User's Guide
Contents P01-02 Accessories Details P03 Package Content P04 Quick Start Guide P05-08 User Guide P09 Mouse Technical Parameters P10-14 Driver Introduction
Accessories Details Scrolling wheel Mid-but Mid-button Breathing light Breathing light for wheel DPI up button DPI down button Breathing light switch Battery capacity indicator Programmable side buttons 01 Top surface of the mouse IR sensor USB cable lock Laser sensor Mouse charging connect points Magnet fix point Charging dock connect point aser 50 gL dpi 40 Gami n IR Power Saving Mode switch button for wireless Charging dock (receiver function) C Wired mode USB port Long-lasting foot pad Turbo-
Package Content Quick Start Guide 1* Gaming Mouse X300 Please check if the accessories are complete, and read this 1* Charging Dock (Receiver Function) Fu unction) manual carefully before use. Dual Power Train X300 Gaming Mouse can be used as not only 1* X300 USB Cable 2* X300 Spare Foot Pads 1* X300 Manual wireless mouse but also wired mouse by dual powered.
Programmable side-buttons User Guide The four side-buttons with fault functions: volume up, volume down, forward and backward, they also could be self defined after installing the driver. Top lighting buttons Button function Three top lighting buttons: DPI up button, DPI down button, lighting-switch button Left/Right button —— Turbo-click Unique Turbo-Click technology reaches 1ms reports period and 8-times faster than common wired mouse, to bring you a good enjoy in gaming.
aser 5 gL 0dpi 04 Gam in Dual-sensor switch Under wireless gaming mode, the mouse will switch to laser sensor automatically with accurate location and satisfied performance. Under wireless energy-saving mode, the mouse will switch to IR optical sensor of low power consumption automatically for long battery life.
Technical Parameters Driver Introduction D Mouse Model. Reversion No. Gaming-grade specifications Battery capacity: shows latest battery capacity Tracking Resolution 90-5040DPI Frame rate 11750fps Max acceleration 30G Max speed 150ips(up to 150 inches(3.
Advanced setting contains: Computer status bar There are two icons in status bar after driver installed Battery icon: when mouse pointer moved here, it will show the battery capacity.
Accuracy settings 2 Speed settings for double click: This is for speed of double click, you may take a test with it. 3 DPI settings: This is for customizing DPI. It could be any 90-multiple value between 90-5040. Click setting, there is a dialog box 3 1 4 13 2 14 5 DPI settings by driver is only valid under wired mode and wireless gaming mode, and could not be changed under wireless energy-saving mode. 1 Needle settings for scrolling wheel: This is for needle speed and vertical wheel speed.
Setting switching Driver could reserve two modes, different button functions and dpi content could be set under different modes Settings steps: Driver settings steps: 1. Set the contents by your demand The name of mode could be revised as per your favorite by double clicking, as below: 2. Click “apply” or “confirm” 15 16 If you want to back to reset mode, click “reset” button, then click “apply” or “confirm”. How to switch: 1. Single click mouse icon by right button, the name of modes arise 2.
1, Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment 17 2 , NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.