I N A R Y U NIT Using Sight ‘N Go OPERATION > NAVIGATION PAGE Sighting Marks To use Sight ‘N Go to navigate: 1. Use the Page button to access the Navigation Page and then use the Thumb Stick to access the Option Menu . 2. Use the Thumb Stick to highlight Sight ‘N Go and press In. Note that the compass ring with pointer is in-line with the two sighting marks on the case. 3. Hold the Rino 530 at eye level and line up the two sighting marks on the case with the distant object.
P R E L I M I N A R Y UNIT OPERATION > NAVIGATION PAGE To calibrate the Electronic Compass: 1. Use the Page button to access the Navigation Page. 2. Use the Thumb Stick to highlight the Option Menu on-screen button and press In. 3. Highlight the Calibrate Compass option and press the Thumb Stick In. 4. Press the Thumb Stick to activate the Start button and then follow on-screen directions for holding and turning the unit. Hold the unit level when calibrating the compass.
P R E L I M I N A R YU NIT Altimeter Page The Altimeter Page provides the current elevation, rate of ascent/descent, a profile of elevation changes over distance or time, or a profile of pressure changes over time. The Altimeter Page’s Option Menu allows you to select from a variety of display options such as plotting over time, plotting over distance, displaying the zoom ranges of measurement, viewing elevation or pressure points, and resetting data displays.
P R E L I M I N A R Y UNIT OPERATION > ALTIMETER PAGE Altimeter Page Options The Altimeter Page Option Menu allows you to select the type of information and how it is to be displayed. Altimeter Page Options include: Plot Over Time/Distance—Plots the changes in elevation or pressure over a length of time or over a distance. When Plot Over Distance is selected, Plot over Time is displayed in the Option Menu (and vice versa).
P R E L I M I N A R YU NIT Viewing Pressure/Elevation Plots When selecting the View Elevation Plot option, you can plot a profile of elevation changes that occur as you navigate over a set distance or period of time. When you select View Pressure Plot, you can view a record of changes in barometric pressure for a set period of time. When one option is active the other displays on the Altimeter Page Option Menu . To view elevation or pressure plots: 1.
P R E L I M I N A R Y UNIT OPERATION > ALTIMETER PAGE Viewing Points The View Points option allows you to scroll through the stored elevation profile and to view a single point along the profile. When the pointer is stopped at a location along the profile, the display shows the elevation, time of day and date the point was created. As the profile moves past the pointer, the status window at the top of page changes to display the date, time, and altitude for the point beneath the pointer.
P R E L I M I N A R YU NIT Calibrating the Altimeter Because the Rino 530 relies on the Barometric pressure to determine the elevation and the pressure at any given elevation can fluctuate, you can calibrate the altimeter to increase its accuracy. You must know the elevation or pressure at your current location, information you can obtain from a map or other reliable source. To manually calibrate the altimeter: 1. Use the Thumb Stick to access the Option Menu. 2.
P R E L I M I N A R Y UNIT OPERATION > TRIP COMPUTER PAGE Trip Computer Page The Trip Computer Page by default displays up to seven different types of navigation data. Choosing Big Numbers will display 2 large data fields. By selecting the information options that you prefer and arranging them in a desired order on the page, you can customize the Trip Computer Page to meet your navigation needs.
P R E L I M I N A R UY NIT Main Menu Page The Main Menu provides access to additional Rino 530 feature pages. The pages listed below provide enhancements to Rino 530 operation. Press the Page button repeatedly to cycle to the Main Menu or select it from the Main Page Menu at the top of each main page. OPERATION > MAIN MENU PAGE Mark Waypoint Page—Allows you to mark and store a waypoint for your current location or a map pointer location.
P R E L I M I N A R Y UNIT OPERATION > MAIN MENU PAGE Setup Page—Allows tailoring of items such as time format, units of measure, display backlighting timeout and contrast adjustment, heading selection, interface setups, and system software information. Calendar Page—Provides you with a monthly calendar with programmable reference notes. Sun & Moon Page—Shows a graphic display of both the Sun & Moon locations at various times, dates, and locations.
P R E L I M I N A R UY NIT Main Menu Options Through the Main Menu you can establish the sequence of pages. Page Sequence Setup You may add, remove, or reorder any of the Main Pages, plus additional pages. The default Main pages are Radio, Map, Navigation, Altimeter, Trip Computer, and Main Menu. The Main Menu cannot be removed from the page sequence. If a page is added to the Main Page Sequence, it does not appear in the Main Menu. To move, insert or remove a Main Page: 1.
