E-commerce Division - Enitial Lab FGI-1874C25 (Not Included) Page 1 of 18 18-03-23
Page 2 of 18
Page 3 of 18
Page 4 of 18
Page 5 of 18
BUFFET MODEL #FGI-1874C25 B 1PC C 1PC D 1PC E 1PC F 1PC " .18 16 A 1PC 47 .24 A " S S T C 35.43" R B M G 1PC H 1PC J 8PCS D K 2PCS N 1PC M 2PCS O 1PC Q 1PC 2 22PCS 0.47" 7 1PC L 2PCS L DIMENSIONS: 1 22PCS I 1PC 8 2PCS 3 74PCS 4 12PCS 0.98" 9 4PCS R 1PC P 1PC S 2PCS 5 6PCS 6 40PCS 0.59" 1.5" 8PCS T 1PC 8 Sets 8PCS 3PCS 0.59" 3571-95*4 83715*4 1PC 1PC 1PC 1PC 1.26" 2PCS 0.
Get Ready Please group boards as below E 1PC J 3PCS J 5PCS F 1PC K 2PCS O 1PC H 1PC P 1PC I 1PC N 1PC B 1PC A 1PC L 2PCS D 1PC G 1PC M 2PCS Body Q 1PC S 2PCS T 1PC R 1PC Doors /Shelf Page 7 of 18
STEP : 1 1 Hardware 1 x 18PCS 1 Hardware 3 x 24PCS 1 1 3 A 1 1 3 1 1 B 3 3 1 3 3 1 C 1 1 3 1 D 3 1 Dowel hole Use a dab of glue into dowel holes before inserting dowels (#3).
STEP : 2 3 3 Hardware 1 x 4PCS 3 3 Hardware 3 x 50PCS J I 3 1 3 3 x8 3 K 3 M 3 1 x2 3 3 L 3 x2 Dowel hole x2 3 3 STEP : 3 Hardware 5 x 6PCS Hardware 6 x 12PCS 8 Hardware 8 x 2PCS Hardware x 4PCS R 8 Align hinges (#5) to the holes of panels (#S,T), then secure by using screws (#6).
STEP : 4 F Finish J Finished Side Here J J J Dowel hole J E Refer to page 5 on how to secure cam locks (#2) to cam bolts (#1). STEP : 5 Hardware 2 x 2PCS x 2PCS Hardware Finished Side Here Finish 2 E I 2 Use stickers (#12) to cover cam locks (#2).
STEP : 6 Hardware 2 x 4PCS Dowel hole 2 B 2 2 F E G 2 STEP : 7 Hardware 4 x 2PCS Finished Side Here 4 4 G J Page 11 of 18 J J K
STEP : 8 Hardware 4 x 2PCS Finished Side Here K J J J H Dowel hole STEP : 9 Slide back panels (#N) through the thin lined grooves of the unit.
STEP : 10 Hardware 2 x 6PCS Hardware x 6PCS 2 A 2 B 2 2 I 2 G H C 2 Dowel hole Grooves on panel (#C).
STEP : 12 Hardware 4 x 8PCS B 4 I 4 G 4 D H C 4 4 4 4 4 STEP : 13 Dowel hole Grooves on panel (#D).
STEP : 14 Hardware 2 x 6PCS L 2 2 M 2 2 M D 2 L 2 Dowel hole STEP : 15 Hardware 9 x 4PCS Q 9 9 Place shelf pins to the desired height of shelf (#Q).
Align hinges on door panels (#S,T) to the unit, then Hardware 6 x 24PCS secure by using screws (#6). STEP : 16 6 6 6 6 S T S Adjust length of doors. Adjust depth of doors. STEP : 17 Hardware 10 x 4PCS 10 10 10 10 F R 10 Align hinges on door (#R) to unit, then secure by using screws (#10).
STEP : 18 7 Hardware 6 x 4PCS Hardware 7 x 1PC 6 6 6 B 6 R Align long hinge (#7) to the holes of the unit and door (#R), then secure by using screws (#6). STEP : 19 Hardware x 8 Sets Insert fixative plates (#11) all around the grooves of the back panels, then secure by using screws (#11).
STEP : 20 Hardware Hardware Hardware Hardware Hardware Hardware x 1PC x 1PC x 1PC x 1PC x 2PCS x 1PC Wall Wall STEP : 21 Page 18 of 18
