Manualshelf

Quick start Guide

ManualsBrandsGalaxy Audio ManualsLive SoundHot Spot 4 Near-Field Monitor
12
GAL A X Y AUDIO Quick Start Guide
Included Components
1. HS4 x1
3. Quick Start Guide x1
2. SA-1 Stand Adapter x1
1.
3.2.
Attach the SA-1 to the mic stand
1
Stand Mounting (Optional)
3
Lift the HS4 over the stand, align it up
with the hole.
Bring the HS4 down onto the stand
gently until secure.
2
Setup
Connect one end of a 1/4" cable to
either 1/4" input, and the other end to
your powered amplifier.
2
To Daisy Chain:
Connect one end of a 1/4" cable to either 1/4" input, and the other end to either 1/4" input on the other HS4. Repeat for any other HS4's being Daisy Chained.
1
8 Ohms for 2 Hot Spots
5.33 Ohms for 3 Hot Spots
4 Ohms for 4 Hot Spots
(The Total Load)
For more details on
Ohm’s Law, Scan Here:
GAL A X Y AUDIO Quick Start Guide
Included Components
1. HS4 x1
3. Quick Start Guide x1
2. SA-1 Stand Adapter x1
1.
3.2.
Attach the SA-1 to the mic stand
1
Stand Mounting (Optional)
3
Lift the HS4 over the stand, align it up
with the hole.
Bring the HS4 down onto the stand
gently until secure.
2
Setup
Connect one end of a 1/4" cable to
either 1/4" input, and the other end to
your powered amplifier.
2
To Daisy Chain:
Connect one end of a 1/4" cable to either 1/4" input, and the other end to either 1/4" input on the other HS4. Repeat for any other HS4's being Daisy Chained.
1
8 Ohms for 2 Hot Spots
5.33 Ohms for 3 Hot Spots
4 Ohms for 4 Hot Spots
(The Total Load)
For more details on
Ohm’s Law, Scan Here:

Summary of content (2 pages)