USER MANUAL Model: C2 GSM Mobile Phone FCC ID:Z3JC2 -1
1 1.1 1.2 1.3 2 2.1 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 4 4.1 4.2 4.3 4.4 4.5 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6 Content General Information ..................................................................... 3 Profile ............................................................................................. 3 Safety Information .......................................................................... 3 Safety warning and Attentions ........................................................
1 General Information 1.1 Profile Please read this pamphlet carefully in order to make your phone in perfect condition. Perfectly combining humanized design and fine art, this mobile phone provides a streamlined outlook, comfortable hand-feeling, pleasant sounds and MP3 player which bring convenience and fun to your work. Our company may change this mobile phone without prior written notice and reserves the final right to interpret the performance of this mobile phone.
a place susceptible to explosion, such as an oil station, oil tank, chemical plant or a place where a blasting process is under way. ¾ OBSERVE ALL SPECIAL REGULATIONS Follow any special regulations in force in any area such as hospitals and always switch off your phone whenever it is forbidden to use it or, when it may cause interference or danger.
Precautions This mobile phone is well designed with fine art. Please exercise special care when using it. The following suggestions will help your mobile phone survive the warranty period and extend its service life: ¾ Keep the mobile phone and all its fittings beyond children's reach. ¾ Keep the mobile phone dry. Keep away from rain, moisture, liquid or other substances that may corrode electronic circuits.
End key Press it to end a call being dialed or end an ongoing call; or press it to exit the menu and return to the standby state; or hold it for two or three seconds to power on or off the mobile phone. Direction key Press them to scroll the options when browsing a function list. In edit state, press direction keys to navigate. In standby state, press a direction key to enter the specified function page. You can also customize direction keys to match the desired functions.
messages data. Note: After powering off your mobile phone, wait for a few seconds before removing or inserting an SIM card. Exercise caution when operating an SIM card, as friction or bending will damage the SIM card. Properly keep the mobile phone and its fittings such as the SIM cards beyond children's reach. Installation Hold the End key for a while to power off the mobile phone Push the back cover above the battery and remove it. Pull the left battery buckle outward and then lift the battery away.
you need to input the PIN each time when you power on your mobile phone. The SIM card will be locked if you input wrong PIN code for three times. Unlocking methods as follows: -Input the correct PUK according to the screen tips to unlock the SIM card. -Then input the new PIN and press the OK key. -Input the new PIN again and then press the OK key. -If the input PUK is correct, the SIM card will be unlocked and the PIN will be reset.
children for fear that children swallow it! 3.3 Charging the Battery The lithium battery delivered with the mobile phone can be put into use immediately after being unpacked. A new battery will have maximum performance after the first three full charge/discharge cycles. Battery level indication: Your mobile phone can monitor and display the battery state. Normally the remaining energy of the battery is indicated by the battery level icon at the upper right corner of the display screen.
configuration, signal strength, ambient temperature, chosen functions or settings, phone fittings, and the voice, data or other application mode you choose to use. To guarantee the optimal performance of your battery, please stick to the following rules: Use only the battery provided by the vendor. Otherwise, damages or even injuries could be caused during the charging. Power off the mobile phone before removing the battery.
Input the PIN and press the OK key if the mobile phone prompts you to input the PIN. The PIN is provided by the network operator for new opening SIM card. Enter the standby interface. To power off the mobile phone, hold the End key for a while. 3.5 Linking to the Network After the SIM card and the mobile phone are successfully unlocked, the mobile phone automatically searches for an available network. After finding a network, the mobile phone enters the standby state.
Note: If the caller can be identified, the mobile phone will present the calling number. If the calling number exists in the phonebook, the mobile phone will present both the name and the phone number of the caller. If the caller cannot be identified, the mobile phone will present the calling number only. You can answer an incoming call when using a function list or browsing the phonebook.
