Auto Link App Guide
Contents 1. 2. 3. 4. 5. 6. 7. 8.
1. Introduction About Auto Link Hyundai Auto Link analyzes your driving behaviour and monitors your vehicle for any fault codes. If any problems are detected with the vehicle, it automatically sends diagnostic data to the Hyundai Auto Link application. It also provides a convenient way to book your vehicle in for a service with your Hyundai dealer. Compatibility Only available on iOS and Android smartphones which support Bluetooth® 4.0.
1. Introduction Gathering User Information The Auto Link may collect information regarding the services used and methods to use such services. The following information is included. • Vehicle information: Vehicle Identification Number(VIN), License Plate Number, Odometer(ODO), Date of Purchase.
2. Setup Application Setup Search for “Hyundai Auto Link” in the App Store or Google Play Store and download the application for free. [Note] • Airplane mode must be turned off. • Bluetooth and Location services must be turned on.
2. Setup Terms and conditions To use Hyundai Auto Link you must accept the terms and conditions and confirm Hyundai’s Privacy Policy by pressing the “I accept” button.
2. Setup DIAGNOSIS MODULE – Connect (Step 1) Press the “Start” button on the application to search for the DIAGNOSIS MODULE in your vehicle.
2. Setup DIAGNOSIS MODULE – Searching (Step 2) Once the DIAGNOSIS MODULE is detected and displayed, select it and press the ‘Next’ button. The Vehicle Identification Number (VIN) is automatically detected by the DIAGNOSIS MODULE. If the DIAGNOSIS MODULE is not able to obtain the VIN from the vehicle, retry the setup process or the user may insert the VIN manually.
2. Setup DIAGNOSIS MODULE Settings – Login (Step 3) Link Hyundai Auto Link to the myHyundai account. ① To link to your myHyundai account, check the box and press the “Next” button. Press the “Register” button and follow the instructions to become a myHyundai member. ② Leave the box unchecked and press the “Next” button to skip logging in with myHyundai account.
2. Setup To become a myHyundai member, press the “Register” button and follow the instructions. It is important you are the vehicle owner. After registration, login to myHyundai to complete the setup process as per step ① shown above. Login using myHyundai account details to use the Hyundai Auto Link application. • • • Insert ID /Username and Password to Login to myHyundai. Press ‘Forgotten your password?’ to retrieve myHyundai password Press “Register” button to become a member of myHyundai.
2. Setup DIAGNOSIS MODULE Settings – Information (Step 4) ① Link to myHyundai – The user information will be automatically retrieved from the myHyundai account. Complete the last few fields and press ‘Next ’ to continue.
2. Setup ② Enter your information and press ‘Next’ without linking to myHyundai.
2. Setup DIAGNOSIS MODULE Settings – Submit (Step 5) To complete the setup process, review the details and press the “Submit” button.
3. Screen composition This describes the basic functions available on the Hyundai Auto Link application. * The default screen is the driving information screen. 1 2 4 ① 3 Menu: Allows navigation to other functions. ② Roadside assistance (RSA): Allows the user to call the RSA centre. ③ Hot keys (Bottom): ④ • Back – return to previous screen • Dealer network • myHyundai Home • Message box • Map Main functions: Displays each function of the Hyundai Auto Link application.
3. Screen composition Menu Allows the user to check the login status on the Menu.
3. Screen composition RSA (Roadside assistance) Calls the RSA centre directly if a problem occurs with the vehicle.
3. Screen composition Hot Key (Bottom) Allows easy navigation – Back button, Dealer network, myHyundai home, Message box and Map. 1. Back button Allows the user to navigate back to the previous screen. 2. Hyundai Dealer network Shows Hyundai dealer information on the map.
3. Screen composition 3.
3. Screen composition 4. Message box Shows messages and notification sent from Hyundai. 1 Messages can be deleted as follows: ① Press the button on the upper left corner to activate the Message check boxes ② Check the box next to the message you want to delete. ③ Press the button on the upper right corner to delete selected message/s.
3. Screen composition 5. Map Shows the current location on the map (where the user has activated location services on the smartphone).
3. Screen composition Main page *Consists of three screens containing information about the vehicle. Swipe left or right to switch screens.
4. Remote Control Remote This page explains regarding remote control. You can remote your vehicle by Hyundai Auto Link. All remote functions have to enter the password for the security.
