Use Instruction

Manual for the Remote Control
Thanks for choosing our product. In order to better use
this product, please read this manual carefully before using.
This manual will guide you how to correctly use and maintain
this product.
Out company will keep providing you with high-quality
products with the spirit of pursuing perfection and
meticulosity. Thank you.
Product Feature
The Remote Control is exquisite and light with smooth
control, long control distance, strong anti-interference
capability, long service life, and beautiful appearance.
It can support up to 4 key-value codes, and millions of
address codes with good frequency consistency and stable
performance. It is especially suitable for supporting the use of
various radio remote control systems.
Specifications
Use Instruction
1. Please install the required type of battery before use, and
pay attention to the positive and negative electrodes when
installing.
2. Press the corresponding buttons on the panel to realize the
corresponding remote-control function. When a button is
pressed, the LED indicator on the top of the panel will turn on.
3. Press the buttons on the panel. When receiving terminal
receives the corresponding signal, corresponding function will
be realized.
Trouble Shooting
1.If there is no response and the indicator is still off after the
remote-control button is pressed when it is used for the first
time.
Solution: The battery is not installed or the battery is not
installed properly. Please install the batteries correctly.
2.The indicator light is on when using the remote control,
but there is no response from the receiving terminal.
Solution: 1) The Remote Control should be aimed at the
receiving end, and ensure there is no obstruction in between to
avoid remote control effect from being affected.
2) The distance is too far. Please move to a suitable distance
before using the remote control.
3. After long-term use, the remote-control button does not
respond after pressing and the indicator light does not turn on.
Solution: The battery is low. Please replace the battery of
correct type, and pay attention to the direction of the battery
when installing.
Explosive Hazard: DO NOT throw this product into
fire, as this may cause an explosion.
Attention: Non-professionals are not allowed to
disassemble this product, as this may cause permanent damage.
If you have any questions, please contact our company or an
authorized service provider.
Warranty
Thank you for purchasing our product. From the date you
purchase this product, you are eligible for free warranty for 1
year (batteries excluded).
Warranty means that our company is responsible for repair
or replacement of the products sold by the company in the
event of failure or damage. All losses caused by other human
factors will not be borne by the company.
Repair Procedure
Before requesting a repair, check the instructions to make
sure that a problem indeed occurs to the product. If it cannot
be resolved, please contact our company or authorized service
provider and describe the cause of the failure in detail,
including the product's model and usage condition. This
information is very important for us to solve the problem
quickly.
Damages caused by the customer due to improper use or
failure without following the instructions in this manual or
other irresistible natural disasters, etc. are not included in the
warranty. In these cases, our company will not be responsible,
and the repair procedure will be carried out in accordance with
the procedure stated above, but repair cost will be charged.
FCC Statement
This device complies with part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accep
t any interference received, including interference that
may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party
Product Name
Wireless Remote Control
Model
DD206
Appearance Size
100*27*15mm
Battery
DC3V，AAA Battery*2Pcs
Operating Voltage
2.5V~3.4V
Working Current
≤10mA
Quiescent Current
≤3uA
Emission Source
RFID
Emission Frequency
433MHz
Operating Distance
8~20m (axis with no block
and within operating voltage)
Effective Angle
120°
Keystroke Life
≥100,000 times
Operating
Temperature
-25℃~+55℃
Storage Temperature
-25℃~+55℃
Weight
19g