GG Telecom BluetoothHandsfreeKit GG Telecom ALSO KNOW AS < R1 / RX-1 / RX-7 / GX-7 / MZ-1 / MX-5 / TX-5 / TX-7 >
Welcome Thank you for purchasing the R1 Bluetooth Handsfree Kit. This guide contains instructions for setting up and using the new Handsfree kit. Please refer to the Safety Information in this booklet for important product safety information prior to the use of the product. Getting Assistance The GG Telecom Assistance Center is ready to assist you. You can find answers to frequently asked questions, ask a question using email, receive service over the Internet, or speak directly with a representative.
Using It As A Portable Speakerphone. BluetoothHandsfreeKit Product Overview Charging Port Speaker Detachable Clip Microphone You can detach the clip and place it in your shirt pocket. Use it as a speakerphone during a conference call. Pairing Volume Down Button / (Redial) Before you use the Handsfree Kit for the first time, charge with the supplied charger for 6 hours or until the Red light diminish.
Redial A Call Increase / Decrease Volume BluetoothHandsfreeKit Pairing Enter Bluetooth Passkey: 3-4.Enter the Pincode/ Passkey “0000”. 0000 Cancel 4. Once pairing is successful, Handsfree Kit will voice prompt ”Pairing Successful”. Note : After pairing, some devices will autimatically connect to your Handsfree Kit, and some will not. You can manually select connection from your mobile phone. Long press the Volume down button when your Handsfree Kit is connected to your Bluetooth mobile phone.
How To Connect To Two Mobile Phone Simutaneously?? 1. Turn the Handsfree Kit off and turn it on, the Handsfree Kit will connect to both of your mobile phones automatically. BluetoothHandsfreeKit What is MobileConferencing™ ?? 2. Establish the Bluetooth connection via your mobile phone. Please refer to your mobile phone user manual to connect your device.
Safety Information Potentially explosive atmospheres For safety reason, turn off your electronic device when surrounded by possible explosive atmosphere. It is rare, but your electronic device could generate sparks which can cause and explosion or fire. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. Explosive atmosphere may include gas stations, fuel or chemical storage facilities, and in environment where metal powders, grain are contained in the air.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.