Full Swing Launch Monitor Safety Manual Full Swing Launch Monitor Safety Manual Version 2021.05.
Full Swing Launch Monitor Safety Manual Responsible Party Full Swing 1905 Aston Ave Carlsbad, CA 92008 USA +1 800.798.9094 https://www.fullswing.com Disclaimer Full Swing has made every effort to provide clear, complete, and accurate information in the Full Swing Launch Monitor Safety Manual (Safety Manual). Full Swing will not be held responsible for issues arising due to typographical errors, or operator interpretation of the language used herein, that is different from that intended by Full Swing.
Full Swing Launch Monitor Safety Manual Introduction This Safety Manual includes safety guidelines for correct use of the Launch Monitor system, instructions for setting up and using the Launch Monitor system, reference material on Launch Monitor system administrative utilities and diagnostic functions, and a summary of other documentation included with the Launch Monitor system or available from Full Swing. Note: This Safety Manual is included in the purchase of a new Launch Monitor system.
Full Swing Launch Monitor Safety Manual Explanation of Symbols Symbol Meaning Description Caution This symbol indicates a potentially hazardous situation that could result in minor or moderate injury to the Launch Monitor system or operator. The Safety Manual and the safety precautions must be consulted in all cases where this symbol appears. Warning This symbol indicates the presence of hazardous voltages inside the cover (there are no operatorserviceable components inside the Launch Monitor system).
Full Swing Launch Monitor Safety Manual Compliance Statements: Federal Communications Commission (FCC) Statement The equipment described in the Safety Manual generates, and may radiate, radio-frequency energy. If not used in accordance with Full Swing instructions, there may be interference with radio and television reception. Note: The Launch Monitor system has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Full Swing Launch Monitor Safety Manual Proposition 65 STATEMENT OF CALIFORNIA PROPOSITION 65 The Safe Drinking Water and Toxic Enforcement Act (Act) of 1986 is intended to protect the U.S. State of California citizens and State of California drinking water sources, as well as inform citizens about exposure to the presence of specific chemicals.
Full Swing Launch Monitor Safety Manual Safety Precautions These instructions facilitate safe use of the Launch Monitor system. CAUTION: It is important that these instructions be read, kept, and understood by the operator. The instructions and safety requirement protect both the operator and the Launch Monitor system. WARNING: The Launch Monitor system contains hazardous voltages and can produce other emissions that can cause injury to the operator or others.
Full Swing Launch Monitor Safety Manual Do not expose the Launch Monitor system to strong vibration or impact (shock) as the internal mechanisms may be damaged by shock. Do not drop the Launch Monitor system. Do not pinch, step on, drive or ride over the Launch Monitor system cables. Immediately replace any power cords suspected of sustaining damage due to crushing or other forms physical damage.
Full Swing Launch Monitor Safety Manual At a battery temperature of 55°C (131°F), the Launch Monitor system automatically performs a thermal shutdown. To resume use of the Launch Monitor system following a thermal shutdown, turn the Launch Monitor system off, move it to a cooler environment, and keep it turned off until the Launch Monitor system has cooled down to normal use temperatures.
Full Swing Launch Monitor Safety Manual Battery Care The Launch Monitor system contains a lithium-ion battery. Lithium-ion batteries may be subject to special handling requirements pursuant to federal and local laws. Do not handle the Launch Monitor system if the battery is damaged or leaking. Disposal of batteries must be in accordance with local environmental regulations. Storing batteries fully charged or in high temperature conditions may permanently reduce the life of the battery.
Full Swing Launch Monitor Safety Manual Instructions for Charging 1. Locate the USB port on the side of the KIT. 2. Gently lift the USB port cover (do not pull) from the bottom of the USB port. Insert the charging cable into the USB port and into the charger 3. Plug the charger into the wall. Charging begins automatically. While charging, the Light Bar indicates the power level of the battery. Instructions for Safe Installation and Interconnection of the Equipment 1.