Contents/Contenu/Contenido English.......................2 Français.....................12 Español......................23 Introduction Thank you for purchasing the Furman AC-215 / AC-210 E Power Conditioner. For over 32 years, Furman has pioneered the development and manufacturing of AC power products for the most demanding audio, video, and broadcast professionals.
• Compact chassis design easily attaches to any flat screen television mount with included hardware Safety Information To obtain best results from your Furman AC-215 / AC-210 E Power Conditioner, please be sure to read this manual carefully before using. Warning To reduce the risk of electrical shock, do not expose this equipment to rain or moisture. Dangerous high voltages are present inside the enclosure. Do not remove the covers. There are no user serviceable parts inside.
6. Clean your unit with a damp cloth only. Do not use solvents or abrasive cleaners. Never pour liquid on or into the unit. 7. Your unit should be serviced by qualified service personnel when: • The power supply cord or the plug has been frayed, kinked, or cut. • Objects have fallen or liquid has spilled into the unit. • The unit has been exposed to rain or other moisture. • The unit does not appear to operate normally or exhibits a marked change in performance.
Another feature unique to Furman’s SMP+ circuit is automatic Extreme Voltage Shutdown (EVS) with a TVZ MOV. Extreme voltages are statistically the most common, damaging AC event. The Extreme Voltage Shutdown circuit automatically turns off the AC-215 / AC-210 E when it is fed 137 volts [275VAC for the AC-210 E] or higher, protecting itself and connected equipment from the extreme voltage. Only Furman offers this advanced degree of protection.
authorized Furman Service center for repair. Troubleshooting Symptom: No power to the AC outlets. Possible Cause: Circuit breaker has tripped due to excessive load. Action Needed: Unplug one piece of equipment from the AC-215 / AC-210 E, and push the re-set tab into the circuit breaker bezel. Symptom: No power to the AC outlets, even after the circuit breaker has been re-set. Possible Cause: Protection devices are damaged. Action Needed: Contact the Furman Service Department at 707-763-1010.
Refer to the illustrations below for instructions. The brackets can be positioned facing in or out as shown to best allow for different types of installations. Warranty Furman Sound, LLC. warrants to the original purchaser of this product, the Furman AC-215 or AC-210E, that the product will be free from defects in material and workmanship for a period of three years from the date of purchase.
authorize the purchaser to return the product to the Furman factory or to an authorized Furman repair location. Warranty claims should be accompanied by a copy of the original purchase invoice showing the purchase date; this is not necessary if the Warranty Registration was completed either by mailing in the completed warranty card or by registering on-line at the Furman website. Shipping charges to the Furman factory or to an authorized repair location must be prepaid by the purchaser of the product.
improperly installed, altered in any way or tampered with, Furman determines that the damage did not result from the Occurrence or that no Occurrence in fact took place or Furman determines that the connected equipment was not used under normal operating conditions or in accordance with Manufacturer’s instructions for the connected equipment.
THIS WARRANTY IS EXCLUSIVE. The sole and exclusive obligation of Furman shall be to repair or replace the defective product in the manner and for the period provided above. Furman shall not have any other obligation with respect to this product or any part thereof, whether based on contract, tort, strict liability, or otherwise. Under no circumstances, whether based on this Limited Warranty or otherwise, shall Furman be liable for incidental, special, or consequential damages.
Specifications AC Current Capacity Input: 15 Amp capacity required (10 Amp for the AC-210 E) Output: 15 Amp RMS (both outlets combined) (10 Amp for the AC-210 E) AC Noise Attenuation, Transverse (Differential) Mode >40dB from 10kHz to 100kHz >80dB from 100kHz to 1GHz (linear attenuation curve from 0.
favor al Departamento de Servicio de Furman al (707) 763-1010 ext. 2370 o 2377, de las 8:00am a las 5:00pm hora del Pacífico. Cuando un equipo regresa para reparación, por favor use el empaquetado original del producto. Además, incluya una nota con su nombre, dirección, teléfono, e-mail y descripción del problema. Por favor muestre su número de R/A en el frente de todos los paquetes.
