User's Instructions

Installation and User Instructions for S822 Readers

Mount the Backplate

To mount the backplate:

1) Detach the main body of the reader from the

backplate by releasing the two securing screws

along the bottom edge of the reader.

2) Mount the backplate adjacent to the opening edge

of the door and at a convenient height. Feed the

cable to the reader through the backplate.

The backplate has suitable holes for connection to most standard electrical backboxes.

The S822 is a contactless smart-card reader, which uses

p . The

S822 is able to read HID i smart cards, and the

card serial number on Philips MIFARE smart cards.

For either type of card, the S822 supports the use of

unencoded cards (where only the unique card serial

number is read). In the case of HID i cards, an

encoded card number can be read. Encoding formats

supported include HID's own formats and the "smartMAX"

format.

CLASS

20mA current loop seudo-random communications

®®

PAGE 1
Installation and User Instructions for S822 Readers The S822 is a contactless smart-card reader, which uses 20mA current loop pseudo-random communications. The ® TM S822 is able to read HID iCLASS smart cards, and the ® ® card serial number on Philips MIFARE smart cards. For either type of card, the S822 supports the use of unencoded cards (where only the unique card serial number is read). In the case of HID iCLASS cards, an encoded card number can be read.
PAGE 2
Reader Connections 20mA Current Loop Reader Connections Controller connections (20mA reader port) 0V Rx+ RxTx+ Tx- Connect shield at controller end only (connect to case) 3 Red Black Green Orange Reader 12V White Blue Note: the brown wire is not used Using the Reader Present the card face-on to the reader until you hear a "bleep". If the green indicator is lit, the card has been accepted and the door is unlocked.