WiFi Phone User Manual MIP-200 WiFi Phone User’s Manual v1.00 Firmware V1.
WiFi Phone User Manual Preface ................................................................. iii Regulatory Information ...................................................iii FCC Regulation ........................................................................... iii European regulation ................................................................... iv RF exposure regulation (SAR) ....................................................... iv Overview ................................................
WiFi Phone User Manual Profile Settings ........................................................................... 15 Creating Profiles ................................................................... 15 Editing Existing Profiles .......................................................... 16 Enabling and Disabling Tones .............................................. 16 Display Settings ......................................................................... 17 Setting the Display Name ..................
WiFi Phone User Manual Regulatory Information FCC Regulation Preface Preface This model phone complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
WiFi Phone User Manual European regulation Products with the CE mark comply with the Radio & Telecommunication Terminal Equipment Directive (1999/5/EEC), the Electromagnetic Compatibility Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) - as amended by Directive 93/68/ECC - issued by the Commission of the European Community.
WiFi Phone User Manual Overview Overview Package Contents Charging Cradle (Optional) MIP-200 WiFi Phone Belt Clip AC Adapter Li-ion Battery 1
WiFi Phone User Manual Product Description 1 2 13 16 3 15 14 4 5 6 7 12 11 8 9 10 No. Item 1. Receiver 2. Charge Status 3. LED Display 4.
WiFi Phone User Manual Item Description 5. Right Soft Key • Display the Phone Book • Clear inputs / cancel or Mute during a call 6. Power/Red Key • Power on or power off • End conversation; exit (back) 7. Numeric Key 8. Pound Key 9. USB Jack • Connect mini USB / charger jack 10. Charging Pad • Contact to the charging cradle 11. Microphone 12. 13. Star Key Speaker Overview No. Enter numbers and text • Change text output in text mode. For example: AB, ab, 12, Ab.
WiFi Phone User Manual Getting Started Inserting the Battery To insert the battery into your phone, perform the following steps: 1. Slide off the battery compartment cover. 2. Insert the battery as shown, making sure the gold connectors are correctly aligned. 3. Replace the battery compartment cover until it clicks into place.
WiFi Phone User Manual Use AC power adapter to charge your phone. 1. Connect one end of the AC power adapter cable to the port at the rear of the cradle. 2. Plug the AC power adapter into your mains socket. 3. Place your phone in the cradle and charging begins. We recommend that you charge the battery for three hours before using your phone for the first time. Getting Started Charging Your Phone Turning Your Phone On and Off Press and hold the Power/end key ( ) for two seconds to turn it on.
WiFi Phone User Manual Navigating Phone Menus The LCD Screen See below for an overview of the layout of the LCD screen and its icons: 3 4 5 2 1 Peer2Peer Ready 6 7 16:17 19-Nov-07 7 9 Menu Name 8 The LCD screen elements are described in the table below: No. 6 Indicator Description 1. WiFi signal Displays the WiFi signal strength. The presence of five bars ( ) indicates the strongest signal and the presence of a single bar indicates the weakest signal. 2.
WiFi Phone User Manual 9. Indicator Left Soft Key Description Press the Left soft key ( played command. ) to execute the dis- Getting Started No.
WiFi Phone User Manual The Menu Screen From the main screen, press the Left soft key ( ) to enter the menu screen. Follow these tips to navigate through the menu and menu options. • Use the Navigation Pad ( ) to move around the screen. • The lower bar of the screen displays Select for you to enter the menu item currently selected. • To go back one level in a menu, press the Power/end key ( Use the Navigation Pad ( ). )to select the submenu items and options.
WiFi Phone User Manual Submenu Options Language English as the default language (with as many as six languages) Tone Ring Settings Volume Set Time Time Format Time/Date Phone Settings Getting Started Menu Set Date Date Format Profile Settings New Profile Keypad Tone Audio Settings Range Warning Battery Low Handset name Display Settings Backlight Duration AP Settings Default Master Reset Reset All Settings Firmware Upgrade Upgrade Firmware Select AP Select Network AP Find Select Net
WiFi Phone User Manual Settings the Display Language To set the MIP-200 display language, perform the following steps: 1. Press the Left soft key ( ) to display the main menu. 2. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, go to Phone Settings´ Language. ) to select 3. Select a required language from the provided six languages (English as the default). 4. Press the Left soft key ( ). The display language changes to the selected format.
WiFi Phone User Manual The MIP-200 is suitable for home and office use and the setup procedure is similar, with the addition of Session Initiation Protocol (SIP) for office deployment. The two setup models are outlined below. Typical Home Setup Installation Installation The diagram shows a typical home setup using a local area network (LAN). With the addition of IP PBX connects to a wireless IP or wireless phone. It provides not just Data IP network, but also provides Voice IP network.
WiFi Phone User Manual Basic Setup Basic connection setup between the MIP-200 and Access Point (AP) must be performed for both deployment models described. To setup the MIP-200, perform the following steps: 1. Ensure that the battery is correctly inserted and fully charged before continuing. See “Inserting the Battery” on page 4 and “Charging Your Phone” on page 5. 2. Ensure that the time and date settings are correct. See “Setting the Time and Date” on page 10. 3.
WiFi Phone User Manual From the main screen, press the Left soft key ( ) to enter the menu screen. Follow these tips to navigate through the menu and menu options: • Use the Navigation Pad ( ) to move around the screen. • The lower bar of the screen displays Select for you to enter the menu item currently selected using the Left soft key ( ). • To go back one level in a menu, press the Power/end key ( • Use the Navigation Pad ( ).