P R E L I M I N A R Y UNIT OPERATION > SHORTCUTS MENU Shortcuts Menu The Shortcuts Menu is accessed by pressing the Thumb Stick In until the menu pops up on the middle of the display. The Shortcuts Menu can be accessed from most pages. Find ‘N Go—Opens the Find ‘N Go Page. From the Find ‘N Go page, you can find waypoints, contacts, cities, and exits. You may also find Points of Interest, addresses, and intersections if a MapSource product is loaded into the Rino 530.
P R E L I M I N A R Y Waypoints There are numerous ways to create, edit, and use waypoints. Using the Mark Waypoint Page and the Find ‘N Go Menu are two common pages for creating and editing waypoint. You can also create a waypoint using the Map Page. The Rino 530 holds up to 500 waypoints.
UNIT OPERATION > WAYPOINTS P R E L I M I N A R Y Creating Waypoints To create a waypoint for a map feature: 1. With the Pan Map feature active, move the panning arrow (map pointer) to the map item you want and highlight it. 2. Press In and release the Thumb Stick to display the item information page. 3. With the Information Page displayed, highlight the Option Menu button at the top of the page and then press the Thumb Stick to open the menu. 4.
P R E L I M I N A R Y Projecting a Waypoint Editing a Waypoint To project a waypoint: To edit a waypoint: Projecting a waypoint from any map item (another waypoint, etc.) allows you to establish a new waypoint on a bearing and distance projected from that map item. 1. Select a map item from the Find ‘N Go Menu. 2. Highlight the Option Menu on-screen button at the top of the Information Page and press the Thumb Stick In to display the options. Highlight Project Waypoint and press In. 3.
UNIT OPERATION > WAYPOINTS P R E L I M I N A R Y To delete a waypoint or contact: 1. Use the Find ‘N Go feature to display the point. 2. Highlight the Delete button and then press the Thumb Stick In. Confirm the deletion. 4. Use the panning arrow to drag the waypoint to the new location and then press the Thumb Stick In to place it. Press the Page button before pressing the Thumb Stick to cancel moving the waypoint and return to the Main Pages.
P R E L I M I N A R Y UNIT OPERATION > FIND 'N GO Find ‘N Go The Find ‘N Go Menu allows you to find stored locations (waypoints) and map items (cities, exits, etc.). They can be found by name or by those nearest to your current location. If you are using certain MapSource data, the list of find locations is expanded to include categories for Points of Interest, Street Addresses, and Intersections. If you would like to use an option that is grayed out (disabled), you need to load map detail using MapSource.
UNIT OPERATION > FIND 'N GO P R E L I M I N A R Y Finding a Waypoint Waypoints that you have created and stored in the Rino 530 can be found by selecting the Waypoint option from the Find ‘N Go Menu. You can find a waypoint from the list of waypoints using the By Name or Nearest options as explained on the previous page. When selected from the list, the waypoint displays on the Waypoint Information Page.
P R E L I M I N A R Y To find a waypoint by name: 1. Use the Thumb Stick to select Waypoint from the Find ‘N Go Menu. Press the Thumb Stick In to select By Name from the pop-up menu. Press the Thumb Stick In to display the Waypoints List. Find ‘N Go Menu 2. Use the Thumb Stick to enter the name of the waypoint that you would like to find. UNIT OPERATION > FIND 'N GO 3. Select OK when you are finished entering the name. The waypoint list opens with the name closest to the name you entered on the top. 4.
UNIT OPERATION > FIND 'N GO P R E L I M I N A R Y Finding a Contact Contacts that you have received in the Rino 530 can be found by selecting the ‘Contacts’ option from the Find ‘N Go Menu. If the contact did not have a GPS location on the last transmission, a question (?) mark appears below the flag. To view the contact details, highlight the details field and press Left or Right on the Thumb Stick to change to the next data field. Contact List To find a contact: 1.
P R E L I M I N A R Y Finding a City Cities can be found by selecting the Cities option of the Find ‘N Go Menu, selecting the city from the list of Nearest or By Name, and then displaying the City Information Page. The City Information for the selected city displays, including the city name, the size by population, and distance from your location. You can view it on the map, or create a Goto direct route to the city from your current location or from a location defined by the Panning Arrow (Map Pointer).
UNIT OPERATION > FIND 'N GO P R E L I M I N A R Y Finding an Exit You can use the Find Exit option to locate a nearby exit on an interstate highway. Exits are listed only by Nearest. Exit information pages provide a variety of information about services near each exit, such as rest stops, lodging, restaurants, and service stations.
P R E L I M I N A R Y Finding a Point of Interest You can use the Find Points of Interest option to locate a nearby restaurant, lodging, landmark, public building, park, etc. However, you must have transferred a MapSource MetroGuide map to the unit map database. Otherwise, this option, plus Address and Intersection options, are grayed out and are not functional.
