Cov lus qhia

STRETCH
Peel away the parchment or
kraft paper and lightly stretch
transfer on shirt horizontally
for a few seconds to improve
feel.
REPRESS
Place the kraft or parchment
paper back over the
garment, and press for 15-30
seconds at application
temperature for increased
durability.
WARM PEEL
Use a cloth and hold/rub onto
the back of the transfer for 5-10
seconds, and then peel.
PRESS
Cover with a sheet of
parchment or kraft paper and
press at 390ºF/200ºC for 15 sec.
See Reference Table for varying
substrates
LOAD GARMENT
Place your garment onto the
press. Align your image on top
of the garment. Make sure the
paper is print side DOWN. Fix
it in place with heat resistant
tape.
Preheat the closed press to
about 390°F/200°C. Wait for
the heat press to reach the
desired temperature before
moving forward.
1
5 6 7
2 3
4
Forever Transparent 1-Step Instructions
Set Print Mode:
Uninet iColor 1 Step Light
• Must be in Overprint
• Page size must match media
being used. (A3, A4, A4 XL)
• White coverage: 200% - 300%
Temperature: 390ºF/200ºC
iColor 500/600: Ultra Heavy 1
iColor 550/540: Coated Glossy Thick
iColor 560: Thick to 105g
iColor 650: Ultra Heavy 3
iColor 800: Thick to 163g
• Make sure design is mirrored
• Print side is plain side