Submittal Sheet

ManualsBrandsFurnas Controls ManualsPower SuppliesSITOP PSU100S Stabilized Power Supply (Input 120/230 VAC, Output: 24VDC/5A)

Data sheet 6EP1333-2BA20

SITOP PSU100S 24 V/5 A

SITOP PSU100S 24 V/5 A Stabilized power supply input: 120/230 V

AC, output: 24 V DC/5 A

Input

Input 1-phase AC

Supply voltage

● 1 at AC Rated value

120V

● 2 at AC Rated value

230V

● Note

Automatic range selection

Input voltage

● 1 at AC

85...132V

● 2 at AC

170...264V

Wide-range input No

Overvoltage resistance 2.3 × Vin rated, 1.3 ms

Mains buffering at Iout rated, min. 20ms; at Vin = 93/187 V

Rated line frequency 1 50Hz

Rated line frequency 2 60Hz

Rated line range 47...63Hz

Input current

● at rated input voltage 120 V

2.34A

● at rated input voltage 230 V

1.36A

Switch-on current limiting (+25 °C), max. 40A

6EP1333-2BA20 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6EP1333-2BA20 SITOP PSU100S 24 V/5 A SITOP PSU100S 24 V/5 A Stabilized power supply input: 120/230 V AC, output: 24 V DC/5 A Input Input 1-phase AC Supply voltage ● 1 at AC Rated value 120 V ● 2 at AC Rated value 230 V ● Note Automatic range selection Input voltage ● 1 at AC 85 ... 132 V ● 2 at AC 170 ... 264 V Wide-range input No Overvoltage resistance 2.3 × Vin rated, 1.3 ms Mains buffering at Iout rated, min.
PAGE 2
I²t, max. 1 A²·s Built-in incoming fuse T 3,15 A/250 V (not accessible) Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 6 A characteristic C Output Output Controlled, isolated DC voltage Rated voltage Vout DC 24 V Total tolerance, static ± 3% Static mains compensation, approx. 0.1 % Static load balancing, approx. 1% Residual ripple peak-peak, max. 150 mV Residual ripple peak-peak, typ. 30 mV Spikes peak-peak, max.
PAGE 3
Load step setting time 10 to 90%, typ. 1 ms Load step setting time 90 to 10%, typ. 1 ms Protection and monitoring Output overvoltage protection protection against overvoltage in case of internal fault Vout < 33 V Current limitation 6 ... 7.1 A Property of the output Short-circuit proof Yes Short-circuit protection Constant current characteristic Enduring short circuit current RMS value ● typical 7.
PAGE 4
Connection technology screw-type terminals Connections ● Supply input L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm² singlecore/finely stranded ● Output +, -: 2 screw terminals each for 0.5 ... 2.5 mm² ● Auxiliary Alarm signals: 2 screw terminals for 0.5 ... 2.5 mm² Connections signaling contact 2 screw terminals for 0.5 ... 2.