Quick Start Guide

SMARTHUB
Quick Start Guide
Getting Started
Your SMARTHUB base unit is the
command centre for the following
Fusion Sport products:
• SMARTSPEED PRO
• SMARTSPEED LITE
• SMARTJUMP
• SMARTCAPTURE NEXT
• SMARTSTART
Product Support
Visit our website for support videos and
more or email [e-mail]
Overview
Front View
Overview
Bottom View
Overview
Rear View
Battery Replacement
Attention!
Replacement batteries must be
purchased from Fusion Sport or an
authorised distributor. Use of 3
rd
party
batteries will void warranty.
1. Remove battery cover screws and door
2. Remove existing battery
3. Clip new battery into the connector
4. Replace Battery door
5. Reset the unit: press and hold the power
button until the Power Indicator LED
illuminates
Charging
The remaining battery charge on your
SMARTHUB is displayed on the LCD
screen.
Turn your SMARTHUB off after each
session by holding the power button
on the underside of the unit.
If your unit is inactive for 30 minutes
without being turned off, the unit will
sound an alarm to remind you. This
alarm will sound for 15 seconds, after
which the unit will automatically
power off.
Charge the unit using the Micro USB
charger provided.
Antenna Operation
Extending the antenna is recommended for
all sessions, except for when connecting
SMARTJUMP directly.
Attention: Do not force the antenna.
Please follow the instructions carefully.
SD Card
Important – Please do not remove the SD
card unless instructed to by Fusion Sport
support.
PS2 Ports
Two PS2 ports are located on the
underside of the unit. In the first release
version, only the left port (Port A) is used
for connecting Hand start pads (see
picture above). Port B is unused at this
time.
LED Display
LCD Display
Flash
Button
Scroll
Button
Enter
Button
Charge
indicator
LED
Power
indicator
LED
Battery
Door
Antenna
Tripod Mount
PS2 Port B
(SMARTSCAN)
PS2 Port A
(SMARTJUMP)
Micro USB
Port
Power/
Reset
Button
Bluetooth
Pairing
Button
Setting Up: Rotate the antenna in a CLOCKWISE
DIRECTION ONLY
Putting Away: Rotate the antenna in a
COUNTER-CLOCKWISE DIRECTION ONLY
SD Card
Battery
terminal