4. Remote Control Remote control will work as the steps below. 1 3 ① ② ③ ④ 2 4 Perform remote control. Enter PIN code. Competed sending remote control order. Remote control result.
5. Main function > 1) Vehicle managem Shows Driving information, Tyre pressure, Driving history, Vehicle health check and Parking management screens. *Swipe the screen left or right to switch screens. Driving Information (default screen) 1 2 3 4 ① Current - Distance: The distance travelled for the current driving trip. - Travel time: The time elapsed for the current driving trip. ② Today - Distance: The total distance travelled for the day’s driving trips.
5. Main function > 1) Vehicle managem Driving information result will display when the engine is turned off after the drive. Driving result will appear when the driving is over 30 minutes (time) or 20Km (distance). The result is decided as the result condition table below. *Result condition table Condition (Driving 20Km or 30min) Good Maximum speed (Under 100Km) O Fuel efficiency (Over 6.
5. Main function > 1) Vehicle managem Tyre pressure Shows the pressure for each of the vehicle tyres. The tyre pressure value will appear after a few minutes of driving.
5. Main function > 1) Vehicle managem Driving history The driving history is sorted by date. Each item consists of Departure Arrive Maximum speed Average speed Average fuel efficiency Fuel consumption Rapid acceleration Hard braking Distance and travel time.
5. Main function > 1) Vehicle managem 1. Check Driving history Shows driving history in the latest order. ① Select the driving type. ② Select the driving history for details. ③ For detailed information, press the 1 2 3 button at the bottom.
5. Main function > 1) Vehicle managem 2. Delete, Share, Change Driving history ① Press the button on the upper left corner to activate the check box. ② Select the box next to the driving history. ③ Press the button to delete the driving history. ④ Press the button to share the driving history. ⑤ Press the button to change the driving type.
5. Main function > 1) Vehicle managem Vehicle health check Diagnoses the vehicle health. If a fault code is detected, it is captured automatically for diagnosis by Hyundai. ① Initiating system inspection • Place the gear lever to “P” position • Turn the ignition ON • When ready, press the button.
5. Main function > 1) Vehicle managem ② Fault code detected The alert notification will appear when a fault code is detected. Press the “Call” button to call the favourite dealer and make a reservation for vehicle maintenance. * When a fault code is detected, the diagnosis data will be sent to Hyundai for vehicle maintenance.
5. Main function > 1) Vehicle managem Parking management Provides the parking management of the user’s vehicle through parking location, time setting and uploading parking photos by using locations services on the user’s smartphone.
5. Main function > 2) Book a service Book a service A convenient way to book a service for the vehicle.
5. Main function > 3) Customer care Customer care Provides easy access to Customer care, browse FAQs, complete an online request or call customer care directly.
5. Main function > 3) Customer care Emergency assist Notifies pre-registered recipients of location and information when a ‘Crash Signal’ is detected on the vehicle’s BCM. ① Explanation on Emergency assist service. ② Settings provide RSA No., contact, Rescue message. RSA number is displayed as default. User may add up to 5 phone numbers. Press to load contacts from the phone. Rescue message can be specified through edit. If not, the default phrase will be sent.
5. Main function > 3) Customer care ③ ④ When a crash signal is detected, a notice pops up and counts 15 seconds before message transfer. A message example.
5. Main function > 3) Customer care Accident assist Records the event of an accident or breakdown to save on the smartphone.
5. Main function > 3) Customer care The event • Date – Date and time can be set up by pressing the icon • Location – Location can be set up by pressing the icon • What happened? – provides drop down menu to select the event.
5. Main function > 3) Customer care At the scene • Other drivers and vehicles – save other drivers and vehicle information. • Other people involved – save other people who are involved in the event. • Add photo – take a photo to save the scene by pressing the button.
5. Main function > 4) myHyundai myHyundai Opens the myHyundai portal.
5. Main function > 4) myHyundai Vehicle health report Provides report on the vehicle health. ① Select the report item for details. ② Press the button to check the full detail of the diagnosed items.
5. Main function > 4) myHyundai Provides statistics of the user’s driving pattern that can be viewed in daily, weekly or monthly. Swipe the screen left or right to show Statistics (ECO Driving) or Statistics (Speed). Statistics (ECO Driving) Provides statistics of the user’s driving pattern, results can be viewed in daily, weekly or monthly. 1 4 2 3 ① Statistics grouped: Daily, Weekly or Monthly.
