Submittal Sheet

Functional Devices, Inc. • p: 800.888.5538 • f: 765.883.7505 • www.functionaldevices.com • [e-mail]
080814
Transformer:
Over Current Protection:
Frequency:
24 Vac ON/OFF:
Main Breaker ON/OFF:
Approvals:
Dimensions:
Weight:
One 40 VA Split-Bobbin
Circuit Breaker
50/60 Hz
On / O Switch & Breaker
Switch / Breaker (10 Amp)
(Kills power to entire unit: Outlets,
Aux. Output, & Transformer)*
Total Combined Output 9A
Class 2 (UL Approved UL5085-3),
UL916, UL508, C-UL, CE, RoHS,
^ Special Seismic Certication of
Equipment and Components:
OSP-0201-10
4.500˝ x 5.438˝ x 4.500˝
4.00 lbs.
Notes:
• Output derating may exceed 20% due to
elevated ambient temperature or heat
buildup in device over time.
• To order UL508, add “-IC” to end of
model number.
• Design is in accordance with ASCE 7-05
Chapter 13: ^
www.oshpd.ca.gov/FDD/Pre-Approval/
OSP-0201-10.pdf
PSH40A Series
Enclosed Single 40 VA Power Supplies, 120 to 24 Vac
Made in USA
Meets
“Buy American”
of ARRA 2009
Class 2
AC Power Supply
120 Vac
Convenience Outlet *
RESET
OFF
ON
OFF
LED
Indicator
24 Vac/dc
On/O Switch
24 Vac Breaker
Com 24 Vac
120 Vac Convenience Outlet *
10 Amp Main Breaker/Switch
RESET
OFF
ON
OFF
4.500”
4.250”
4.500”
5.438”
5.150”
5.150”
Specications
Input Wires: “B10˝ Models Only
Input Power Wires
BLK: 120 Vac
WHT: Neutral
GRN: Ground
Output Wires: “B10˝ Models Only
Auxiliary Output
BLU: 120 Vac
All Other Models
Primary Wires
BLK: 120 Vac
WHT: Common
“W˝ Models Only
Transformer Output
WHT/YEL: 24 Vac
WHT/BLU: Common
PSH40A Series Selection Guide
Model #
120 Vac
Outlets
Aux Output
Wire
Main Breaker on
Input Power
Secondary
Conguration
PSH40A • External Terminal Strip
PSH40AN External Terminal Strip
PSH40ANW Internal Wires
PSH40AW • Internal Wires
PSH40AB10* • • 10 Amp Switch / Breaker External Terminal Strip
PSH40ANB10* • 10 Amp Switch / Breaker External Terminal Strip
PSH40ANWB10* • 10 Amp Switch / Breaker Internal Wires
PSH40AWB10* • • 10 Amp Switch / Breaker Internal Wires
Outlet Wires
BLK: 120 Vac
WHT: Neutral
GRN: Ground
* Move internal jumper to “HOT”
position if you wish outlets to
always be hot otherwise outlets
will be switched by main breaker.