Installation Instructions

Installation and User Instructions for S821 Enrollment Readers

Cable Connection

The S821 enrollment reader is used to encode Texas

Instruments (ISO 15693) smart cards using the

"smartMAX" format.

Insert the jack plug

into the box on the

end of the reader

cable.

Insert the power

plug into

the box on

the end of the

reader cable

Connect the 12Vdc

power source to the

mains supply.

Connect to a serial port

of a PC installed with the

SMS software. Set up the

port in the Install/Client

Ports screen of the SMS

software.

PAGE 1
Installation and User Instructions for S821 Enrollment Readers The S821 enrollment reader is used to encode Texas TM Instruments (ISO 15693) smart cards using the "smartMAX" format. 1 Cable Connection Insert the jack plug into the box on the end of the reader cable. Insert the power plug into the box on the end of the reader cable. Connect to a serial port of a PC installed with the SMS software. Set up the port in the Install/Client Ports screen of the SMS software.
PAGE 2
Enrollment Procedure To encode a card: 1. Log in to the SMS software at the PC that the reader is connected to. 2. Start the enrollment procedure from the appropriate screen in the SMS software. For example, if you are using a standard client, use the Encode button in the Card Holders screen. 3. When prompted, present the card to the encoder. You will hear a "bleep" when the card has been encoded. 9600-0393. Installation and User Instructions for S821 Enrollment Readers, Issue 1.0x1 10th March 2004.