User's Manual

RS3312DC3 Manual
1.0 Main Features：
Ø The 6 function keys：SET， ALM，LCD，▲/CH，▼/CF/WAVE， SNZ
Ø The choice for 12/24 hours
Ø That is three weeks
Ø Is the temperature display format selection (°C/°F)
Ø The indoor temperature display, detection range 32℉--122℉
Ø RF is the outdoor temperature, detection range -40℉--140℉
Ø The signal is RF maximum receive 3 channels
Ø The 3 outdoor temperature display channel
Ø The dual alarm alarm
Ø The Snooze function, 5 minutes delay alarm
Ø Is the receiving system -WWVB
Ø The daylight savings time function
2.0 Button function：
function
operation
SET
▲/CH
▼
/CF/WAVE
SNZ ALM LCD
Standard
mode
Single click Toggle display
Switching RF
channels
C/F switch ----- Switch AL
P/M/C/E
Time Zone
Selection
HOLD Entry settings Clear RF data
Mandatory
access to
RCC
----- ------
Go into
LCD light
and dark
settings
time
setting
Single click
Determine
settings
Single step
forward
step
backward
----- ----- -----
HOLD -----
8 steps per
second
8 steps / sec
retreat
------ ----- -----
Alarm
setting
Single click
Determine
settings
Single step
forward
step
backward
----- ------ -----
HOLD -----
8 steps per
second
8 steps / sec
retreat
----- ----- -----
3.0：Operating instructions：
A．Common mode：
Ø A single press "SET" key display ALARM time
Ø A long press "SET" to enter setup mode
Ø The single "/CH" button to switch according to the different channels of RF, the order of CH1 >
CH2 > CH3 > cycle...
Ø A long press "/CH" button to clear the display channel data, and enter the RF long reception mode
Ø A single C/F switch according to "you /CF/WAVE" button
Ø According to "you /CF/WAVE" is more than 2 seconds into the RCC receiving mode