CMC191 Use Manual
1 ESL System platform ESL system platform include CMC191 ESL reader, ESL tag, system data center. System data center sends command to read/write tag by Ethernet, when CMC191 receives the command it will scans the tag and update the tag image information, and return the result to system data center.
2 CMC191 setup diagrammatic drawing: 2.1 CMC191 identification rage radius 25 meter； 2.1 Rod-like antennas radiation range is oblong（left to right radiation rage is larger than front to back） ； 2.3 CMC191 will find its different channel from the others when it powers on. Different color means different channel； The same channel CMC191s do not be allowed; 3 CMC191 Appearance Specification： ： 1 1 4 1 2 3 1 Label Specification： ： 1. Confirm Screw Holes 2. Work LED 3. Power LED 4.
Label specification： ： 1. DC Input 2. Switch 3. Ethernet Input 4. Antenna Port 1 2 4 3 Label specification： ： 1. I/O Port 2.
6 Installation instructions And Note 1. Suggest installation CMC191 on the roof ceiling, to make its radiation range well. 2. Please according to this specification choice positioning screw and a positioning hole. 3. Ensure that the background system to the CMC191 screen line length does not exceed 100m, Suggested the use of twisted pair shielded cable, otherwise it will affect the CMC191 signal strength and distance recognition. 4.
FCC Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
