Operation Instructions

ManualsBrandsFuzhou Soarfree Information Technology ManualsElectronicsElectronic Price Tag-Relay

BASE STATION OPERATION INSTRUCTIONS

SF-E3B

一． Outline

A repeater is a connecting device on the physical layer of a network. It is suitable for the

interconnection of two kinds of networks. Its main function is to expand the distance of network

transmission by resending or forwarding data signals. SF-E3B as the AP node of price card, the

maximum mount quantity is 1500. The relay has dual terminal power supply, which supplies power

for POE and VIN respectively, and the corresponding light will be on when connecting.

Base station connection service:

1. Connect Gateway

2. Login management

3. Configuration information

4. Save app

二． Connect Gateway

Router default name: SFE3B_（The number after SN）

Summary of content (5 pages)

PAGE 1
BASE STATION OPERATION INSTRUCTIONS SF-E3B 一． Outline A repeater is a connecting device on the physical layer of a network. It is suitable for the interconnection of two kinds of networks. Its main function is to expand the distance of network transmission by resending or forwarding data signals. SF-E3B as the AP node of price card, the maximum mount quantity is 1500.
PAGE 2
三． Login management interface Use the browser to login the background management interface Website: e3b.sifei.info Default account number: sifeiroot 四． Configuration information 4.1 Working mode setting Sifei gateway -》Service settings -》Working mode When using network cable: 1. Wired mode. When using wireless: 1. Wireless relay. 2. Fill in the information of the superior router to be connected.
PAGE 3
4.2 Service information configuration Sifei gateway-》Service settings Service -》configuration Service ID: Branch ID Service IP: the IP address of the service carrying computer 五． Key function Restore factory settings: in the case of power on, press the reset button for 10 seconds to release. Non power off restart: press the key for 1 second to release.
PAGE 4
6.2 Base station cascading Base station cascading requires no network segment conflict, and the base station defaults to 16 network segments. The next level base station needs to use non-16 network segment.
PAGE 5
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.