User Guide
Table Of Contents
- FUJITSU Tablet STYLISTIC R726
- Contents
- Declarations of conformity
- Fujitsu Contact Information
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching the Tablet PC on
- Switching the Tablet PC off
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape format)
- Using fingers
- Using the stylus (optional, configuration dependent)
- Volume rocker
- Camera
- Rechargeable battery
- Using the energy saving functions
- Memory cards
- Wireless LAN/Bluetooth/NFC wireless components (configuration dependent)
- Ethernet and LAN (only with docking cradle)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Using the security lock (docking cradle only)
- Configuring password protection in BIOS Setup Utility
- Trusted Platform Module - TPM (configuration dependent)
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- Recovering your Factory Image
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the stylus movements
- Stylus input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- Acoustic warning
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Declarations of conformity
- FCC Regulatory Information
- Canada, Industry Canada (IC)
- Appendix
- Index
Tro ubl eshooting and tips
Error message/cause Troubleshooting
CMOS battery bad
If the error message occurs repeate dly, the
buffer battery in the Tablet PC is flat.
► Contact your sales outlet or our
customer
service center.
System CMOS checksum bad - Default configuration
used
The system confi gurat ion info rmation is
incorrect.
► Switch the Tablet PC off.
► Switch th e Tablet PC on.
► In the BIOS Setup, select t
he Exit me nu.
► Select the entry Load Setup Defaults.
► Select OK and press the En
ter key.
Extended memory failed
at offset: xxxx Failing Bits:
zzzz zzzz
When testing the exte n
ded memory. an error
has resulted at the ad
dress xxxx.
► Contact your sales outlet or our customer
service center.
Failure Fix ed Disk
n
The settings of th
e hard disk drive are incorrect.
► Start the BI O S Setup (Primary Master
submenu) and select the correct settings.
Keyboard contro
ller erro r
► Switch your Ta blet PC off with the ON/O FF
button.
► Wait 3 - 5 seconds and switch the Tablet PC
on again.
Keyboard error
If you use an external keyboard:
► Check the connection and reboot the Tablet
PC.
nn Stuck key
► Make sure that no key is pressed.
Operating system not found
► Check in the BIOS Setup whether your hard
disk has been set correctly.
► Make sure t
hat the operating system is
installe
d on the corresponding drive.
Press <F1> to resume, <F2> to SETUP
This erro r message appears if an error occurs
during the self-test before starting the operating
system.
► Press th
e volume up button to start the
BIOS Set
up.
or
► If you use an external keyboard, pre ss
the
F1
or
F2
key on the keyboard.
Real time clock error
► Conta
ct your sales outlet or our customer
serv
ice center.
nnn
nK Shadow RAM failed at offset: xxxx F ailing
Bit
s: zzzz
► Contact your sales outlet or our customer
service center.
System battery is dead - Replace and run SETUP
► Contact your sales outlet or our customer
service center.
System cache error - Cache disabled
► Co
ntact your sales outlet or our customer
s
ervice center.
System timer error
► Contact your sales outlet or our customer
service center.
Fujitsu 79