User's Manual

Please read this user’s guide before
installing, setting up and using your new product
www.radioshack.com
Thank you for purchasing your Compaq
27 MHz RF Wireless Keyboard and Optical
Mouse from RadioShack. This combo is specially
designed for offi ces with up to 4096 ID codes for
the keyboard and 2048 ID codes for the mouse,
so you can use multiple sets in the same offi ce at
the same time. With a single USB connection you
can connect both the keyboard and the mouse to
your computer.
26-762
27 MHz RF
Wireless Keyboard
& Optical Mouse Combo
this user’s guide wireless keyboard
wireless mouse charger / receiver
AC adapter CD (drivers)
2 AA batteries (non-recharageable alkaline)
2 AAA batteries (rechargeable NI-MH)
Installing the Batteries
You can power the mouse with two AAA
batteries, and the keyboard with two AA
batteries.
1 Remove the compartment cover from
both the keyboard and mouse.
2 Insert the AA batteries into the keyboard
and the AAA batteries into the mouse. Be
sure to match the polarity markings.
3 Replace the compartment covers.
Recharging the Batteries
Connect one end of the supplied adapter
to the charger/receiver’s DC port and the
other end to a standard AC outlet. Place the
mouse in the charging stand. The red LED
lights when the batteries are charging. The
green LED lights when charging is complete.
When the batteries in the mouse get low,
the red LED on the mouse fl ashes.
When the batteries in the keyboard get low,
the battery indicator turns red.
DC port
CONNECT
Installing the Windows 98 Driver
Your mouse and keyboard work with
Microsoft Windows 98/2000/Me/XP/NT.
Except for Windows 98, they should work
well without installing the driver. If you are
using Windows 98, be sure to install the
driver before connecting the keyboard and
mouse.
1 Exit all open Windows applications.
2 Insert the supplied CD in your computer’s
CD-ROM driver. Installation instructions
will be displayed on the computer
automatically.
3 Follow the on-screen instructions.
Setting the Channel
The keyboard and mouse offer 2 channels,
CH1 and CH2. The receiver automatically
detects the mouse’s channel. You will need
to change the channel of the keyboard so
the keyboard and mouse are on different
channels. If interference is caused by the other
computers, reset the channel.
To reset the channel on the keyboard, slide
CH1 / CH2 on the back of the keyboard. To
reset the channel on the mouse, remove the
battery compartment on the mouse, and use
a pointed object to slide the switch inside the
compartment to CH1 or CH2. Then replace the
cover.
1 Connect the charger / receiver’s USB cable
to your computer’s USB port.
2 Press CONNECT on the receiver. The
receiver’s indicator lights green.
3 Press the reset key at back of the mouse
and CONNECT on the keyboard.
When you change the channel or replace the
batteries, you will need to repeat steps 2 and
3.
Reset button
CH1 / CH2
Changing the ID Code
To avoid interference with other Windows
desktop sets, you will need to change the
ID code.
1 Use a pointed object to press the reset
button on the back of the mouse and
press CONNECT on the right top of
keyboard to change the code.
2 Press CONNECT on the receiver.
3 Press the reset key on the back of the
mouse.
CH1 / CH2
CONNECT