Instruction Manual

Greenhouse

Base

Assembly

Instructions

Greenhouse

Base

Assembly

Instructions

Parts List

Important.

Please read the instructions

completely before starting

assembly.

Greenhouse Sizes

Profile 4 x 6 6 x 6 8 x 6 Description Length (mm) Code

2 Base Frame Sections 2542 H1-8

242Base Frame Sections 1920 H1-6

2 Base Frame Sections 1298 H1-4

444Corner Joints H2

81214

Frame to base hook clips

16 16 16 Bolts M610

16 16 16 Nuts M6-1

14 16 18 Ground Pegs H4

PAGE 1
Greenhouse Base Assembly Instructions Important. Please read the instructions completely before starting assembly.
PAGE 2
Introduction • Construct and secure the base before assembling the greenhouse. • The base must stand on a firm level surface. • If mounted on earth, ensure the soil is well compacted and level. Secure the base using the ground pegs provided: these need to be set into pockets of concrete. • The base can be mounted on slabs provided they are level and are firmly laid. • A concrete pad can also be used: ensure that it slopes off to the sides to prevent water ingress around the edges.