OWNER'S MANUAL AC-215 A COMPACT POWER CONDITIONER AC-215A GUIDE DE L'UTILISATEUR AC-215A MANUAL DEL PROPIETARIO
.............. . . . . . . 11' t • c •• " " ... ,. ,. .................. ~ ~ AC-215A OWNER'S MANUAL ENGLISH Page 4 AC-215A GUIDE DE L'UTILISATEUR FRAN~AIS Page 14 AC-215A MANUAL DEL PROPIETARIO ESPANOL Page 24 All CONTENT ©2009 FURMAN. ALL RIGHTS RESERVED. PRINTED IN CHINA.
• SMP (Series Multi-St age Protectio n) with EVS (Extreme Voltage Shutdow n) (Linear Filtering Technolo gy) with zero ground contamin ation Compac t chassis design easily attaches to any flat screen televisio n mount (Includes hardwar e) • LiFT • Thank you for purchasi ng a Furman AC-215 A compact power condition er, and congratu lations on your choice.
Unfortunately, traditional AC power conditioners have been designed for unrealistic laboratory conditions. Prior technologies, whether multiple-pole or conventional series-mode filters, could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs.
of the cords and cables at the plugs, and the point where they exit your unit. To prevent risk of fire or injury, damaged cords and cables should be replaced immediately. 6. Clean your unit with a damp cloth only. Do not use solvents or abrasive cleaners. Never pour liquid on or into the unit. 7. Your unit should be serviced by qualified service personnel when: • The power supply cord or the plug has been frayed, kinked, or cut. • Objects have fallen or liquid has spilled into the unit.
some level of protection from voltage surges will remain, but the Furman's clamping voltage rating will be compromised. The unit must be returned to Furman Sound, or an authorized Furman Service center for repair. TROUBLESHOOTING Symptom: No power to the AC outlets. Possible Cause: Circuit breaker has tripped due to excessive load Action Needed: Unplug one piece of equipment from the AC-215A and push the re-set tab into the circuit breaker bezel.
types of installations. SERVICE If you require technical support or equipment service, please contact the Furman Service Departme nt at 707-763-1 01 0. You may also email info@ furmansou nd.com. All equipment being returned for repair must have a Return Authorizat ion (RA) number. To get an RA number, please call the Furman Customer Service Departmen t. Before returning any equipmen t for repair, please be sure that it is adequatel y packed and cushioned against damage in shipment, and that it is insured.
MUST be accompanied by a copy of the original purchase invoice or receipt showing the purchase date. Shipping charges to Furman headquarters must be prepaid by the purchaser of the product. Furman shall, at its own expense, furnish a replacement product or, at Furman's option, repair the defective product. Return shipping charges back to purchaser will be paid by Furman.
cords. Any such installation voids this warranty. The Furman warranty only protects against damage to properly connected equipment where Furman has determined, at its sole discretion, that the damage resulted from an Occurrence and does not protect against acts of God {other than lightning) such as flood, earthquake, war, terrorism, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low-voltage disturbances {i.e.
AC Current Capacity Input: 10 Amp capacity required Output: 10 Amp RMS (both outlets combined) AC Noise AHenuation, Transverse (Differential) Mode >40dB@ 1OOkHz >50dB@ 500kHz (linear attenuation curve from 0.05 to 1000 line impedance) Transient Voltage Surge Suppression 120VAC Series Multi-Stage Protection Non-Sacrificia l with Zero Ground Contamination 188V peak clamping @ 6000V /3000A input Extreme Voltage Shutdown 1 37 VAC typically Dimensions & Weight 1.75" (H) x 5" (W) x 8.5" (D), 3 lbs.
1690 Corporate Circle· Petaluma, California, USA 94954 Phone: 877-486-4738 ·Fax: 707-763-1310 www.FurmanSound.