G4S Longitude GPS Device User Operation Manual Version 1.03 Last Updated: Feb 15, 2011 This document contains information proprietary to G4S. Any disclosure or use of this information or any reproduction of this document for other than the specific purpose for which it is intended, is expressly prohibited except as G4S may otherwise agree to in writing.
G4S PID3 User Operation Manual Document Revisions Revision 1.01 1.02 1.03 Date Dec 9, 2010 Dec 16, 2010 Feb 15, 2011 Author Harv Hundal Tina Chu Steve Rosset Description Initial Document Version Added Regulatory Compliance info.
G4S PID3 User Operation Manual Contents 1. INTRODUCTION .................................................................................................................................... 3 2. GENERAL OPERATIONAL DESCRIPTION ........................................................................................ 5 2.1 INITIAL STARTUP AND CONFIGURATION ................................................................................ 5 2.2 LOCATION AND STATUS LOGGING AND REPORTING ...........................
G4S PID3 User Operation Manual 1. INTRODUCTION This document describes operation of the G4S Longitude GPS device. The G4S Longitude GPS device (hereon referred to as the “GPS” device) is one piece of the Longitude offender GPS tracking system and is designed to communicate with a G4S PID3 device. Detailed description of the operation of the PID3 device is covered in a separate manual.
G4S PID3 User Operation Manual The GPS device is a portable device meant to be carried by the offender at all times. The device may be carried in a pocket or it may be clipped on to the strapped‐on PID3 device as shown in Figure 2. Figure 2: GPS device clipped on to body‐worn PID3 device The GPS device is fitted with a rechargeable lithium ion battery. Hence, the offender will periodically need to place the GPS device in a charging cradle as shown in Figure 3.
G4S PID3 User Operation Manual 2. GENERAL OPERATIONAL DESCRIPTION 2.1 INITIAL STARTUP AND CONFIGURATION If the GPS device is initially turned off, placing it in the charging cradle will wake it up from its OFF state. It will then automatically attempt to connect to the monitoring centre server via the CDMA network using the devices default configuration settings. On initial startup, the device always gets updated device configuration settings from the monitoring centre.
G4S PID3 User Operation Manual 2.
G4S PID3 User Operation Manual —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.