ASSEMBLY INSTRUCTIONS VERSION # 21-08-02 1/8 TOOLS REQUIRED Alien Wrench (Included) 2 People Recommended 00 EASY ae DIFFICULT The Assembly Hating Is a B-point system showing the level of effort beaded to assemble a specific product.
CHECK BEFORE STARTING Are you missing anything? Double-check all parts, hardware and accessories listed are all accounted for. Should we send any replacements? Ara there any irregularities or flaws in the pairs? We can send replacements! Check out our Quick Tips! We recommend reviewing the per-assembly handouts. Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and all diagrams prior to assembling.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-assembler furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful {ips that may speed up the process. Teamwork ALWAYS have at leas! two people to help with transporting and assembling the product 1 avoid potential injury and/or damage. Suitable Location Assembling near the area of the intended location is highly recommended.
ASSEMBLY AND CARE ADVICE A FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. \ Turn clockwise to tighten and only tighten when step is completed ar when instructed to do 50. Position each part correctly and insert screws or bolts into their respective holes. Use the appropriate hand tools or power tools for assembly. Select steps, such ag tightening serpents and/or bolts, may require hand tools to avoid causing damage during assembly.
TABLE SET + Please keep instructions for future reference. + Chick the quantity and irregularity of parts and hardware before you start.
1 ASSEMBLY INSTRUCTIONS Part @) x pc Part (2 x 1pc Hardware #8) x Bros Hardware x PCs Hardware (2) x 1pc Align chair seat (#2) to chair back then secure by using bolts (#A) with washers X 2 8/8
ASSEMBLY INSTRUCTIONS Part @ x PCs Part @ x 1pc Hardware #0 x PCs Hardware #0 x apes Hardware (5) x 1pc Part @) x 1pc Hardware (#8) x PCs Hardware (0) x PCs Hardware Align legs (#4) to the top then secure by using bolts (#8) with washers Align legs (#5) to support then secure by using bolts (#C) with washers 7/8