Indoor Outdoor Thermometer Hygrometer Weather Station Instructional Manual (Save the Instructions for Future Reference) Model: EN8829TX
TABLE OF CONTENTS 1.
1.1 Weather Station Appearance 1.2 Button Functions 2. INITIAL OPERATION 3. BACKLIGHT SETTING 4. TIME AND CALENDAR SETTING 5. DAILY ALARM AND SNOOZE FUNCTION SETTING 5.1 Setting the Daily Alarm 5.2 Switching On/Off the Alarm Signal 6. LUNAR PHASE 7. WEATHER FORECAST AND BAROMETRIC 7.1 Weather Forecast 7.
8.1 ℃ or ℉ Temperature Display 8.2 Current Temperature and Temperature Trend Display 8.3 Current Humidity and Humidity Trend Display 8.4 Indoor Comfort Display 8.5 Maximum/Minimum Temperature and Humidity 8.6 Temperature Alert Settings 8.7 Activating and Deactivating Temperature Alert 8.8 Outdoor Sensor Transmission 9. USB CHARGER 10. LOW BATTERY 11.
1.
A1 Outdoor A2 Sensor Strength A3 Outdoor Channel A4 Outdoor Temperature 5 Temperature Trend A5 Outdoor Humidity A6 Humidity Trend A7 Remote Battery Signal A8 Maximum Value A9 Minimum Value B1 Outdoor Temperature Alerts (HIGH - LOW - OFF) B2 Alert On B3 Indoor Temperature Alerts (HIGH - LOW - OFF) C1 Indoor C2 Indoor Comfort C3 Indoor Temperature C4 Temperature trend C5 Indoor Battery Signal C6 Indoor Humidity C7 Maximum Value C8 Minimum Value
D1 Weather Forecast D 2 Barometric Pressure E1 Calendar and Moon Phase Part B- Weather Station Back E2 Time or Alarm Time
1 USB Charger Output Socket 2 Power Supply Socket Part C - Wireless Outdoor Sensor 3 Station Table Stand 4 Battery Compartment
1 Remote Sensor – Temperature 2 Outdoor Channel 3 Humidity 5 “ °C/°F ” Switch Button 6 “TX” Reset Button 7 3 Channels Select 8 Note: The operating frequencies of the 3 channels are the same, all of which are 433.92MHz. Wall Mount Hole 9 Battery Compartment 1.
Normal Mode Button Function SET Press Time Setting Hold Press Alarm Setting Hold Switch Display Time or Confir of Time or Alarm m and Alarm Setting Go to the Next Step View Clear indoor/outdoo Max/Min r Max/Min Data Data Turn On/Off Temperat Temperature ure Alert Alert Setting 3 Channel Channel Increa Increase Switch Searching se Continua lly Turn On and °C/°F Turn Adjust Switch on the brightness of backlig Backlight in DC ht Mode --- MEM ALERTS UP SNOOZE/LIG HT Press Confirm and Go to the Nex
DOWN Turn On/Off Alarm --- Decre ase Decrease Decrease Continua lly Decrease Decrease Continual ly Decrease Continually 2 INITIAL OPERATION Plug in the original power cord or insert 3 x AAA batteries observing polarity. All icons on the screen of main unit will light up for 3 seconds, you will hear a beep, and the main unit will begin toe detect the indoor temperature and humidity.
At this time, the RF icon “ ” will appear and flash in the “Outdoor” display area of the main unit. F.Y. I The main unit can be connected to 3 outdoor sensors at the same time, please make sure that the channels of the outdoor sensors are different. To get a strong signal, we suggest that: --- A minimum distance of 8 feet to all sources of interference, such as televsions or computer monitors. --- The reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices.
sequence is Bright- Slightly Bright - Dim - Off. 4 TIME AND CALENDAR SETTING Press and hold “SET” button for 3 seconds to enter the time setting operation, press “UP” and “DOWN” buttons to select, press “SET” button once to confirm and go to the next step. The sequence steps are as follows.
Fahrenheit/Celsius Barometric Unit Weather Forecast For example, press and hold “SET” button for 3 seconds, the 12/24 Hour Format display begins to flash, press “UP” and “DOWN” buttons to select the mode you prefer, press “SET” button again to confirm and Hour begins to flash. F.Y.I. During operation, if no operation is performed within 20 seconds, the device will return to normal mode automatically.
