User's Manual

ManualsBrandsFuzhou Ewetime Electronic ManualsElectronicsOutdoor Sensor

1.Controls and displays:

1. Time display

2. Weekday

3. Calendar

4. Alarm Clock and Snooze icons

5. Rainfall display

6. Rainfall history display

7. Indoor temperature / humidity

8. Outdoor temperature / humidity

external sensor

9. SNZ/LIGHT button

a. Turn on/off the backlight

b. Stop the alarm for 5 minutes

10. MODE button

a. Hold for 3 seconds during the normal mode to enter setting mode.

b. Press button during the normal mode to check the alarm time.

11. HIS button

Check the rainfall history record

12. UP button

a. Increase the current setting value.

b. In normal display mode, press this button to check Max./Min. Records.

13. DOWN button

a. Decrease the current setting value.

b. Switch between Celsius and Fahrenheit at any time

14. RAIN button

Check the rainfall records(daily,weekly,monthly,total.)

1 2

9 in 1 Wireless Rain Gauge

Item No.W208703

User Manual

Thank you for purchasing W208703 Wireless Rain Gauge. Please

take a moment to read this guide and store it for future reference.

15. Battery Compartment 3xAA (batteries not included)

16. Wireless signal indicator (Flashes when data is being sent to the

display unit)

17. Compartment 2xAA batteries (batteries not included)

2. Package Contents:

1. Display unit

2. Wireless rain gauge

3. Instructions Manual

3. Getting started

3.1 Inserting the batteries

• Place 3xAA batteries into the display unit.

• Place 2xAA batteries into the wireless rain gauge.

Note:

• The range is 150 ft. (50m) unobstructed. The wireless range may

be reduced by trees, walls, windows, etc.

• Do not place rain gauge in direct sunlight as this will give you an

inaccurate reading.

3.2 Replacing Batteries:

• We recommend using high quality batteries for the best product

performance.

• Heavy duty or rechargeable batteries are not recommended.

• The outdoor sensor requires lithium batteries in low temperature

conditions. Cold temperatures would cause alkaline batteries work

improperly.

• Do not mix old and new batteries. Do not mix alkaline, standard,

and rechargeable batteries.

3.3 Low Battery Indicator:

If the low battery indicator is displayed on the LCD for either the

outdoor sensor or the display unit, immediately change the batteries

to prevent disruptions in communications of the devices.

Default settings

1. Default time: 12:00 (Time form: 12H)

2. Default date: 01/01 (Year: 2019, date form: M/D)

3. Default week: TU (Language: EN, 7 languages can be selected)

5. Default temperature: °F

6. Rainfall unit: IN

6. Default alarm: AM 6:30, default: off, default snooze time: 5min.

4.Operation

Note:

Hold down the UP button or the Down button to select values faster.

Manually Setting the Time, Date & Units:

• Press and hold down the "MODE" button for 2 seconds until the

display begins to flash.

• Set the following information in the order listed:

• 12/24 hour format

• Hours

• Minutes

• Month/Day or Day/Month format

• Year

• Month

• Day

• Day of the week language:German, English, French, Italian,

Spanish, Dutch and Danish

• Rainfall unit

• To select individual values, press UP button or the DOWN button

and confirm each selection by pressing the MODE button.

Note:

You will automatically exit settings mode if no buttons are pressed

for 10 seconds.

5.Alarm Clock:

Setting the alarm

• In standard mode, press “MODE” enters into the alarm mode.

• In alarm mode, hold the “MODE” button for 2 seconds to enter the

alarm setting mode, the setting order is Hour >>> Minute >>> Exit.

Use the “UP” and “DOWN” buttons to set the required hour and

minute.

• Press “MODE” (or no key for 20 seconds) so exit and save the

setting.

• To select individual values, press UP button or the DOWN button

and confirm each selection by pressing the MODE button.

• If you do not make an entry for 20 seconds, setting mode is exited

automatically.

Activating/deactivating the alarm

In alarm mode, press “UP” or “DOWN” to turn the alarm ON or

OFF. The alarm icon will appear to disappear.

Stopping the alarm/snooze function

• When the alarm is triggered, the alarm symbol begins to flash and

an alarm sounds.

• By pressing any button (except the SNOOZE/LIGHT button to stop

the alarm. Otherwise, it will stop automatically after 2 minutes.

Note:

While the alarm signal is sounding, press the SNOOZE/LIGHT

button to activate the snooze function. The alarm will sound after 5

minutes.

6. Temperatue and humidity

6.1 Temperature

• Indoor temperature 0°C ~ 50°C (32°F ~ 122°F), display LL.L when

below 0°C and display HH.H when higher than 50°C.

• Outdoor temperature -40°C ~ 60°C (-40°F ~ 140°F), display LL.L

when below -40°C and display HH.H when higher than 60°C.

• Temperature resolution: 0.1°C

6.2 Humidity

• Indoor humidity range: 10%-99%

• Outdoor humidity range: 10%-99%

• Humidity resolution: 1 %RH

• When alarm ringing, temperature and humidity test will be stopped.

Summary of content (3 pages)

PAGE 1
9 in 1 Wireless Rain Gauge Item No.W208703 User Manual Thank you for purchasing W208703 Wireless Rain Gauge. Please take a moment to read this guide and store it for future reference. 1 2. Package Contents: 1. Display unit 2. Wireless rain gauge 3. Instructions Manual 2 4 15. Battery Compartment 3xAA (batteries not included) 16. Wireless signal indicator (Flashes when data is being sent to the display unit) 17. Compartment 2xAA batteries (batteries not included) 3.
PAGE 2
Note: Accuracy • Temperature accuracy: -40°C ~ -20°C: ± 4°C -20°C ~ 0°C: ± 2°C 0°C ~ +50°C: ±1°C • Humidity accuracy: ±5% from 35% to 75% and ±10% from10% to 35% & 75% to 99%. 6.3 Setting the Temperature Units: To switch the temperature measurement between Celsius and Fahrenheit, press the “DOWN” button which is also the C/F option button. You can switch between Celsius and Fahrenheit at any time (except when setting other setting options.) 6.
PAGE 3
FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.