WiFi Phone User Manual Editing Contacts To edit an existing Phonebook contact, perform the following steps: 1. Press the Right soft key ( 2. Press the Left soft key ( ) to display the Phonebook screen. ) to enter the Options submenu. 3. Using the Navigation Pad ( items, go to Edit. ) to scroll and the Left soft key ( 4. Using the Navigation Pad ( any necessary changes. ) scroll to either name, SIP, No., or IP and make 5. Press the Left soft key ( ) to select ) to save the modifications.
WiFi Phone User Manual From the main screen, press right on the Navigation Pad ( OR 1. Press the Left soft key ( ), ) to display the main menu. 2. Using the Navigation Pad ( items, go to Call Log. ) to scroll and the Left soft key ( ) to select 3. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, go to Received, Missed, or Dialed Calls. ) to select 4. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, go to the desired entry. ) to select 5.
WiFi Phone User Manual Ringer Volume To set the ringer volume, perform the following steps: 1. Press the Left soft key ( ) to display the main menu. 2. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, go to Phone Settings´ Ringer Settings. ) to select 3. Using the Navigation Pad ( items, go to Volume. ) to scroll and the Left soft key ( ) to select 4. Using the Navigation Pad ( on the sliding scale. ) select the required volume from 0 through 4 5.
WiFi Phone User Manual 5. Press the Left soft key ( ) to save the new profile settings. For more information on SIP, Domain, Out Proxy, and STUN see the AP User Manual. Phone Settings • Set Active—activate the profile you selected.
WiFi Phone User Manual Editing Existing Profiles To edit an existing profile, perform the following steps: 1. Press the Left soft key ( ) to display the main menu. 2. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, go to Phone Settings´ Profile Settings. ) to select 3. Using the Navigation Pad ( ) to select ) to scroll and the Left soft key ( items, go to the profile you want to edit. Note: If no profiles exist, only New Profile is available through this menu. 4.
WiFi Phone User Manual You can set the display name and backlight duration time (in seconds) that the backlight remains on while the keypad is inactive using the Display Settings menu. Setting the Display Name To set the display name, perform the following steps: 1. Press the Left soft key ( ) to display the main menu. 2. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, go to Phone Settings´ Display Settings. ) to select 3. Using the Navigation Pad ( items, go to Display Name.
WiFi Phone User Manual 3. Using the Navigation Pad ( ) to scroll, press the Left soft key ( ) to set the selected AP as the default, and press the Right soft key ( ) to modify AP settings. The AP Settings screen displays the following options: • IP Settings—select DHCP or configure Static settings including IP Address, Subnet Mask, Gateway Address, and DNS Address. • Security Settings—enter the Security protocol.
WiFi Phone User Manual Note: Ensure that the battery is fully charged before starting the upgrade procedure. 1. Press the Left soft key ( ) to display the main menu. 2. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, go to Phone Settings´ Firmware Upgrade. ) to select Phone Settings To upgrade your firmware, perform the following steps: 3. Using a USB to mini-USB cable, connect the MIP-200 to a computer with a presaved firmware file or internet access. 4.
WiFi Phone User Manual 6. Click Finish to exit the wizard when the window displays information about finishing installing the software for DFU (Device Firmware Upgrade) mode. 7. Locate and execute the DFU executable file ( ). A Device Firmware Upgrade window will show up. 8. Locate the DFU file and click Download to upgrade firmware. 9. Detach the USB to mini-USB cable and click Close to exit the window when the window displays Reset complete, please detach device from USB. 10. Turn on the phone again.
WiFi Phone User Manual ) to scroll and the Left soft key ( ) to select 3. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, choose the AP you want to connect to from the list. ) to select A list of local APs displays. 4. Press the Left soft key ( ) to connect to the selected AP. Scanning for APs You can scan the local area for WiFi reception. If reception is good, you can set the AP as default or connect through the Select AP menu. Phone Settings 2.
WiFi Phone User Manual 3. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, choose the desired profile. ) to select Information If the phone is connected to an AP, you can display IP, AP, SIP, Firmware version and MAC address information using this submenu. To display the information page, perform the following steps: 1. Press the Left soft key ( ) to display the main menu. 2. Using the Navigation Pad ( items, go to Information.
WiFi Phone User Manual Wi-Fi Protected Setup (WPS) is a standard for easy and secure establishment of a wireless home network, created by the Wi-Fi Alliance and officially launched on January 8, 2007. The goal of the WPS protocol is to simplify the process of connecting any home device to the wireless network, and so it was first named 'Wi-Fi Simple Config'.
WiFi Phone User Manual Making Calls Dialing Contacts Your MIP-200 WiFi Phone incorporates a Phonebook with a capacity of 50 entries for ease of use. Add, edit, and remove contacts using the Phonebook menu or dial directly from the Phonebook using the Dial Contacts feature. To dial a contact using the Phonebook, perform the following steps: 1. From the main screen, press the Right soft key ( Phonebook, ) to display the OR Press the Left soft key ( ) to display the main menu.
WiFi Phone User Manual To dial a regular number manually, perform the following steps: 1. From the main screen, press the Call key ( 2. Using the Navigation Pad ( 3. Press the Left soft key ( ). ) to scroll to No. ) and enter the desired number using the keypad. Making Calls Dialing Regular Numbers Note: Remember to include the national and international prefixes. 4. Press the Call key ( ) to dial the selected number.
