User's Manual

Quick start guide
Cellular trail
camera
Models:
Mini-LIVE
Mini-LIVE-4G
Mini-LIVE-4GV
Mini-LIVE-CV
In the box
1
2
3
5
4
Components
Note: Memory card and batteries are sold separately.
* Mini-LIVE and Mini-LIVE-4G only
Included for United States, Canada and United Kingdom only
Navigation buttons
Microphone
(Mini-LIVE-4G,
Mini-LIVE-4GV and Mini-LIVE-
CV)
Power button
12V/Solar panel jack
USB port
SIM card slot
(Mini-LIVE and
Mini-LIVE-4G)
SD card slot
Built-in speaker
(Mini-LIVE-4G,
Mini-LIVE-4GV and Mini-LIVE-
CV)
Photo lens
Invisible LEDs
Test light
Battery case
Detection lens
Mounting bracket
Slot for installation strap
Tripod mount
Cable lock hole
BUSY LED
Viewing screen
1
2
3
4
5
6
7
8
9
10
11
12
9
10 11 12 13 14
13
14
15 17 1916
18
15
16
17
18
19
3. INSERT THE MEMORY CARD
Insert an SD/SDHC memory card (up to 32
GB capacity) in the card slot, gold contacts
facing up. The card is inserted correctly
when a click is heard.
Before inserting or removing a memory
card, always turn off the camera to
prevent loss or damage of the photos already
recorded.
4. INSERT THE SIM CARD (MINI-LIVE AND MINI-LIVE-4G)
A SIM card is required to use cellular
functions. Carefully insert a SIM card in the
card slot, gold contact area facing down.
The card is inserted correctly when a click
is heard.
Before inserting or removing a SIM
card, always turn off the camera.
5. INSTALL THE CAMERA WITH THE SUPPLIED STRAP
Recommended installation height: about 3 feet above the ground.
Do not place the camera facing the sun.
1. Insérez l’extrémité de la courroie dans la fente
qui se trouve au dos du mécanisme.
2. Insérez la courroie dans la fente sous le levier
et faites-la ressortir en arrière.
3. Créer une tension sur la courroie en la tirant vers
la droite, puis rabattez vers la gauche le levier pour
maintenir la position.
1. REMOVE CAMERA FROM THE
MOUNTING BRACKET
A. Push the tab to release the camera from
the mounting bracket.
B. Remove the camera.
2. CHOOSE A POWER SOURCE
In order to get best results and longer battery life, we recommend
the use of an external 12V source. For easier access to the 12V jack,
remove the camera from the mounting bracket before plugging a 12V
cable. Then, the camera can be reinstalled in the mounting bracket.
Rechargeable AA batteries are not recommended.
Getting started
6
8
7
A.
B.
• Lithium battery pack
LIT-09/LIT-C-8
• 6 alkaline AA
batteries
• 12V power source
v1.4
1-888-779-7646
support.spypoint.com



[e-mail]
Installation
strap
USB
cable
Camera
Quick start
guide
SIM card*




Mounting
bracket
2
1
Using your ngers, push down on each side of
the battery compartment's tab to open it.
The battery compartment adapts to
SPYPOINT LIT-09 lithium battery pack or
6 AA alkaline batteries. Therefore, it is important
to be careful while inserting AA batteries.