UNIT OPERATION > FIND 'N GO P R E L I M I N A R Y To find a point of interest: 1. Use the Thumb Stick to highlight Points of Interest and then press it In to display the Points of Interest Categories List. 2. Use the Thumb Stick to select the desired category and then press it In to display the Types List. 3. Use the Thumb Stick to select the desired type and then press it In to display the list for that type. 4. Use the Option Menu at the top of page to select from either By Name or Nearest options.
P R E L I M I N A R Y Finding an Address or Intersection You can enter a street number, choose a street name from a list and find an address within the area of map data coverage or enter two street names and locate the intersection. To use these options, however, you must be using a MapSource product that provides this type of map data. To locate an address: 1. Use the Thumb Stick to highlight Address and press it In to display the Find Address page. 2.
UNIT OPERATION > FIND 'N GO P R E L I M I N A R Y To locate an intersection: 1. Display the Find ‘N Go Menu and use the Thumb Stick to highlight the Intersection category and press it In to display the Find Intersection page. 2. Highlight the first Street field and then press the Thumb Stick In to display the Street list. 3. Enter the name of the street in the name field at the top of the list using the keyboard data entry method discussed in the Quick Start Guide.
P R E L I M I N A R Y Finding a Last Found Place You can use the Recently Found Places option to locate Points of Interest, Cities, Waypoints or Contacts and Intersections and other locations you have recently retrieved. The process for finding recent points from the Find ‘N Go list is the same as finding a regular waypoint. To find a Last Found Place: 1. Use the Thumb Stick to select the Last Found Places option from the Find ‘N Go List and then press it In.
P R E L I M I N A R Y UNIT OPERATION > WEATHER RADIO Weather Radio The Weather Radio can be turned on and off through the Shortcuts Menu or the Option Menu in the Radio Page. You may also enable Weather Alerts from the Radio Page. Refer to the “Radio Page” section for complete information about the Weather Radio and Weather Alert. To turn the Weather Radio on and off: 1. Open the Radio Page by pressing the Page button or using the on-screen Main Page Menu button . 2.
P R E L I M I N A R YU NIT Sending a Note You may send a note to other Rino 530 users. When you send a note, it appears along the bottom of the display on every Rino 530 user who is using the same Channel and Squelch Code that you are using. The Send Note feature is great when you are trying to get the group to meet at a certain location or tell everyone in the group something in a silent manner. To send a saved note: 1. Press the Thumb Stick In until the Shortcuts Menu appears. 2.
UNIT OPERATION > USING A GOTO P R E L I M I N A R Y Using a Goto The Goto function allows you to create a direct route to a destination, (waypoint, city, or point of interest). Once you have accessed the Information Page for an item, use the Goto button at the bottom of the page to initiate travel, using the Map and Navigation Pages for guidance. To activate a Goto: 1. Use the Find ‘N Go Menu to access the Information Page for any desired destination and use the Thumb Stick to highlight the Goto button.
P R E L I M I N A R YU NIT OPERATION > ROUTES PAGE Routes Page Route navigation allows you to create a sequence of intermediate waypoints that leads you to your final destination. The Rino 530 stores 20 routes, each with up to 50 waypoints. A route can be created and modified from the Route Page, and waypoints can be added to a route from the Find ‘N Go Menu. More complex routes can be created using a PC and MapSource mapping programs and then transferred to the unit’s memory.
UNIT OPERATION > ROUTES PAGE P R E L I M I N A R Y To add a Find ‘N Go Menu item to a route: 1. Select an item from the Find ‘N Go Menu and display its Information Page. If a contact is used in a route, the route changes as the contact’s position is updated, or it may be saved as a Waypoint to serve as a stationary point. 2. Select the page Option Menu and select Add To Route to display the Routes List. 3. Highlight and select the route desired and then press the Thumb Stick In.
P R E L I M I N A R YU To copy the route: 1. From the Route Page, select the on-screen page Option Menu button and press the Thumb Stick In to access the Option Menu. 2. Highlight the Copy Route option and then press the Thumb Stick In to copy. The copied route displays on the Routes Page and is named the same but followed by the numeral 1 (one). You may then rename and/or modify the copied route. To delete the route: 1.
UNIT OPERATION > ROUTES PAGE P R E L I M I N A R Y 3. With the new point highlighted, press the Thumb Stick In to display the Information Page for the new point and then select the on-screen OK button to add it the route. Route point review options To remove a point from the route list: 1. Select the point that you want to remove from the Route Waypoints List and press the Thumb Stick In. 2. Highlight Remove and press the Thumb Stick In to remove the waypoint from the list. 68 Rino520_530_prelim.
P R E L I M I N A R YU Adding or Editing from the Route Map Page You can use the panning arrow with the Route Map Page displayed to add or edit route waypoints. To add a point at either end of a route: 1. Select the Route from the Routes List. Press the Thumb Stick In to display the Route Page. 2. Highlight the on-screen Map button at the bottom of the page and press the Thumb Stick In to display the Route Map Page. 3.
