Data Sheet

HOUSING DESCRIPTION
HEATER POWER SUPPLY Requires 24V AC 15 watt power input (HWB-2 or H-2 models only)
CAMERA POWER SUPPLY Use only 24V AC cameras with HWB-2, H-2, HWB-3 models
MAXIMUM CAMERA AND LENS SIZE 2.68" (W) x 2.1" (H) x 7.75" (L) | 68 (W) x 54 (H) x 197 (L) mm
CABLE ENTRY Two liquid tight rear fittings accept cable diameters from 4.3mm to 11.9mm.
Two bottom feed-through liquid tight fittings accept cable diameters from 4. 6mm to 7. 9mm
WINDOW 3mm (0.12") thick UV stabilized polycarbonate
HOUSING MOUNTING Four available 1/4 -20 tapped holes. Only one set of two are required for mounting.
CAMERA MOUNTING Removable camera bracket. Mounted with two screws.
CONSTRUCTION Aluminum cover , aluminum base, aluminum mounting foot, polycarbonate faceplate,
glass reinforced polycarbonate end caps, neoprene gasket, ethylene propylene seal,
and all stainless steel hardware.
FINISH Off white
DIMENSIONS 3.75" (Dia) x 10.9" (L) | 96mm (Dia) x 277mm (L)
WEIGHT 3 lbs./ 1.4kg
INTERNAL TEMPERATURE (WITH HEATER) At external temperatures of –40° F to +122° F (–40° C to +50° C)
Maintains internal temperatures between –4° F and +131° F (– 20° C and +55° C) with heater .
SALT ATMOSPHERE MIL-STD-810E, method 509, procedure I.
ENCLOSURE PROTECTION Designed to meet NEMA 4, IP 65 rating.
SAFETY COMPLIANCE CE, UL, cUL
ACCESSORIES Sunshield (SS-1): Provides protection from the direct rays of sun and promotes cooling to reduce
internal housing temperatures in hot climates.
Wall bracket (WB-1): Attached to the foot of the housing allows wires to be fed-through the
mount and into the foot of the housing (wall bracket is included with HWB-1 and HWB-2).
Ceiling ‘J’ bracket (JB-1): Allows housing to be mounted from ceiling and allows wires to be
fed-through the mount and into the foot of the housing.
Pole Mount Adapter (PMA-1): Includes bracket and stainless steel straps for mounting to poles
from 3" to 15" in diameter .
CUSTOM PRO-PAK KITS Call for custom lens and camera combinations.
OPTIONAL HOUSING MODEL HWB-3
Includes heater and blower and accommodates camera/lens combinations up to 9" long.
Maximum camera and lens size 2.8" x 2.8" x 9.0" (W x H x L), call for details.
specifications
• Compact, attractive design for indoor or
outdoor use
• Slide-off cover provides full accessibility to
camera for quick installation and service
• Available with or without heater
• Optional sunshield, ceiling, and pole mount
• Rugged aluminum housing suitable for all
weather conditions
NEW YORK: 55 MALL DRIVE COMMACK, NY 11725 • TEL: [phone] • [phone] • FAX: [phone]
CALIFORNIA: 20521 EARL STREET TORRANCE, CA 90503 • TEL: [phone] • [phone] • FAX: [phone]
www.computarganz.com © 2008 CBC (AMERICA) Corp. All Rights Reserved. 5/08
Housing Specifications
specifications
Housings are pre-assembled
with a variety of camera & lens
options including Day/Night models
Pro-Pak Kits
OUTDOOR HOUSINGS WITH PRE-INSTALLED CAMERAS
NY: 1-800-422-6707
CA: 1-800-888-0131
www.computarganz.com