Brochure

ManualsBrandsGantner Electronic ManualsElectronicsAccess Control Terminal, Access Control Terminal with Biometry

Function description

The GAT Access 6100 reads contact-free data carriers and checks and

grants authorisations. The user holds the data carrier over the round

scan field and selects the required service via the acknowledge key. The

integrated 4-segment LED display, monochrome LCD display and acoustic

signal indicate authorisation.

Further functions:

•

Activation of turnstiles, doors etc. via relay output

•

Feedback input

•

User guidance via monochrome display (LCD), 4-segment LED display,

illuminated round scan field and beeper

•

Secure data transmission between reader and data carrier

•

RFID frequency 13.56 MHz

•

Reading of LEGIC

, MIFARE

standard and ISO 15693 data carriers

(depending on the device type)

•

Opening of housing only possible with special tool

•

Plug & Play installation

GAT Access 6100

Access Control Terminal

Application

The GAT Access 6100 is a stylish terminal for access control in leisure

facilities such as swimming pools, spas and gyms. Identification at

the terminal is by contact-free RFID data carrier (Radio Frequency

Identification).

Information display for user guidance is realised via a graphical mono-

chrome display (LCD). The different versions (see order information) give

technological flexibility.

Description PartNo.

GAT Access 6100 B

Access control terminal with monochrome display (LCD)

and contact-free reader for LEGIC

data carriers

651681

GAT Access 6100 F

Access control terminal with monochrome display (LCD)

and contact-free reader for MIFARE

data carriers

776487

GAT Access 6100 ISO

Access control terminal with monochrome display (LCD)

and contact-free reader for ISO 15693 data carriers

651782

www.gantner.com

Order information

Description PartNo.

GAT Access 6100 Manual

Operating and configuration instructions, English

332727

GAT Reader WK

Tool to open the reader housing

581683

Accessories

Valid as from July 30

, 2013 • Technical data subject to modifications without notice!

DB_GAT-ACCESS6100--EN_11.indd • PartNo.: 860279

Summary of content (4 pages)

PAGE 1
GAT Access 6100 Access Control Terminal Application The GAT Access 6100 is a stylish terminal for access control in leisure facilities such as swimming pools, spas and gyms. Identification at the terminal is by contact-free RFID data carrier (Radio Frequency Identification). Information display for user guidance is realised via a graphical mono chrome display (LCD). The different versions (see order information) give technological flexibility.
PAGE 2
Technical data Nominal voltage: 12/24 VDC (SELV - safety extra-low voltage) Permitted input voltage: 10 to 28 VDC Aver. power consumption: 3W Data storage: Internal EEPROM memory for configuring and booking memory, data preservation min. 10 years Internal clock: Data preservation approx.
PAGE 3
Mounting and installation instructions The device back part is secured by screws to a flat background (e.g. Wall mounting concrete wall). When fixing to an uneven background the device back part Cables can be flush (1) or suface-mounted (2). must not be distorted as this will prevent correct connection of the upper When surface mounting please check whether the cables can still be part. Recommended mounting height: top edge of device 1.3 m.
PAGE 4
Electrical connections TCP/IP with external power supply GAT Access 6100 e.g. Turnstile B A GND VOut+ Mains power Motor control Power supply unit e.g. GAT Power Supply SP014/1 TX + TX RX + RX - GND C1 NO 1 VIN + IN1 + IN1 - Feedback control TCP/IP 1 M Network Relay output Ethernet, Connection via screw terminals. For activation of devices like turnstiles etc.. The relay contact is of type NO (maker contact). Please observe the max.