UNIT OPERATION > ROUTES PAGE P R E L I M I N A R Y To review or remove a route point: 1. Select the Route from the Routes List. Press the Thumb Stick In to display the Route Page. 2. Use the Thumb Stick to highlight the desired route and press In to display the Route Page. 3. Use the Thumb Stick to move the map panning arrow to the point you want to review and press In. Select Review or Remove and press In again to either display the Information Page or remove it from the route.
P R E L I M I N A R YU NIT OPERATION > ROUTES PAGE Stopping Navigation To stop navigation, highlight the Stop Navigation option on either the Navigation or Map page’s Option Menu or select the Stop button on the Route Page. Data Fields for the Route Page When navigating a Route, the data displayed in the data fields on the Route Page may be customized to provide useful navigation information. To select data field options: 1.
UNIT OPERATION > TRACKS PAGE P R E L I M I N A R Y Tracks Page To save and use a Track: The Rino 530 draws an electronic bread crumb trail on the Map Page as you travel along. This bread crumb trail is the Track Log. The Track Log contains information about points along its path, including time, and position. The Rino 530 uses this information to allow you to navigate using the saved track. You may also save tracks from other Rino users as they communicate with you. To open the Tracks page: 1.
P R E L I M I N A R YU Using the TracBack Feature The TracBack feature allows you to return along a traveled path (or another Rino user’s path) without marking any waypoints. When you are ready to return to where you started, the Rino 530 takes you back by following the Track Log that you left behind. You can save a total of 20 tracks in the unit memory. The Track Log starts recording as soon as the unit gets a satellite location fix and the Track Log feature is turned on.
UNIT OPERATION > TRACKS PAGE P R E L I M I N A R Y To use the TracBack feature: 1. Highlight the Tracback button on the Tracks page and press the Thumb Stick In. The Tracback Menu options (To Beginning and To End) are displayed. 2. Highlight the desired option and press the Thumb Stick In to enable. 3. Use the Map Page or the Navigation Page to navigate the Track. Setting up the Track Log You can set the track recording interval to Distance, Time, or Automatic.
P R E L I M I N A R YU NIT Proximity Page The Proximity Page lets you define an alarm circle around a stored waypoint/contact position, and can be used to help you avoid dangerous areas or to alert you when you have strayed too far away from other Rino users. Up to ten waypoints may be listed, with a maximum alarm radius of 99.99 nautical or statute miles or kilometers. If entering a proximity alarm circle, a “Near Proximity Point ” message appears.
P R E L I M I N A R Y UNIT OPERATION > SATELLITE PAGE Satellite Page The Satellite Page provides a picture of satellite signal tracking, tells you when the unit is ready for navigation, and shows your location coordinates. To access the Satellite Page: 1. Press the Page button or the Menu icon open the Main Menu. 2. In the Main Menu, scroll down and select Satellite. Signal Strength Bars to Skyview Graphic the horizon around you.
P R E L I M I N A R YU WAAS The Wide Area Augmentation System (WAAS) capability produces a more accurate position fix. When enabled (GPS set to Normal and WAAS set to Enabled through the System Setup Page, also the interface must be set to something other than RTCM mode), this feature searches for WAAS satellites near your location and then receives data for correcting differentials in the GPS satellite signals. WAAS satellite numbers begin at number 33 or above and are displayed on the Satellite Page.
P R E L I M I N A R Y UNIT OPERATION > SATELLITE PAGE New Location—Select this option if you have moved more than 600 hundred miles (from where you last used the unit). Restart Search—Select this option if today is not (date provided). New Location—If you are more than 600 miles (from where you last used the unit), select the New Location and then the Use Map options to approximate your location. This gives the unit reference information and speeds satellite acquisition.
P R E L I M I N A R YU To select the Use With GPS Off option: 1. Use the Thumb Stick to highlight the Option Menu button at the top of the page and then press it In. 2. Use the Thumb Stick to highlight the Use With GPS Off option and then press it In. The Rino 530 stops tracking satellites and should not be used for navigation. However, the next time you turn the unit on, it returns to Normal GPS operation. To select Track Up or North Up: 1.
UNIT OPERATION > SETUP PAGES P R E L I M I N A R Y Setup Pages The Setup Pages allow you to customize the Rino 530 to your personal preferences. You can choose time settings, units of measure, display backlighting and contrast settings, heading measurement, interface options and system operating mode. To access the Time Setup page: 1. Press the Page button or the Menu icon to open the Main Menu. 2. In the Main Menu, scroll down and select Setup. 3. Select the Time icon to open the Time Setup page.
