RDM TA SEL CLOCK RPT PTY APS SCAN INT BAND AF TOP MODE CALL LOG Entertainment System
Locations and Names of the Controls 1 20 2 19 3 4 18 1 5 2 3 RDM5 RPT4 6 6 AUX USB RESET VOLUME 7 8 9 10 11 12 13 1. NFC DETECTION AREA 2. IR REMOTE CONTROL SENSOR 3. 1/2/3 BUTTON 1 TEL /REDIAL BUTTON 2 HANG UP BUTTON 4.ZONE 1/2 BUTTON 5. / BUTTON 6.PLAY/PAUSE BUTTON RADIO REGION SELECT BUTTON 7.POWER BUTTON 8.STOP BUTTON AS/PS BUTTON 14 15 16 17 9.AUX IN SOCKET 10.HEADPHONE SOCKET 11. USB SOCKET 12.BT MODE BUTTON/EQ BUTTON 13.MICROPHONE IN 14.RESET BUTTON 15.
The remote control description 21 20 19 1 2 3 4 5 6 APS 18 SEL SCAN CLOCK MODE BAND PTY TA TOP INT RPT RDM AF 17 16 15 14 7 13 8 9 10 CALL LOG 12 11 1.Power button 2.APS button 3.SCAN button 4.CLOCK button 5.BAND button 6.MODE button 7.NUMBER buttons(0~9) 1/PAUSE/PLAY button 2/ INT button 3/RPT button 4/RDM button 8. button 9. MUTE button 10. T-M button 11.TEL button 12. HANG UP/CLEAR button 13. button 14.TA button 15.PTY button 16.- button 17.AF button 18.UP button 19.SEL button 20.
5. To mute or resume sound Press MUTE button on the remote control to eliminate or resume sound immediately during playback. 6. To select and adjust the mode of the sound and menu Press SEL button repeatedly to select the mode of AF ON/AF OFF mode ,TA ON/TA OFF PTY NEWS/PTY MUSICS,NEWS/POP M,BASS,TRE(treble), LIR(balance), LOUD OFF/LOUD ON, VOL LAST/VOL DEFA, BEEP ON/BEEP OFF,DX/LOCAL (in RADIO mode),STEREO/MONO(in RADIO mode),SUBW ON /SUBW OFF,CLK XX XX, in the sequence and circulation.
Radio Operation 1. FREQUENCY SELECT In RADIO mode. Press and hold PLAY/PAUSE button for about 5 seconds to select your desired frequency EUROPE,USA1,USA2 or AUSTRALIA. 2. AM/FM BUTTON In RADIO mode, press and hold INPUT MODE button on the front panel or briefly press BND button on the remote control to select your desired radio band of FM1, FM2, FM3, AM1, AM2 , and the selected band will be displayed on the LCD of the front panel. 3.
7. LOC BUTTON 1) In RADIO mode, when the signal of the distance radio station are very weak and the receiving effect is bad during tuning, press LOC button on the remote control to turn off the LOC function, then tune again for the distance radio station; 2) In RADIO mode, when the signals from the local radio stations are too strong, this could lead to interference. press LOC button on the remote control to turn on the LOC function, Re-tune for the local station required. 8.
USB Operation 1. Pause Playback During playback, press PLAY/PAUSE button on the front panel or remote control to pause the playback, press PLAY/PAUSE button again to resume normal playback. 2. Stop Playback During playback, press STOP button once to pause the playback, then press the PLAY/PAUSE button to resume the normal playback; press STOP button twice to stop the playback, then press PLAY/PAUSE button to start playback from the beginning of the first chapter/track. 3.
Bluetooth Handsfree System 2)Select the item of Finding the Bluetooth Device and enter it. After finishing the finding,it will show the name of the Bluetooth Device FURRION DV3010-XXXX (where X can be any character A-Z or number 0-9 ) .Select it and enter it, then it will show an interface that ask you to input a password, input the password 0000 and enter it. Then it will tell you pair OK.
5.1 Incoming call ringing, short press TEL button on the remote control or 1 button on the front panel to accept the call. 5.2 To reject Incoming call ringing, short press HANG UP button on the remote control or 2 button on the front panel to REJECT the call. 5.3 During a phone call, short press HANG UP button on the remote control or 2 button on the front panel to end the call. Note: When an incoming call is present the LCD of the DV3010 will display CALL IN. 6.
Installing the unit * Before finally installing the unit, connect the wiring temporarily and make sure the unit and the system work properly. *Fix the unit with screw according to following diagram. SCREW PLASTIC SHELL OF THE FRONT PANEL SCREW 1. Remove plastic shell of the front panel from the unit. 2. Fix the unit with 4 pieces #8 pan head self tapping screw. 3. Put back plastic shell of the front panel to the unit.
Wiring Diagram AV OUT AV IN SUBWOOFER OUT IR REMOTE JACK ANTENNA AUDIO IN Wiring connecting socket view PIN NO COLOR FUNCTION 1 GREY FRONT RIGHT SPEAKER (+) 2 GREY/BLACK FRONT RIGHT SPEAKER (-) 3 WHITE FRONT LEFT SPEAKER (+) 4 WHITE/BLACK FRONT LEFT SPEAKER (-) 5 GREE/BLACK REAR LEFT SPEAKER (-) 6 GREE REAR LEFT SPEAKER (+) 7 PURPLE/BLACK REAR RIGHT SPEAKER (-) 8 PURPLE REAR RIGHT SPEAKER (+) 9 BLUE AUTO ANTENNA 10 NONE 11 RED MEMORY B+ 12 BLACK GROUND PAGE 10 WIR
Specification GENERAL Supply Voltage Current Consumption Power Output Number of channels Unit Dimensions FM SECTION Frequency range Effective sensitivity I.F Frequency AM SECTION Frequency range Effective sensitivity I.F Frequency Preamp Output USB PLAYBACK System Frequency characteristics Signal to noise (USB) DC 12V Max.10A 4x 25W RMS 2 STEREO channels. (L X W X H): 200x110.5x105(mm) 87.5Mhz - 108Mhz (Europe) 87.5 Mhz - 107.9Mhz(U.S.A.) 87.5 Mhz - 108Mhz(Australia) 3uV. 10.7MHz.