Instruction Manual

Instruction Manual

1. Product introduction

1) Features:

◆ Time, date, temperature, can automatically switch display, you can also manually lock the display time,

temperature.

◆ Support wireless charging

◆ Working voltage: DC 5V/2A

◆ Perpetual calendar from 2000 to 2099, a total of 100 years.

◆ 12/24 hours: 12/24 hour conversion is possible, default 24-hour system, January 1, 2016, 12:00

◆ Three groups of alarms, each group is 1 minute long

◆ The voice switch is freely adjustable (press the Down button)

2) General product configuration

Tips: When you open the product packaging, please check if there are the following accessories in the box:

◆ One digital clock

◆ One instruction manual

◆ 2A USB cable

2. Main technical parameters of the product

◆ This product is directly equipped with power adapter, INPUT: AC100-240V-50/60HZ, OUTPUT:

5V-2000MA

◆ Wireless charging: power 5W, output voltage 5V, charging current 600-750MA

◆ Bluetooth speaker:

Version: Bluetooth V4.1

Wireless transmission distance: more than 10 meters

Transmission power: CLASS 3, 0dbm

Sensitivity: -80dBm<0.1%BER

Frequency range: 2.402GHz-2.480GHz

Audio performance SBC decoding

Audio signal to noise ratio: ≥75dB

Speaker impedance 4 ohms

Speaker power 3W*2

3. Display and button introduction

1) Display function description

PAGE 1
Instruction Manual 1. Product introduction 1) Features: ◆ Time, date, temperature, can automatically switch display, you can also manually lock the display time, temperature. ◆ Support wireless charging ◆ Working voltage: DC 5V/2A ◆ Perpetual calendar from 2000 to 2099, a total of 100 years.
PAGE 2
) Button introduction Other introductions: 1. Display mode: There are two display modes, press the button “SET”, you could change the mode of display; Dp-1: time, temperature and year, month and day display would change orderly (Carousel mode) Dp-2: only time, temperature display (Fixed mode) 2. Voice Mode (power-saving mode): Press the button “DOWN”, on: Sd”←→”--:Sd”; “on: Sd” means sound control in on; “--: SD” means sound control is off.
PAGE 3
SETTING INSTRUCTION Press the button “SET” (While the numbers flashing), you would enter into the setting mode. And the setting order are as follows: 1. Setting of Date When entering the set mode, the letter flashing setting order “Year” “Month” “Day”, press button “UP” or “DOWN” to change the number. 2. 12H/24H Setting After finishing the setting of date, you would enter into the12H/24H Setting mode while you press “SET”, and also you could change the 12H/24H through pressing the “UP” and “DOWN”.