P R E L I M I N A R YU Time Zone—Can be set to one of the eight US Time Zones, or 24 International Time Zones (nearest city or geographical region). Select Other so you can enter the UTC Time Offset. Daylight Savings Time—Can be turned On or Off or set to Automatic. To set the time: 1. Use the Page button to access the Main Menu. 2. Use the Thumb Stick to highlight the Setup Icon. Press the Thumb Stick In to display the Setup Menu. 3. Use the Thumb Stick to highlight the Time Icon.
UNIT OPERATION > SETUP PAGES P R E L I M I N A R Y Position Format—Allows you to choose from different grid formats. The default position format, ‘hddd°mm. mmm’ displays the latitude and longitude in degrees and minutes and is most commonly used. The following additional formats are available: hddd.ddddd°—latitude/longitude in decimal degrees; hddd°mm.mmm’—latitude/longitude in decimal numbers; hddd°mm’ss.
P R E L I M I N A R YU Map Datum—Offers a selection of nearly all map datums in common use. Every map is based on a map datum (a reference model of the earth’s shape) and is usually listed in the title block of the map. If you are comparing GPS coordinates to a paper map, chart, or other reference, the map datum in this field must match the horizontal map datum used to generate the map or other reference.
UNIT OPERATION > SETUP PAGES P R E L I M I N A R Y Contrast Adjustment—Can be adjusted from light to dark using the slider adjacent to the contrast bar. To access the Display Setup page: 1. Press the Page button or the Menu icon to open the Main Menu. 2. In the Main Menu, scroll down and select Setup. 3. Select the Display icon to open the Display Setup page. To adjust the contrast: 1. Highlight the contrast slider and then press the Thumb Stick In. 2.
P R E L I M I N A R YU Display—Allows you to choose from Cardinal Letters, Degrees or Mils. North Reference—You can choose from True, Magnetic, Grid or User options. If ‘User’ is chosen, you must correct for the Magnetic Variation. The Electronic or GPS compass uses the North Reference setting to create a bearing. Switch to Compass Heading when Below–Enter the desired speed for the Rino 530 to switch from using GPS to using the compass for guidance.
UNIT OPERATION > SETUP PAGES P R E L I M I N A R Y The available interface formats are: Garmin—The proprietary format used to exchange waypoint, track, and map data with a PC. Use this setting for transferring data when using a MapSource product. Garmin DGPS—Allows DGPS input using a Garmin beacon receiver and a standard RTCM SC-104 and DGPS tuning. NMEA In/NMEA Out—Supports the output of standard NMEA 0183 version 3.0 data. Use this for real-time plotting with MapSource or 3rd party programs.
P R E L I M I N A R YU System Setup Page The System Setup Page allows you to change GPS operation modes, use the WAAS capabilities, turn the Message Beep and compass on or off, and set the altimeter calibration settings to automatic or manual. See the “Appendix” for WAAS capability information. NIT OPERATION > SETUP PAGES Choose one of the four GPS options other than Normal to significantly save battery power.
UNIT OPERATION > CALENDAR P R E L I M I N A R Y Calendar To change the month and year: This feature provides you with a monthly calendar with programmable reference notes. You can display one monthly calendar at a time and add reference notes using the data entry keypad. Days that are shaded have notes added. You can create reference notes for multiple months and for months in years yet to come. You can record 100 notes with up to 18 characters each.
P R E L I M I N A R Y To edit or delete a note: 1. To edit or delete a note previously created, highlight the date and press the Thumb Stick In. 2. Select Edit Note, or Delete Note, from the pop-up menu. To complete the deletion of the note, press the Thumb Stick In when Yes is highlighted in the pop-up window. 3. To edit the note, change the desired characters using the keyboard as shown in the image to the right. Press OK when you are finished editing the note.
UNIT OPERATION > ALARM CLOCK P R E L I M I N A R Y Alarm Clock This feature provides an alarm for the system clock. Enter a time in the time field and turn the alarm on and off from the control field menu. Remember to enter alarm times in the same time format (UTC or local) you are using for your system. The unit must be on for the alarm clock to work. To access the Alarm Clock: 1. Press the Page button or the Menu icon to open the Main Menu. 2. In the Main Menu, scroll down and select Alarm Clock.
P R E L I M I N A R Y Calculator UNIT OPERATION > CALCULATOR To change calculator options: This feature provides you with all the basic functions of both of standard or scientific calculator. You can perform most calculations identified by the function symbols along the sides of the keypad and can save the results temporarily in the memory. The memory is cleared either manually or when you turn off the Rino 530. To access the Calculator: 1. Press the Page button or the Menu icon open the Main Menu. 2.
