User's Manual

MODEL: TX3
Operation Instruction
z Outdoor Part:
1. Channel Switch: Change the channel Ch1,ch2,ch3.
2. C/F: Change the temperature between C and F.
3. Test : Teansite a test single.
z Indoor Part:
I. Main Functions:
4. seven languages to show the day: English, Germany, French, Italian, Spanish, Dutch, Danish
5. indoor temperature range: 0℃--50℃, sampling cycle: 12 seconds
6. outdoor temperature with RF: up to 3 channels
7. indication of the comfort index
8. the function of Alarm/ Snooze
9. moon phase
II. Power-On and reset
1. When Power-On and reset, LCD full display for 3 seconds Æ enter the normal state after “Beep” Æ check temperature
2. The calendar defaults 0:00 January 1, 2004
3. Alarm defaults 0:00
4. Temperature scales defaults Celius degree ℃. Time system defaults 24Hr.
III. instruction of operating the KEYS
3.1 Key functions
Six functional keys: Set, ALM, Up, Down, Snooze, Alert;Channel
Set ALM ALERT UP Down Snooze Channel
Click ----- Alarm
on/off
On/Off
temperature
Alarm
12hr/24hr
switchable
°C/°F
switchable
enter into
snooze
state
Switchable
between
CH1, 2, 3
standard mode
Hold enter into
clock setting
enter into
alarm setting
Enter
temperature
alert range
setting
----- ----- ----- clear current
registered ch
Click Confirm the
setting
----- one step
forward
one step
backward
----- -----
Time set
Hold ----- ----- 8steps/second
forward
8steps/second
backward
----- -----
Click ----- confirm the
setting
one step
forward
One step
backward
----- -----
Alarm set
Hold ----- ----- 8steps/second
forward
8steps/second
backward
----- -----
Click ----- ----- Confirm the
Setting item
one step
forward
one step
backward
----- Choose the
channel
Temp alert set
Hold ----- ----- 8steps/second
forward
8steps/second
backward
----- -----
3.2 Normal states
1. hold “Set” for 2 seconds to enter into time setting
2. click “ALM” to switch the alarm on/off
3. hold “ALM ” for 2 seconds to enter into Alarm setting
4. Press “ALERT”key to switch temperature alert on/off
5. Hold “ALERT”key 2 seconds to enter temperature alert setting
6. click “Up” to switch between 12hr/24hr
7. press “Down” to switch between °C/°F
8. when ALARM rings, click “snooze” to enter into the snooze state every 5 minutes
9. press “Channel” to switch RF channel, CH1 ÆCH2ÆCH3
10. hold “Channel” key for 2 seconds to clear out all data of current “Channel”
3.3 Temperature alert setting
1. Hold”ALERT”2 seconds into ALERT setting
Function
Operation