Product Specs

ManualsBrandsFULINKS ManualsElectronicsData Collector

Data Collector product specification

1.Specification

Name Data Collector

Functions Used for collect the data signal of the sensor and upload

Communication distance 1KM

Power DC5V/1A

Working Temperature -40℃ ～55℃

Size 210*130*60mm

Weight 1100g

Working frequency 907.2Mhz

2.Appearance

Figure 1. The complete picture

3.Indicator lamp

Figure 2. Front view

Summary of content (4 pages)

PAGE 1
Data Collector product specification 1.Specification Name Data Collector Functions Used for collect the data signal of the sensor and upload Communication distance 1KM Power DC5V/1A Working Temperature -40℃ ～55℃ Size 210*130*60mm Weight 1100g Working frequency 907.2Mhz 2.Appearance Figure 1. The complete picture 3.Indicator lamp Figure 2.
PAGE 2
4.Lamp definition Number Definition Instruction 1 Yellow lamp Flashing light when receiving the data uploaded by the sensor 2 Green lamp Light on indicates that the device is registered and the power supply is normal 3 Blue lamp Flashing every ten seconds indicates normal communication with the gateway 4 Power port Connect to Dedicated Power Supply, 5V/1A DC 5.interface Figure 3. Back view 6.
PAGE 3
FCC ID: 2AU7Z-FLCC100 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 4
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.