Key Character or Function Number key 1 1 Number key 2 Number key 3 ABCabc2 Number key 4 Number key 5 GHIghi4 Number key 6 Number key 7 MNOmno6 Number key 8 Number key 9 TUVtuv8 Number key 0 * key 0 # key Press it to switch between input methods Left direction key Press it to move to the left DEFdef3 JKLjkl5 PQRSpqrs7 WXYZwxyz9 Press it to input a symbol -13- Remarks
Right direction key Press it to move to the right Left soft key Equivalent to OK or Options Right key Equivalent to Back or Clear End key soft Press it to return to the standby interface English input: Each key is used to represent multiple characters. Quickly and continuously press a key till the character you want appears. Input the next character after the cursor moves.
to it). Missed Calls You can view a list of the latest missed calls. Note: When the mobile phone indicates that some calls are missed, you can select Read to enter the missed calls list. Navigate to a missed call and then press the Dial key to dial the number that originated that call. Rejected calls A list of calls you’ve rejected. Delete all You can delete the latest call records.
the camera to the picture and then press OK key, which the picture will be stored in the album. Select “option” and you can set some parameter of photo and camera, and scan the pictures you’ve taken in gallery and view the storage status. Video recorder This function enables you to record dynamic pictures. Adapt the VCR to the scene or the figure, the press OK to start or pause recording. Press STOP to end recording, and the phone would save the file automatically.
mobile phone is powered on for the first time or when you have not changed the directory, the root directory contains the default folders only. You can use this function to format all the data in the memory. The system will re-create a default folder. The formatted data cannot be recovered. Therefore, think twice before using the formatting function. 5.3 Phonebook The mobile phone can store up to 500 telephone numbers.
phone may give a prompt message indicating that the short message has been sent. This indicates that the mobile phone has sent the short message to the short message service center number set in the mobile phone but does not imply that the destination user has received the short message. For further information, consult the service provider 5.5.1.1 Writing message From the main menu select “Messages” to create text message or MMS.
keep track of important appointments, etc. Days with events entered will be marked. B-tooth ¾ Open B-tooth: To activate or deactivate B-tooth as needed. ¾ B-tooth visibility: To set B-tooth visibility as show phone or Hidden. ¾ Paired device: To inquiry new devices automatically. ¾ My B-tooth name: to set a name of your B-tooth ¾ B-tooth file location: It is stored in memory card only. ¾ Help: Provide some help information. Ebook reader Ebook enables you to read TXT file.
registered. Divert calls: This network function enables you to forward incoming calls to another number you have previously specified. Restrict calls Call barring function enables you to bar calls as needed. When setting this function, you need to use a network barring code, which can be obtained from the network operator. If the code is wrong, an error message will be prompted on the screen. After selecting a call barring option, continue to select Activate or Deactivate.
type. Language: Select the display language for the mobile phone. Schedule power on/off: Set the time when the mobile phone will be automatically powered on or off. Alert: Before entering an area where the use of mobile phones is forbidden, make sure that the scheduled power-on function is deactivated to avoid accidents. Power management: Show the remaining battery level. Display Select images and set them as wallpaper and idle display. You can set duration of backlight and keypad light.
5.8 Pastime A game named Box man is embedded in the phone, you can refer to ‘Help’ option embedded in the phone for operation. Games settings: You can turn on or turn off Audio or Vibration and modify volume as needed. 5.9 Service This function enables you to view the internet. Your phone will ask you with existed way. You can start to view only by starting corresponding way. You can store a website of home page in each way. The home page will be first viewed when using WAP explore.
be effectively transmitted nearby a high building or in a basement. Line congestions occur when you use the mobile phone in high-traffic hours Avoid using the mobile phone in high-traffic hours The mobile phone cannot be powered on The battery energy is exhausted.
network The mobile phone is not in a service area of the GSM network The battery cannot be charged Move to the network operator's service area The signal is weak The charging voltage does not match the voltage range indicated on the charger An improper charger is used Move to a place where the signal quality is high Ensure the charging voltage matches the voltage range indicated on the charger Use the charger specially designed for the mobile phone Ensure the charger plug is in good contact with the mob
Caution: Use the mobile phone in the environment with the temperature Between-10℃ and 50℃; otherwise, it may damage your phone.It can be Operating under 2000m。 For the following equipment: GSM Mobile Phone Is in compliance with the essential requirements and other relevant Provisions of Directive 1999/5/EC. The equipment was passed. The test was performed according to the following European standards: EN 301 489-1 V1.8.1 :2008 EN 301 489-7 V1.3.1: 2005 EN 301 511 V9.0.
Only can use adapter as below:Adatper mfg: HUIZHOU BYD ELECTRONIC LTD. Adapter model:G18:100-240V,50/60Hz,0.1A,O/P 5V,0.
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
RF Exposure I nformation: FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the body with the minimum separation distance of 1.5cm is 0. 506W/ kg, next to the head is 0.549W/ kg. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules.