Operation Instruction

RS8426D3 Operation Instruction
I. Main Functions:
1. Six function keys: SET, ALARM, LCD, UP/CH, DOWN/CF, SNOOZE.
2. 12/24 hour selectable.
3. Day of the week in 7 languages.
4. °C/°F selectable
5. Indoor temperature range: 0℃--+50℃
6. Outdoor temperature range: -20℃ --60℃
7. Outdoor temperature with RF: up to 3 channels
8. Double alarm function
9. Snooze function, ring again after 5 minute later
10. DST function
11. LCD brightness adjustment
II. Key Function:
SET Up DOWN/CF SNOOZE ALARM LCD
standard mode
Click Switch display Switch RF
channel
°C/°F
switchable
Backlight on On/ off alarm -----
Hold enter into
time setting
Clear RF data ----- ----- ----- Enter into LCD
Brightness setting
Time set
Click Confirm the
Setting
one step
forward
one step
backward
----- ----- -----
Hold enter into
time setting
8steps/second
forward
8steps/second
backward
----- ----- -----
Alarm set
Click Confirm the
Setting
one step
forward
One step
Backward
----- ----- -----
Hold enter into
time setting
8steps/second
forward
8steps/second
backward
----- ----- -----
III. Instruction of Operating
3.1 Normal states
1. Click “SET” key to alarm mode.
2. Hold “SET” key to enter into setting mode
3. Press “UP/CH” key to switch RF channel, sequence: CH1CH2CH3.
4. Hold “UP/CH” key to clear out all data of current channel
5. Click “DOWN/CF” key to switch between °C/°F
6. Hold “LCD” key for 2 seconds to adjust LCD brightness setting, total 8 levels.
7. Click “ALM” key to switch the alarm on/off
8. When alarm is ringing, click “SNOOZE” key once to enter into snooze state,
the alarm will ring again after 5 minutes
3.2 Time setting
1. Hold “SET” key for 2 seconds to enter into time setting
2.
The setting item will flash 1 HZ
3. The sequence of time setting: 12/24HROFF/SETHourMinuteLanguageYearMonthDateExit
4. Press “SET” key to confirm the setting.
5. Press “UP/CH” key one time, the setting will go forward one step; hold the key for 2 seconds, it will run forward by 8
Function
Operation