UNIT OPERATION > STOPWATCH P R E L I M I N A R Y Stopwatch This feature allows you to use the unit as a stopwatch, including using it as a lap timer. You may also have the unit record the lap time based on distance. For example, if you set the lap distance to one mile, the unit records the time it takes you to travel one mile. To access the Stopwatch: 1. Press the Page button or the Menu icon to open the Main Menu. 2. In the Main Menu, scroll down and select the Stopwatch icon.
P R E L I M I N A R YU Sun & Moon This feature provides you with a graphic display of both sun and moon positioning for a certain date, time and location with times for sunrise, sunset, moonrise, and moonset. To access the Sun & Moon Page: 1. Press the Page button or the Menu icon to open the Main Menu. 2. In the Main Menu, scroll down and select the Sun & Moon icon. To set the date and time: 1.
UNIT OPERATION > HUNT & FISH P R E L I M I N A R Y Hunt & Fish This feature provides you with a listing of best times for hunting and fishing for a chosen location and date. To access the Hunt & Fish Page: 1. Press the Page button or the Menu icon to open the Main Menu. 2. In the Main Menu, scroll down and select the Hunt & Fish icon. To set the date: 1. Highlight the date field and then press In on the Thumb Stick to begin data entry of individual Hunt & Fish Page characters. 2.
P R E L I M I N A R UY O NIT PERATION > AREA CALCULATOR Area Calculator This feature provides you an area calculation as you move about a location or view a saved track. The area calculation displays in acres, hectares, and square feet, square yards, square meters, square kilometers, and square miles. To access the Area Calculator: 1. Press the Page button or the Menu icon to open the Main Menu. 2. In the Main Menu, scroll down and select the Area Calculator icon.
UNIT OPERATION > GAMES P R E L I M I N A R Y Games The Games Page includes Memory Race, Waypoint Bomber, Clothesline, Assimilation and Beast Hunt. Highlight the appropriate icon and then press the Thumb Stick In to play the desired game. Brief instructions are displayed when you start each game. All players must be on the same channel/squelch code to play. Play by yourself or race against others. Press Page to quit at any time. Memory Race To adjust the Grid Size or Square Size: Games Menu 1.
P R E L I M I N A R Y Waypoint Bomber In this game, it is good to stay on the move! Two or more players attempt to “bomb” each other. Move your cursor around on the map page using your Thumb Stick. When you think an opponent is close to your cursor, drop a bomb. The receiving radio shows an “Incoming” message. If the receiving radio is within the blast circle (about 45 feet), it displays a message that you have been hit. You must wait 30 seconds between shots to reload.
UNIT OPERATION > GAMES P R E L I M I N A R Y Clothesline Team members select the same user symbol and then attempt to “hit” or “clothesline” other players by pressing the Talk button when an opposing team member is between them. You may also mark a point and assign it a symbol to be used as a stationary team member. Wait 30 seconds between attempts. Press Call to view the score and Page to quit the game. Assimilation Think of this as a high-tech game of tag.
P R E L I M I N A R Y What is FRS? FRS, or Family Radio Service, is a UHF radio frequency band allocated by the FCC for general public use. The operating frequency ranges from 462.5625 to 467.7125 MHz, with a maximum transmitting power of one half watt. FRS radios are small and lightweight, making them ideally suited for outdoor activities. FRS radios typically feature a half watt of transmit power. You can expect your FRS radio to offer reliable operation at a one-mile range.
APPENDIX > WHAT IS FRS? P R E L I M I N A R Y Channel scan allows your FRS radio to scan all FRS frequencies for signals. After scanning briefly to see what channels other users are on, simply set your FRS radios to an unused channel and enjoy less interference. For greater privacy, some FRS radios have a voice scramble feature. This feature causes your message to sound garbled to other FRS users that are not part of your group.
P R E L I M I N A R Y Specifications Physical Case: Size: Fully-gasketed, high-impact plastic alloy, waterproof to IPX7 standards (waterproof to one meter for 30 minutes) 4.5” H x 2.3” W x 1.6” D; 7” H with antenna (11.4 x 5.8 x 4.1; 17.8 cm) APPENDIX > SPECIFICATIONS Acquisition time: Approx. 15 seconds (warm start) Approx. 45 seconds (EZinit/cold start) Approx. 5 minutes (First Time/AutoLocate®) Update Rate: 1/second, continuous GPS Accuracy: <15 meters (49 ft) RMS, 95% typical1 Weight: Approx. 7.
APPENDIX > SPECIFICATIONS P R E L I M I N A R Y Radio Channels: 1–14 FRS, 15–22 GMRS (requires FCC license in the U.S.) 1–7 Weather Radio channels Squelch Codes: 1–38 Range: Up to 2 miles on FRS; up to 5 miles on GMRS Specifications are subject to change without notice. Subject to accuracy degradation to 100m 2DRMS under the U.S. DoD-imposed Selective Availability program. 1 With optional Garmin Differential Beacon Receiver Input (such as Garmin GBR 23).
