User's Manual

ESL User Manual

1. ESL Function Description:

ESL positive schematic:

Screen of ESL Rear

cover of the

battery

ESL back schematic:

Battery compartments The

battery（CR2450*2）

Battery replace:

Put the ESL on the desk with its back up→hold the Rear cover of the battery and then pull it out(in the opposite

direction of the gap of the rear cover )→take out the battery→put two new CR2450 batteries (side with words upward)

in the Battery compartments→cover the rear cover; As shown in figure 1.1:

The rear cover’s

gap of battery

①hold down the Rear cover

of the battery and then pull it

②cover the rear cover

②put the batteries in

①take out the batteries

PAGE 1
ESL User Manual 1. ESL Function Description: ESL positive schematic: Screen of ESL Rear cover of the battery ESL back schematic: Battery compartments 2. The battery（CR2450*2） Battery replace: Put the ESL on the desk with its back up→hold the Rear cover of the battery and then pull it out(in the opposite direction of the gap of the rear cover )→take out the battery→put two new CR2450 batteries (side with words upward) in the Battery compartments→cover the rear cover; As shown in figure 1.
PAGE 2
②put two new CR2450 batteries(side with words upward)in the battery compartments. ① is the step of taking out the battery ② is the step of putting the batteries in; FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.