SDS

Date of issue/Date of revision
: **
*
Date of previous issue : 9/22/201
7
Version : ***
1 /11
FVP HIGH TEMP GREASE
SAFETY DATA SHEET
GHS product identifier
Synonyms
: FVP High Temp Grease
: Lubricating grease
Material uses : Lubricating grease
Code : FVPHTRG-14
MSDS # : 665682XXX
Supplier's details : Factory Motor Parts
1380 Corporate Center Curve, #200
Eagan, MN 55121
866-387-3343
Emergency telephone
number (with hours of
operation)
: INFOTRAC 1-800-535-5053
24 hr. Emergency
OSHA/HCS status : This material is considered hazardous by the OSHA Hazard Communication Standard
(29 CFR 1910.1200).
Classification of the
substance or mixture
: AQUATIC HAZARD (LONG-TERM) - Category 4
GHS label elements
Signal word : Warning
Hazard statements : May cause long lasting harmful effects to aquatic life.
Injection of pressurized hydrocarbons can cause severe permanent tissue damage.
Initial symptoms may be minor.
Precautionary statements
General : Avoid contact with eyes, skin and clothing. Thoroughly wash exposed areas and
clothing with soap and water. IF IN EYES: Rinse cautiously with water for several
minutes. IF SWALLOWED: Do not induce vomiting. If you feel unwell, seek medical
attention and show the label when possible. Keep out of reach of children.
Prevention : Avoid release to the environment.
Response : Not applicable.
Storage : Store in a dry place and/or in closed container. Store in accordance with all local,
regional, national and international regulations.
Disposal : Dispose of contents and container in accordance with all local, regional, national and
international regulations.
Hazards not otherwise
classified
: Injection of petroleum hydrocarbons requires immediate medical attention.
Substance/mixture
Other means of
identification
: Mixture
: Lubricating grease
CAS number/other identifiers
CAS number : Not applicable.
Section 3. Composition/information on ingredients
Section 2. Hazards identification
Section 1. Identification

Summary of content (11 pages)