P R E L I M I N A R Y Accessories To obtain accessories, see your local dealer or visit the Garmin web site at www.garmin.com. APPENDIX > ACCESSORIES Flexible Ear Receiver—Comfortable earpiece for better hearing ability of your Rino. 12-volt Adapter Cable—Provides unit power from an automobile cigarette lighter. Headset with VOX Boom Mic—Hands-free at its best! Utilize the Rino’s VOX (Voice Operated Transmission) feature with this headset and voice activated boom mic. 2.5 to 3.
P R E L I M I N A R Y APPENDIX > TRANSFERRING MAPSOURCE DATA Transferring MapSource Data If you have purchased a Garmin MapSource CD-ROM mapping program you may want to transfer detailed map data before beginning use, to provide your unit with maximum Find features and mapping capability. The Rino 530 accepts up to 24 MB of map data from most MapSource products. It is not possible to transfer 3rd party maps into Garmin products.
P R E L I M I N A A R Y> T PPENDIX RANSFERRING MAPSOURCE DATA To setup for data transfer: 1. Remove the Power/Data Port cover on the back of the unit by lifting up on the protective cover on the back of the unit. 2. Connect the serial port connection on the cable to the PC serial port. 3. Connect the remaining cable connector to the back of the Rino 530 by orienting the slot on the connector with indexing bar on the back of the unit. Then, slide the connector in place.
P R E L I M I N A R Y APPENDIX > GPS TROUBLESHOOTING GUIDE GPS Troubleshooting Guide Symptom Probable Cause Remedy Unit does not turn on. Batteries are exhausted. Replace batteries. Unit does not turn on, even with new batteries. Batteries may be installed backwards. Reinstall batteries. You are pressing and releasing the Power button. You must press and hold the Power button for 2 seconds. The unit turns on, then turns off. Batteries may be nearly exhausted. Replace batteries.
P R E L I M I N A AR Y> R PPENDIX ADIO TROUBLESHOOTING GUIDE Radio Troubleshooting Guide Symbol Probable Cause Remedy Radio not transmitting Talk key may not be fully depressed Press and hold Talk key until done talking. FRS/GMRS Radio feature may not be on. Turn radio on. Incorrect channel/Squelch Code setting Make sure other radios are on the same channel and Squelch Code. Out of range or obstructions. Decrease distance between radios. Limited talk range.
APPENDIX > FREQUENCY CHARTS P R E L I M I N A R Y FRS Frequency Chart Channel # Transmit Frequency (MHz) Receive Frequency (MHz) Channel Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 467.5625 467.5875 467.6125 467.6375 467.6625 467.6875 467.7125 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 467.5625 467.5875 467.6125 467.6375 467.6625 467.6875 467.
P R E L I M I N A R YA PPENDIX > FREQUENCY CHARTS GMRS Frequency Chart Channel # Transmit Frequency (MHz) Receive Frequency (MHz) Channel Description 15 462.5500 462.5500 GMRS Primary 1 16 462.5750 462.5750 GMRS Primary 2 17 462.6000 462.6000 GMRS Primary 3 18 462.6250 462.6250 GMRS Primary 4 19 462.6500 462.6500 GMRS Primary 5 20 462.6750 462.6750 GMRS Primary 6 21 462.7000 462.7000 GMRS Primary 7 22 462.7250 462.7250 GMRS Primary 8 15R 467.5500 462.
P R E L I M I N A R Y APPENDIX > DATA FIELD DEFINITIONS Data Field Definitions The following data field options are available on the Map, Navigation, Altimeter, and Trip Computer Pages. Current ETE—The estimated time needed to arrive at the next waypoint on your route. Elevation—The altitude (height) above or below sea level. Ambient Pressure—The uncalibrated current pressure. (Altimeter Page Only.) Final Destination—The last waypoint on your route.
P R E L I M I N A R YA PPENDIX > DATA FIELD DEFINITIONS Maximum Elevation—The highest elevation reached. (Altimeter Page Only.) Trip Odometer—A running tally of distance travelled since last reset. Maximum Speed—The maximum speed the unit has moved. Trip Time–Moving—A running tally of movement time elapsed since last reset. Minimum Elevation—The lowest elevation reached. (Altimeter Page Only.) Moving Avg. Speed—Average speed of the unit while moving.
P R E L I M I N A R Y APPENDIX > INTERFACE INFORMATION Interface Information Interface formats are selected in the Setup Interface Page. See also the “MapSource Setup” section of this Appendix for information on using the Rino 530 with MapSource. The input/output lines on your Rino 530 unit are RS-232 compatible, allowing easy interface to a wide range of external devices, including PC’s, differential beacon receivers, marine autopilots, and /or a second GPS receiver. The NMEA 0183 version 3.
