ASSEMBLY INSTRUCTIONS VERSION # 21-07-07 TOOLS REQUIRED Philips Screwdriver {hint Inc her cn A 2 People Recommended 000-0 EASY ier.
CHECK BEFORE STARTING Are you missing anything? Double-check alt parts, hardware and accessories listed are all accounted for. Should we send any replacements? Are there any irregularities or flaws in the parts? We can send replacements! Check out our Quick Tips! We recommend reviewing the per-assembly handouts. Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and all diagrams prior fo assembling.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid contusion, we have provided some helpful tips that may speed up the process. Teamwork ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage.
ASSEMBLY AND CARE ADVICE A FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. Position each part correctly and insert screws or bolts into their respective holes. Turn clockwise to tighten and only tighten when step is completed or when instructed the appropriate hand tools or power tools for assembly. Select steps, such as tightening screws and/or bolts, may require hand tools to avoid causing damage during assembly.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS @ Note : XS D Every cam lock bolt must have a cam Kg ® lock connector in order to fasten the parts together. cam bolt cam lock screwdriver | c= \ Screw the cam Insert the cam bolt into the bolt into panel bolt hole of joint panel. lz 1! © Align the cam lock with its side opening Turn the cam lock clockwise gently {or arrow} pointing to cam bolt. until it will not turn any more.
ASSEMBLY INSTRUCTIONS 1 Hardware x 8 pecs Hardware (3) x 4 pes Hardware (8) x 1 set Hardware (8) x 1 set “7g Apply dale 6 glo Niter dowel holes af pails before 8/18
ASSEMBLY INSTRUCTIONS 4 Pat) x 1 pe Part {3x 1 pc Hardware 2)x 2 pcs 2% Professorial lo Paged for draining inclinations a wavelengths nanny (2) 45 BARE RT).
ASSEMBLY INSTRUCTIONS 11 Part Gx 4 pes Hardware {0x 16 pes Accessory(Ad)x 10 pcs Nita shell pies (#10) fa the holes of the sired alcohol height | SINE stickers (had) io Bose aah foils. Top Front 12 Part @x 1 pc Hardware x 1 set Hardware x 2 sets Accessory) x 2 pcs “Dag Adjustment Length Adjustment.
ASSEMBLY INSTRUCTIONS Wall Mounting and Fixing EXPANSION WALL ANCHOR Our provided expansion wall anchors are only suitable for masonry walls, such as drywall, plaster or concrete, and are best for holding lightweight items or for anti-lip prevention, If you ara unsure of the correct wall anchor to use with the product, please request professional guidance. liability for product damage or failure due io using the incorrect anchors will fall on the installer. QUICK TIPS 1.