Bluetooth Smart Thermometer Model: EM 2239 App Downloads: *Hardware Requirements: iPhone 4s (or above) or Bluetooth v4.0 enabled smart device *Software Requirements iOS 7 (or above) or Android 4.
INSTRUCTION Thank you for selecting Smart Thermo.Simply program your choice of meat type,target temperature or cooking time either on the touch-key display unit or your smart device via the corresponding app. When your grill is cooked to perfection,You do not need to wait by the grill to monitor the cooking status. Best of all,the app allows you to even textintegrating photos of dishes on social community.
OVERVIEW DISPLAY UNIT-FRONT VIEW d c 1 2 3 4 6 5 a b 1. 2. 3. 4. 5. 6. a. b. c. d. Current temperature; °C/°F(temperature measurement unit) Pairing indicator power on/off.
DISPLAY UNIT-REAR VIEW 1 3 2 1. Battery compartment 2. Magnet 3. Reset button BATTERY INSTALLATION 1. Remove the battery door by twisting it counter-clockwise 2. Replace the battery with a CR2032 coin cell battery. 3. Ensure the battery is in place, matching the polarities (+/-) and replace the battery door. 4. Press RESET after each battery change.
CONNECTING THE PROBE Carefully then plug the meat probe into the bottom socket. Probe Use Meat Probe Acceptable Temperature Range: -13°F to 572°F (-25ºC to 300ºC) The Meat Probe should always be inserted into the center of the item which is being cooked for an accurate temperature. When using a standard Meat Probe, be sure the probe wire will not be exposed to flames or temperatures exceeding 572°F (300°C). NOTE The probe should be cleaned by hand with a dishcloth, standard dishwashing soap and warm water.
POWERING ON & OFF 1. To turn on the SmartThermo, follow these steps: Press the power button located in the bottom of the LCD. The LCD will full screen display while waiting for pairing. 2. To turn off the SmartThermo, follow these steps: Press the power button located in the bottom and hold of the LCD for three seconds. Auto Shut-Off: The SmartThermo will automatically turning off if there is no probe installed.
NOTE If low battery icon “ ” displays on the screen, please replace with new batteries for the corresponding device. CONNECT WITH YOUR SMART DEVICE To quickly find the application from the Apple Store , please type 'SmartThermo' as keyword in the search engine. Ensure your mobile device is compatible with iOS 7 and Android 4.3 devices and later, Only compatible with Bluetooth v4.0 devices . You can remotely set the Smart Thermo and read the thermometer information through Bluetooth v4.
IOS SERIES MODEL iPhone ® (4S and later) ® iPad (3rd generation and later) TM iPad mini (all generations) iPod touch ® (5thgeneration and later) PAIRING YOUR Smart Thermo First of all, you need to pair your Smart Thermo with your smart. “ ” will flash on the screen of the Smart Thermo while pairing and be on after successful pairing.
HOME DISPLAY UNIT-WORK 1 2 3 4 5 6 7 8 1. Profile (Tap to display toggle between Profile, Temperature or Timer display) 2. Meat and doneness display (Tap to change setting) 3. Set temperature 4. Target temperature icon 5. Temperature trend display 6. Current meat temperature (Tap to display temperature history) 7. Cooking time or count down timer 8.
To select the measurement unit: 1. Tap to view the measurement unit options. 2. Tap on your desired unit. 3. Tap to go back to the previous screen to save. Settings the choose food You can set your Smart Thermo through the application, such as measurement units. The settings are as follows.
To select food: 1. Tap to view the Profile options of food . 2. Tap on your food type. 3. Tap to select cooking degree and temperature can be adjusted up and down 2 degrees 4. Tap to go back to the previous screen to save.
Settings the definition temperature You can freely set alarm temperature by remote device To select the temperature: 1. Tap to view the Profile options of temperature 2. Slide down and up to set temperature you need. Temperature measurement range: -25°C to 300ºC (-13°F to 572°F) 3. Tap to go back to the previous screen to save. Timer setting You can freely set alarm time of your smart Thermo by remote device. To select the timer: 1. Tap to view the Profile options of timer . 2.
Alarm seting To select the alarm ring : You can choose any alarm ring from 27 rings . 1. Tap to view the Profile options of rings 2. Tap to choose your favorite ring 3. Tap to go back to the previous screen to save. 4. If food is cooked , alarm ring will ring and show notification menu. Temperature will show on Smart Thermo screen and LED backlight will flash 5 times.
VIEW HISTORY READINGS Tap on temperature in central. You can view history date which is presented in graphs. SHARING You can put the food cooking photos in community and share with others. To select the camera: 1. Tap to view the Profile options of camera 2. Tap on camera button . 3. Tap on share button and food cooking photos you took will be shared in your community.
SPECIFICATION TYPE DESCRIPTION DISPLAY UNIT LxWxH Temperature measuring range 51x51x20.5mm -25°C to 300ºC (-13°F to 572°F) Temperature unit °C/°F Power 1xCR2032 3V batteries PROBE WRAP LxWxH 77x65x13.
The statements should be displayed in the user manual: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.