P R E L I M I N A AR Y> FCC C PPENDIX FCC Compliance Information The Rino 530 complies with Part 15 of the FCC regulations and with Canadian RSS-210 and ICES-003 for Class B digital devices. Operation of this device is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
P R E L I M I N A R Y APPENDIX > FCC LICENSING INFORMATION FCC Licensing Information The Rino 530 two-way radio operates on General Mobile Radio Service (GMRS) frequencies regulated by the Federal Communications Commission (FCC) in the United States. Operation on the GMRS frequencies is subject to additional rules as specified in 47 CFR Part 95. In order to transmit on GMRS frequencies, you are required to obtain a license from the FCC.
P R E L I M I N A R Y Limited Warranty This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Garmin will at its sole option repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost.
APPENDIX > LIMITED WARRANTY P R E L I M I N A R Y sales receipt is required as the proof of purchase for warranty repairs. Garmin International, Inc. 1200 E 151st Street, Olathe, Kansas 66062 U.S.A. Tel. 913/397.8200 Fax. 913/397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL U.K. Tel. 44/0870.8501241 Fax 44/0870.8501251 Online Auction Purchases: Products sold through online auctions are not eligible for rebates or other special offers from Garmin.
P R E L I M I N A AR Y> S PPENDIX OFTWARE LICENSE AGREEMENT Software License Agreement Product Registration Garmin grants you a limited license to use the software embedded in this device (the “Software”) in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin.
P R E L I M I N A R Y APPENDIX > WARNINGS AND CAUTIONS Warnings and Cautions The GPS system is operated by the United States government, which is solely responsible for its accuracy and maintenance. The system is subject to changes which could affect the accuracy and performance of all GPS equipment. Although the Garmin Rino 530 is a precision electronic NAVigation AID (NAVAID), any NAVAID can be misused or misinterpreted and, therefore, become unsafe.
P R E L I M I N A R AY PPENDIX IMPORTANT: READ THIS INFORMATION BEFORE USING YOUR RINO: Exposure to Radio Frequency Signals—Your wireless handheld radio is a low power radio transmitter and receiver. When it is on, it receives and also sends out radio frequency (RF) signals. In August 1996, The Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless radios. Those guidelines are consistent with safety standards previously set by both U.S.
P R E L I M I N A R Y APPENDIX > WARNINGS AND CAUTIONS the pacemaker to minimize the potential for interference, and should turn the radio off immediately if you have any reason to suspect that interference is taking place. Commercial Aircraft—Many commercial airlines prohibit the use of FRS radios on board. Switch OFF your radio before boarding an aircraft or check the airline rules. Hearing Aids—Some digital wireless radios may interfere with some hearing aids.
P R E L I M I N A R Y A Accessories 103 Accuracy 101 Acquisition time 101 Address 59 Add to Route 52, 53, 55, 56, 58 Alarm 75, 90 Alarm Clock 90 Altimeter Page 37 Altitude 37 Arriving at Destination 64 Arrow 27 Ascent 37, 110 Auto Zoom 30 B Barometric Pressure 38, 39, 41 Basemap 1 Battery icon 6 Battery Life 102 Battery Type, Changing 87 Bearing 32 Bearing Pointer 32, 34, 64 BlueChart 104 Rino® 530 Owner’s Manual Rino520_530_prelim.
INDEX I Informational Picture 18 Initialize 8 Interface formats 112 Intersection 59, 60 K Keylock 5, 46 L Lap 92 Last Found Place 61 License Agreement 117 Line of sight 100 Lock Buttons/Keys 5, 46 Direction 35 on Road 30 LORAN TD Format 82 M Main Display Pages 4 Main Menu 45 MapSource 1, 24, 59, 65, 86 Setup 104 Map Data 31, 59, 104 122 Rino520_530_prelim.
P R E L I M I N A R Y S Satellite Page 24, 76 GPS Off 77 New Location 78 North Up 78 Options 78 Track Up 78 Scanlist 12, 13, 16 Scan Channels 12, 100 Scan Codes 12 Scramble 14, 100 Setup Map 26, 29 Page 80 Radio 14 Scanlist 16 TD field 82 Time Page 80 Tones 16 Shortcut Menu 5, 46 Show Data Fields 34 Sight ‘N Go 34, 35 Signal Strength 76 Sky View 76 Specifications 101 Squelch codes 10, 99 Rino® 530 Owner’s Manual Rino520_530_prelim.
Rino520_530_prelim.
Rino520_530_prelim.
For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin web site at www.garmin.com. © Copyright 2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K. Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan www.garmin.com Part Number 190-00NNN-00 Rev.
