DO NOT PRINT THIS PAGE
BLUETOOTH WIRELESS BOOMBOX Bluetooth Wireless Rechargeable Battery FM Radio DSS Dual Speaker Stereo G-850
Welcome to G-PROJECT ™ Thanks for purchasing G-BOOM3 and joining G-Project. For more info, please visit our website at www.gprojectgear.
BLUETOOTH WIRELESS BOOMBOX SPECIFICATIONS Power Adapter AC Input .................................................................................. 100-240V ~ 50/60Hz Power Adapter DC Output ................................................................................................ 12V 1.5A Output Power ...................................................................................................... 2 x 10W <1% THD Battery ..........................................................................
LOCATION OF CONTROLS 1. Power ON / OFF Button 2. EQ Button 3. DSS Button 4. Bluetooth PAIR Button 5. LCD Display 1 2 3 4 6. FM Radio 7. Tune Down Button 8. Play / Radio Preset Button 9.
BLUETOOTH WIRELESS BOOMBOX 10. LED Ring 14. DC IN Jack 11. Volume + Up Button 15. Reset Button 12. Volume – Down Button 16. LINE-IN Jack 13.
POWER SOURCE Connect the supplied AC adapter (DC 12V 1.5A) to the DC IN Jack on the back of G-BOOM3 and plug the other end into a standard wall outlet (100~240V 50-60Hz). NOTES: Disconnect both ends of the AC adapter when not in use. Use only the supplied AC adapter with the following spec: AC In - 100-240V AC, 50/ 60Hz / DC Out - 12V 1.
BLUETOOTH WIRELESS BOOMBOX EQUALIZER (EQ) There are 3 EQ presets: EQ1 = (Default) Dynamic: full bass and crisp high frequencies. EQ2 = Deep: Added emphasis on bass and low mids frequencies. EQ3 = Bright: Added emphasis on mids, vocals and high frequencies. Press the EQ Button repeatedly to cycle through them. The LED ring will flash 1, 2 or 3 times when the EQ button is pressed to indicate preset EQ1, EQ2 or EQ3 respectively.
PLAYING THE RADIO 1 With G-BOOM3 powered “ON”, press the FM RADIO button. The current FM station and FM icon will appear on the display. 2 For manual tuning, repeatedly press the TUNE UP or TUNE DOWN button to manually adjust the tuning on the LCD display until the desired station appears. 3 For auto tuning, press and hold the TUNE UP or TUNE DOWN button until the display starts to scan, then release the button. The tuner will search and stop on the next strongest station signal it finds.
BLUETOOTH WIRELESS BOOMBOX SETTING RADIO PRESETS 1 To preset a radio station to memory, first follow the previous steps to tune in the desired station. 2 Press and hold the PLAY / RADIO PRESET button to create a preset for the current station. “P” will appear and “##” (the preset number) will blink on the LCD display. 3 Press the TUNE UP or TUNE DOWN button to select a preset number (01- 10). Press the PLAY / RADIO PRESET button again to confirm the setting and the station will be saved into memory.
BLUETOOTH OPERATION You can stream audio wirelessly to G-BOOM3 from up to 33’ away using your iPhone, iPad, iPod, Android, laptop, or other A2DP Bluetooth enabled device. 1 Press the POWER ON/OFF button to turn on G-BOOM3. 2 The speaker will be entered to Bluetooth mode. The LED ring will flash blue and Bluetooth icon will light up on the LCD display. . 3 Turn on your compatible A2DP Bluetooth device and enable Bluetooth. 4 Search for Bluetooth devices and select “G-BOOM3”.
BLUETOOTH WIRELESS BOOMBOX RECONNECTING YOUR BLUETOOTH DEVICES Once your Bluetooth device has been paired with G-BOOM3, it is simple to reconnect them. 1 Make sure that G-BOOM3 is powered on and within range. 2 Select “G-BOOM3” from the list on your Bluetooth device. 3 The blue LED ring will change from flashing to solid, indicating that your Bluetooth device is reconnected to G-BOOM3. NOTES: • For best audio performance, turn the volume on your Bluetooth source device all the way up.
DSS (DUAL SPEAKER STEREO) With DSS, you can connect two G-BOOM3s together to stream in stereo to both at the same time to enjoy music with double the power and expanded stereo separation. 1 Power on two G-BOOM3 speakers and switch both to Bluetooth mode. 2 Follow directions to pair and connect a Bluetooth device to one G-BOOM3 (master) 3 Press DSS button on the master G-BOOM3 speaker which is already connected Bluetooth device to enter DSS mode, the LED ring will flash amber.
BLUETOOTH WIRELESS BOOMBOX AUX-IN CONNECTION You can also play audio from other Line-In digital sources using a standard 3.5mm Line-In audio cable (sold separately). 1 Press the POWER ON/OFF button to turn on G-BOOM3. 2 Insert one end of the 3.5mm audio cable into the Line-In jack on the rear of G-BOOM3. 3 Insert the other end of the 3.5mm audio cable into the Line-Out or headphone jack of your external audio device (e.g. iPad, mobile phone, MP3 player, digital media player, etc.
ONE-YEAR WARRANTY Life Lab International Ltd. (hereafter referred to as Life Lab), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. If you are experiencing any problems with the operation or function of your product, please make sure you have reviewed our full owners manual from our website for reference or email us at support@gprojectgear.
BLUETOOTH WIRELESS BOOMBOX FAQs Q: Why can I not pair my Bluetooth device? A: Occasionally the Bluetooth may need to be reset on your G-BOOM3, and/or your Bluetooth streaming device(s). First you will need to go into the Bluetooth settings menu on your audio streaming device and delete / 'forget this device' from the list completely.
IMPORTANT SAFETY NOTIFICATIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
BLUETOOTH WIRELESS BOOMBOX WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISES ET POUSSER JUSQU’AU FOND NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
IMPORTANT SAFETY INSTRUCTIONS Some of the following information may not apply to your particular product; however, as with any electronic product, precaution should be observed during handling and use. 1. 2. 3. 4. 5. 6. 7. 8. Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all Instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
BLUETOOTH WIRELESS BOOMBOX ADDITIONAL SAFETY PRECAUTIONS a. Do not expose this unit or the AC/DC adapter to dripping or splashing water. Keep liquid-filled objects, such as vases, away from this unit and AC/DC adapter. b. To ensure that this unit is completely disconnected, unplug it from the wall. c. Ensure that the AC/DC adapter is easily accessible. d. Please note the information printed underneath the unit. e. Batteries should not be exposed to excessive heat such as direct sunshine, fire, etc. f.
G-PROJECT is a registered trademark of Goodhatch, LLC. G-BOOM3 is distributed by LifeLab International LLC • 3471 North Union Drive, Olney, IL 62450 • (855) 896-1795 The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Life Lab International LTD. is under license. Other trademarks and trade names are those of their respective owners.