5 DAILY ALARM AND SNOOZE FUNCTION SETTING 5.1 Setting the Daily Alarm Short press “SET” button once to switch the display of time or alarm. If select Alarm mode, the related “AL” icon is appeared. Press and hold “SET” button for 3 seconds, the hour display begins to flash, press “UP” and “DOWN” buttons to set the required hour. Press “SET” button to confirm your setting, the Minute display begins to flash, press “UP” and “DOWN” buttons to set the required minute.
Short press “DOWN” button once to turn on/off alarm. When alarm is sounding, the related icon flashes, press “SNOOZE/LIGHT” once, the alarm will be silent and come on again after the setting snooze duration. Press any other buttons except the “SNOOZE/LIGHT” one time to stop the alarm and it will sound on the following day. The related icon won’t disappear. 6 LUNAR PHASES The device displays 8 different moon phases according to the calendar.
7 WEATHER FORECAST AND BAROMETRIC 7.1 Weather Forecast The Station calculates a weather forecast for the next 6 -12 hours based on the barometric pressure trend, NOT the current weather. Of course this forecast can not compare to that of professional weather services supported by satellites and high performace computers, but merely provides an approximate indication of current developments. Please give priority to the weather forecast of the local weather forecast service.
It usually takes about 7 to 10 days for barometric calibration as it will ensure an accurate forecast for your location. When using the device for the first time, please wait a few days to correct the weather forecast. To speed up device response and measurement time, you can also manually calibrate the current weather icon. F.Y.I. The flashing clouds indicate that the system is operating normally, not that the product is malfunctioning.
manually. 8 TEMPERATURE, HUMIDITY AND COMFORT DISPLAY 8.1 ℃ or ℉ Temperature Display Press and hold “SNOOZE/LIGHT” button for 3 seconds to change the temperature unit to °C or °F. Or you can set the temperature unit in advance when setting the time. 8.2 Current Temperature and Temperature Trend Display The temperature continued to rise more than 1℃/1.8℉ within 1 hour. The cumulative value of the temperature rising or falling continuously does not exceed 1℃/1.8℉ within 1 hour.
8.3 Current Humidity and Humidity Trend Display The humidity continued to rise more than 5% within 1 hour. The cumulative value of the humidity rising or falling continuously does not exceed 5% within 1 hour. The humidity continues to drop more than 5% within 1 hour. 8.4 Indoor Comfort Display Comfortable 8.
To view indoor&outdoor maximum&minimum temperature and humidity data in the past 24 hours, press the “MEM” button. Press once to show the maximum data Press twice to show the minimum data Press and hold “MEM” button for 3 seconds to clear and re-record the maximum and minimum temperature and humidity. 8.6 Temperature Alert Settings Before entering the settings, you must select the remote channel, different channels can set different temperature alarm ranges.
(HI)--Indoor LOW Temperature(LO). After selecting, press “UP” to arm ( icon is appeared) the alert if you wish to set it and press “DOWN” to turn off the alert (leave alert OFF to skip and move to next alert). When the alert is armed (ON) press and hold the “ALERTS” button to move to the alert value (The value is flashing). Press “UP” or “DOWN” buttons to adjust the alert values. Press the “ALERTS” button to confirm&move to the next alert. F.Y.I.
8.8 Outdoor Sensor Transmission When the batteries are installed in the remote sensor, the main unit will automatically connect to it. The main unit can connect up to 3 remote sensors at the same time, please make sure that the channels of the remote sensors are different.
9 USB CHARGER When you use USB charger to charge the electronic device, please make sure weather station is powerd by orignal power cord, DO NOT use batteries only. 10. LOW BATTERY If the battery icon“ ” appears, the batteries in the remote sensor and main unit should be replaced as soon as possible. The battery icon “ ” represent of full of electricity. 11. PRODUCT SPECIFICATION Screen size: 5.
Indoor & Outdoor humidity measurable range: 20%RH ~ 95%RH Barometric pressure measurement range: 850hPa/mb(25.1 inHg) to 1100hPa/mb(32.
SAFETY This device is not intended for use by persons (including children under 8 years of age) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction by the person responsible for their safety. The weather station is a battery-operated product. If a battery is swallowed accidentally, seek medical assistance immediately.
FCC STATEMENT Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.