User Manual Copyright ⓒ 2019. Lab-T, Inc.
MWT
MWT Introduce MWT(Multimedia & WPC Tester) is a system that checks functionality of Multimedia interfaces (Bluetooth, USB, AUX) and Wireless Power Charger installed within a vehicle.
MWT Component Part Name Part Number Description MWT Module is for checking the functionality of multimedia interfaces such as Bluetooth, USB, AUX and Wireless Power Charger of a vehicle.
MWT Function Power Button To power On/Off MWT module Green Battery LED Status Fully charged Red Charging Off No power Power AC/DC Adapter Power Connecting Port Orange Illumination (Slow) Orange Illumination (Fast) WPC LED Status Green Red Purple When WPC TEST(Auto Mode) is in process, 3 LEDs are blinking at the same time When WPC TEST(Manual Mode) is in process, 3 LEDs are blinking at the same time If WPC TEST fails, LED turns off after 3 seconds illuminating in green If WPE TEST fails, LED tur
MWT Specification Item Description CPU ARM 32bit Cortex-M4 / 168MHZ MCU Memory 256KB Flash Memory 8MB Wireless Bluetooth Interface USB2.0, AUX Charging DC & Wireless charging Battery Li-ion Polymer 1,000mA/h (3.
MWT Connection ◈ Bluetooth Pairing - This step is for pairing the tablet and MWT Module. Step1 Touch MWT button at the bottom [Additional Features -> MWT]. Step2 Press [Refresh] button to search the MWT Module.
Step3 Select the found MWT Serial No. to proceed Bluetooth pairing with MWT. Below message pops up if the pairing is succeed. .
MWT Test ◈ Bluetooth Test - To test the proper operation of Bluetooth functions. Step1 Touch [Bluetooth Test] button. Step2 After set up the audio system of the vehicle as ‘Bluetooth Test’ mode, touch [Refresh] button.
Select the found device, ‘AUDIO DEVICE’. Step4 Enter the ‘PIN Code’.
Step3 Tablet and Vehicle is paired. Touch [Next] button. Step4 Test sound is playing. Press [PASS] button if the sound is properly playing, or press [FAIL] if the sound is out of hearing. Check the volume of the audio system.
◈ USB Test - To test the proper operation of USB Port and its function. Step1 Touch [USB Test] button. Step2 Connect the MWT module and Vehicle with USB Cable as the image, press [Next] button.
Step3 USB Charge Testing is in progress. Step4 Displays the test result of ‘USB Charge’ as below. : Normal charging : Charging voltage is low, or re-check the connection of USB cable. After check the status, touch [Next] button.
Step5 Test sound is playing. Press [PASS] button if the sound is properly playing, or press [FAIL] if the sound is out of hearing. Check the volume of the audio system.
◈ AUX Test - To test the proper operation of AUX Port and its function. Step1 Touch [AUX Test] button. Step2 Connect the MWT module and Vehicle with AUX Cable as the image, press [Next] button.
Step5 Test sound is playing. Press [PASS] button if the sound is properly playing, or press [FAIL] if the sound is out of hearing. Check the volume of the audio system.
◈ WPC Test - To test the proper operation of WPC (Wireless Power Charger) Step1 Touch [WPC Test] button. Step2 Place the MWT module on the WPC (Wireless Power Charger) of the vehicle as the image, touch [Next] button. According to the vehicle model, the location of WPC could be different.
Step3 WPC charging is in testing. Step4 Displays the test result of ‘USB Charge’ as below. : Normal charging : Charging voltage is low, or re-check the connection of USB cable. After check the status, touch [Next] button.
◈ Previous Test History - To check the results of the tested vehicles Step1 Touch [Previous Test History] button. Step2 Search the past records of the tested vehicles.
◈ CAUTION Power supply - MWT must be supplied from a power source of less than 8A, 100VA. Safety when using the battery - Risk of explosion if battery is replaced by an incorrect type. - Dispose of used batteries according to the instructions. FCC Compliance Statement This device complies with Part 15 of the FCC Rules.
