Quick Installation Guide

ManualsBrandsGAMING PARTNERS INTERNATIONAL ManualsElectronicsSMART Check Point

QUICK INSTALLATION GUIDE

CONTENT OF THE BOX

Display posion kit

• Product Sheet

• QC Document

• Quick Installaon Guide

The box is designed to contain 2 SMART Check Point units. In this

case, all the elements are doubled.

Changes / modicaons not approved by the responsible party

could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protecon against harmful interference in a residenal installa-

on. This equipment generates, uses and can radiate radio frequency energy and, if

not in-stalled and used in accordance with the instrucons, may cause harmful inter-

ference to radio communicaons. However, there is no guarantee that interference

will not occur in a parcular installaon. If this equipment does cause harmful inter-

ference to radio or television recepon, which can be determined by turning the

equipment o and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separaon between the equipment and receiver.

—Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

—Consult the dealer or an experienced radio/ TV technician for help.

QUICK INSTALLATION GUIDE

DISPLAY ADAPTATION

 Vercal adjustment

2 U shape elements can be added or removed to ad-

just the height of the display by 1.5 or 3 mm. When

removed, the display has the same height as the an-

tenna.

 Horizontal adjustment

With these 2 screws, the display can be moved for-

ward and backwards up to 15mm when installing

the device

This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operaon.

Summary of content (2 pages)

PAGE 1
QUICK INSTALLATION GUIDE CONTENT OF THE BOX The box is designed to contain 2 SMART Check Point units. In this case, all the elements are doubled. Changes / modifications not approved by the responsible party could void the user’s authority to operate the equipment. Display position kit • • • Product Sheet QC Document Quick Installation Guide NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 2
QUICK INSTALLATION GUIDE GENERAL INSTALLATION  Remove the elements from the box c  Place the Check point into the gaming table using the brackets (a) for adjustment a d  Plug the Ethernet cord into the back of the Check Point (b) c  Plug (c) into the Check Point b  Plug the power corde into (d). The device starts automatically This device complies with part 15 of the FCC Rules.