A’DIVA OWNER’S GUIDE
CONTENTS 4 5 6 7 8 9 10 INTRODUCTION OPTIONAL ACCESSORIES AND MOUNTS INITIAL SET UP DETAILED SET UP PLACEMENT OF SPEAKERS SPECIFICATIONS AND WARNING TECHNICAL SUPPORT AND WARRANTY 3
INTRODUCTION RUN-IN PERIOD Thank you for choosing Gallo Acoustics loudspeakers. Your Gallo loudspeaker utilises proprietary technologies that only reach their optimum performance levels after a period of 60 - 80 hours of use. During this run-in process the loudspeaker driver will loosen-up, the patented S2 fill material will settle, and your loudspeakers will develop the acoustic characteristics that are our signature.
OPTIONAL ACCESSORIES Available from your dealer, or directly from www.galloacoustics.com WALL MOUNT The Wall Mount is compatible with all Micro and A’Diva loudspeakers, and is available in Black, White and Stainless Steel finishes. Speaker cable can pass through the mount, allowing for a neat installation. IN-CEILING MOUNT Specific versions of the In-Ceiling Mount are available for Micro and A’Diva loudspeakers.
INITIAL SET UP Please ensure that your amplifier is turned off before connecting the loudspeakers. When connecting speaker cables to your loudspeakers and amplifier, ensure that correct polarity is observed - red (+) terminal on the speaker to the red (+) terminal on your amplifier, black (-) terminal on the speaker to the black (-) terminal on your amplifier.
STEREO AND 2.1 MULTI-CHANNEL AND HOME CINEMA When using A’Diva loudspeakers in a stereo or 2.1 system, employing a suitable crossover or filter will allow you to get the best performance from the speakers whilst protecting them from the lowest frequencies. If a crossover is not used, then you must limit the volume or use a low power amplifier to ensure that permanent damage to the loudspeakers is avoided.
PLACEMENT OF SPEAKERS The placement of loudspeakers within a room can have a great effect on the sound of the system - small changes can make significant improvements. 8 • When speakers are placed on the included Isolation Ring, ensure that they sit near the front edge of the surface to prevent any diffraction effect, where the sound bounces off the surface itself. • The distance from the listening position to the loudspeakers should not be less than the distance between the speakers.
SPECIFICATIONS Frequency Response 76hz to 20khz Sensitivity 88 dB Nominal Impedance 8 Ohms Power Handling Full Range - 50 Watts Crossover - 100 Watts Crossover None Driver 3” full range Dimensions 12.7cm (5”) diameter sphere Weight 1.6kg Cone Material Mical Polypropylene Compound Enclosure Material Mild Steel/Stainless Steel Warranty 5 years WARNING Care must be taken when installing, mounting or standing this product to walls, ceilings or surfaces.
TECHNICAL SUPPORT WARRANTY Should you encounter problems using this product, please contact your dealer or local distributor. Anthony Gallo Acoustics Ltd warrants to the end user that this product will be free from defects in materials and workmanship in the course of normal use for a period of five years from the date of purchase.
BACKCOVER ANTHONY GALLO ACOUSTICS LTD THE INOX BUILDING CALDWELLSIDE LANARK SCOTLAND UNITED KINGDOM ML11 7SR WWW.GALLOACOUSTICS.
