FURIOUSFPV TRUE-D X USER MANUAL Please contact us if you need further assistance: Tech support: tech@furiousfpv.com Sales support: sales@furiousfpv.com Website: http://furiousfpv.
Contents Specifications................................................................................................................................................ 3 Product Layout ............................................................................................................................................. 4 Usage ............................................................................................................................................................ 5 Logo Screen ...
Specifications Antenna Connection: SMA Female connector Working Frequency: BT:2402-2480MHz, RX:5GHz Input Power: 5V-500mA Number of Channels: 48 Channels CE/FCC certified Compatibility: Goggles type Fatshark HDO FatShark Dominator V1, V2 & V3 FatShark HD V1, V2 & V3 How to use Plug & play Modify according to the tutorial clip link below: https://youtu.
Product Layout Trackball is utilized for menu navigation. Exit Menu and Quick Search buttons are utilized for quick access to button lock & unlock, smart search and channel modes. SMA female is compatible with many popular antennas.
Usage The Furious FPV True-D X Menu Flowchart: 5
MAIN MENU Saved Channels All Channels Smart Search Band Scanner Settings Osd Layout Lap Timer Bluetooth Find Mode *Note: While in the different menus if no button is pressed within 15s, True-D X will automatically exit to "Active Channel" display. In the Main Menu, Press Quick Search/Exit Menu button to exit to Active Channel.
Logo Screen When powering on the goggles, the OLED screen will display the FuriousFPV Logo or Custom Logo and the firmware version. If the OLED screen displays a low power warning. Please modify your goggles according to the Specifications section.
Saved Channels Show all saved band and channel numbers There are two profiles available and maximum of 8 channels for each profile Press Trackball for 2s, a pop-up will show: Change: Change the selected channel to another one Delete: delete selected channel Profile: change to the other profile by pressing the Trackball Exit: exit pop-up *Note: While in this menu, you can hold the Quick Search button to switch back and forth between the two profiles.
*Note: Hold the Quick Search button when in the Active Channel display to quickly access smart search. Band Scanner Scans the 5.8GHz band and displays the RSSI of each frequency in a graph. You can use this mode to check the transmission of video transmitters or to find a channel with the lowest noise floor. *Note: Press Exit Menu button to exit to the Main Menu.
Auto Lock BTN: Auto locks the buttons after 5s and doesn’t allow channel changes by just moving the trackball. You can unlock by holding down the trackball or the Exit Menu button. The options are as follows: ON/OFF. Trackball mode: This determines the scrolling behavior of the trackball. It can be set to match the icon movement on the OLED or in the OSD.
Save & Exit: Press Trackball button to save changes and exit Settings. OSD Layout Individual OSD elements can be turned on and off from this menu. You can also change the position of these icons in the OSD. There are five OSD elements available: ANT & Graph, Lap Clock, Lap Result, Warnings, Bluetooth. To adjust the position of the icons in the OSD, on the element that you want to change the position of: press the Trackball and use the Trackball to adjust the icon to your desired position.
Fixed Time: Set time limit (Max: 29 Laps) Practice: For training purpose (Max: 29 Laps) Lap Timer Display Race Time Lap Counter Last Lap Best Lap Start Time From: Start Tone: Race time starts on the tone First to Gate: Race time starts when passing the gate Start Time Delay: Delay time to race start after pressing Start (From 4s to 120s) Number of Laps: Number of laps to race (From 1 to 30 Laps) Antenna Laps: Select desired antenna for RSSI comparison (used to calculate a pass) Sensi
Low Signal Warning: fixed warning level is 30%. If your signal is lower, you cannot use the Personal Lap Timer feature Channel: Set the channel for the lap timer to operate on Threshold Warning Low Signal Last Result: review your last results. To go back to the Lap Timer menu, press the Exit Menu button. *Note in the Lap Timer menu: Press Exit Menu button: Exit to Main Menu. Press the Trackball twice: Start the Personal Lap Timer.
Find Mode In case you lose your drone while flying. The Graphical interface will guide you to the drone with a buzzer warning in the direction that it detects the strongest signal along with a RSSI graph. However, this can only work if your drone is still transmitting (battery still plugged in). Press Exit Menu button to exit this mode. Support The dealer you purchased your product from handles the first line of support.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.