5. Main function > 4) myHyundai Statistics (Speed) Provides statistics of the user’s driving pattern, results are grouped in daily, weekly or monthly. 1 2 3 ① Statistics Period Types: Daily, Weekly and Monthly. ② Driving Pattern Analysis : Less than 40 km/h, ~80 km/h, ~120 km/h, ~160 km/h, over 160 km/h ③ Driving Pattern Analysis : Maximum Speed, Average Speed, Maximum RPM and Average RPM.
5. Main function > 4) myHyundai New car Provides new car search and quotation comparison on myHyundai website .
5. Main function > 4) myHyundai Demo / Pre-owned cars Provides used car search and quotation comparison on myHyundai website .
6. Configuration The user can check the Auto Link information such as Module setup, User Information, Driving type, Application settings, Program version, Unit Settings, User guide, and Module diagnosis.
6. Configuration Module setup Turn the engine on and press the ‘Start’ button to begin the module search. Select the detected DIAGNOSIS MODULE and press ‘Next’ to start the vehicle information retrieval step.
6. Configuration User information Shows the user’s information. ① Only partial user information can be modified when linked to myHyundai. ② All user information except VIN can be modified if not linked to myHyundai.
6. Configuration Driving type Function to enable and select driving type. ① Enable/disable driving type display. Driving type will be displayed on driving information when enabled. ② Select the driving type as Private or Business.
6. Configuration Application settings Provides application settings for Driving history, Emergency assist service, and Notification settings. ① Enable/disable displaying driving history. ② Enable/disable saving driving history. ③ Enable/disable displaying Emergency assist service notification. ④ Enable/disable receiving notifications.
6. Configuration Program version Provides program version information • Resource version • Module firmware version • Module database version • Last successful data connection.
6. Configuration Unit settings Set the units for Fuel efficiency and Tyre pressure in the application.
6. Configuration Module diagnosis 1. Provides a self-test function to check modules operation. ① ② ③ ④ Press button in the Bluetooth section to check the Bluetooth function with the DIAGNOSIS MODULE. Press button in the Communication section to check communication between vehicle and DIAGNOSIS MODULE Press button in the Software update section if you want to perform software update on the DIAGNOSIS MODULE.
6. Configuration 2. The result of module diagnosis will be displayed in red color if it fails ① ② ③ Press the button on the Bluetooth and Communication section. Solution will be displayed on the Auto Link application. Follow the instruction and check the connection again by pressing the button. Press the button on the Software update section if the problem still remains.
7. Appendix The Hyundai Auto Link Module is covered by your vehicle’s 5 year limited warranty in accordance with the terms, and as published in, the owner’s manual for the vehicle. Your vehicle’s limited warranty does not cover the Hyundai Auto Link application which is provided to you on an “as-is” and “where-is” basis. In addition, Hyundai cannot promise uninterrupted or problem-free service, and cannot promise that the data or information provided to you will be complete, current or error-free.
7. Appendix DIAGNOSIS MODULE specifications Item Specifications Product Scan Tool Model DPD-101 CPU ARM 32-bit Cortex-M4 @ 168MHz CPU Memory 2MB Flash memory 8MB Bluetooth protocol Frequency range Output power Operating voltage Sensor Bluetooth 4.
7. Appendix Compliance Statement The Device complies with part 15 of the FCC Rules, US. Operation is subject to the following two conditions: (1) The Device may not cause harmful interference, and (2) the Device must accept any interference received, including interference that may cause undesired operation. CAUTION : Any Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
7. Appendix Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. This product is CE marked according to the provision of the RE Directive (2014/53/EU). G.I.T., Co., Ltd.
8. FAQs The DIAGNOSIS MODULE can not be detected The main cause of this problem is that either the DIAGNOSIS MODULE is not connected to the OBD port or Bluetooth is turned OFF. Please check your module in accordance to the following instructions. 1. Check smartphone settings. Make sure Airplane Mode is turned OFF. Make sure Bluetooth is turned ON. 2. Check connection between the DIAGNOSIS MODULE and the OBD port. Also, check if the ignition is on or the engine is running.