User Manual

Wireless RF mouse
USB nano receiver
2xAA battery
User guide
Thanks for buying Fuhlen products, please read this user guide carefully before use.
Installation
Switch the On/Off button to OFF
and open the battery cover.
Switch the On/Off button to On. The LED
will flash 1-5 times according to the
remaining battery power.
Insert one or two A A batteries as the
diagram on the battery tray indicates.
Close the battery cover.
Plug the USB receiver into an available
USB port on your computer. Press any
key to start.
The A53G mouse and USB receiver is pre-paired before packing. Users can use it after installing
the battery.
1. Turn on the computer.
2. Plug the USB receiver into an available USB port on your computer.
3. Install the battery into the mouse. Press any key to start.
Set Wireless Connection
If your wireless mouse will not pair with the USB receiver, you will
need to download the Pairing Software tool to your computer from
the Fuhlen website: http://www.fuhlenstyle.com/download.jsp,
and pair the mouse and receiver according to the instruction.
Finished setting the wireless connection of the mouse, you can enjoy the wireless freedom.
Mouse Feature
LED indicator
There's LED indicator under the scrolling wheel. When switching the mode & DPI, or touch on
mouse, or power low, it will flash differently to remind you the status of mouse.
Mode switch
There're three modes for option, the default mode is energy saving mode, you can choose
the mode you like by pressing the G button. The LED will flash different colours according
to different modes.
DPI button
G button
LED
DPI Switch
The mouse has 1000/1500/2000 of DPI for your choice freely. The factory default is 1000DPI.
You can choose the DPI you like by pressing the DPI button, the LED will flash different times
according to the difference DPI, and the new setting DPI will be automatically saved under
different mode.
Touch on wake up
The mouse is with special touch on wake up technology. When your hands leave the mouse
for 2s, it will automatically switch to sleep mode, when you touch on the mouse, it will be
activated and the LED will flash to remind you its working.
Energy-saving mode
The mouse is with energy saving mode, when your hands stop moving the mouse or your
hand leaving the mouse for 2s, it will automatically switch into the energy-saving mode,
which can extend the battery life.
Side Buttons Feature
The mouse is with 2 side buttons. For Windows2000 or above,
the buttons are defaulted as browser forward and backward
buttons. Download the driver, you can also select your
preference features to side buttons.
For more function, please download the driver from the website
of www.fuhlenstyle.com for your self-definition.
Low power indicator
The mouse has low power indicator, when the power is nearly used up,
the LED will flash to remind you to replace the battery. When install
battery, LED will flash, if flash 5 times means remaining power is 100%,
if flash 4times means remaining 75% power, flash 3times means
remaining 50% power, flash 2times means remaining 25%, flash 1time
means low power that you need to replace battery.
Receiver Build-in design
The mouse is with build-in design, when you stop using the nano
USB receiver, it can be stowed away in a hidden compartment inside
the mouse.It is more convenient for storing.
Frequency band: 2402MHz ~ 2479MHz
Power supply: 1.5V
Operation current: ≤6mA(1.5V)
Acceleration: up to 20G
Resolution: DPI 1000/1500/2000 switchable
Energy-saving mode/Precision mode/Gaming mode power
consumption:≤9mW/≤14mW/≤25mW
Ultra Low Power
Battery Disposal
Don’t throw away the batteries into the fire.
After replace the batteries, put them to the right place for recycling.
Mode LED Color Default DPI Speed Remarks
Gaming Mode Purple 1500dpi 500 RPS Full speed for gaming
Precise Mode Red 1500dpi 250 RPS For designing
Energy saving mode Blue 1000dpi 125 RPS power saving for office use
Quick Start Guide
Contains:
DPI LED flash times
1000dpi one time
1500dpi twice
2000dpi three times
DPI Button
LED
K4
K5
LED
DPI button
G button
On/Off button
Specification
Power On/Off
There is power On/Off button at the bottom of the mouse,
if you won't use it for a long time or you have a trip, we'd
suggest you to turn the button off. When you use it again,
you'd just turn it on.
or
反面